[Gluster-users] file corruption on Gluster 3.5.1 and Ubuntu 14.04

mike mike at luminatewireless.com
Sun Sep 7 16:51:03 UTC 2014


I don't think I have these enabled. How can I confirm that?

On Sep 7, 2014, at 12:57 AM, Anand Avati <avati at gluster.org> wrote:

> The only reason O_APPEND gets stripped on the server side, is because of one of the following xlators:
> 
> - stripe
> - quiesce
> - crypt
> 
> If you have any of these, please try unloading/reconfiguring without these features and try again.
> 
> Thanks
> 
> 
> On Sat, Sep 6, 2014 at 3:31 PM, mike <mike at luminatewireless.com> wrote:
> I was able to narrow it down to smallish python script.
> 
> I've attached that to the bug.
> 
> https://bugzilla.redhat.com/show_bug.cgi?id=1138970
> 
> 
> On Sep 6, 2014, at 1:05 PM, Justin Clift <justin at gluster.org> wrote:
> 
> > Thanks Mike, this is good stuff. :)
> >
> > + Justin
> >
> >
> > On 06/09/2014, at 8:19 PM, mike wrote:
> >> I upgraded the client to Gluster 3.5.2, but there is no difference.
> >>
> >> The bug is almost certainly in the Fuse client. If I remount the filesystem with NFS, the problem is no longer observable.
> >>
> >> I spent a little time looking through the xlator/fuse-bridge to see where the offsets are coming from, but I'm really not familiar enough with the code, so it is slow going.
> >>
> >> Unfortunately, I'm still having trouble reproducing this in a python script that could be readily attached to a bug report.
> >>
> >> I'll take a crack at that again, but I will a file a bug anyway for completeness.
> >>
> >> On Sep 5, 2014, at 7:10 PM, mike <mike at luminatewireless.com> wrote:
> >>
> >>> I have narrowed down the source of the bug.
> >>>
> >>> Here is an strace of glusterfsd http://fpaste.org/131455/40996378/
> >>>
> >>> The first line represents a write that does *not* make it into the underlying file.
> >>>
> >>> The last line is the write that stomps the earlier write.
> >>>
> >>> As I said, the client file is opened in O_APPEND mode, but on the glusterfsd side, the file is just O_CREAT|O_WRONLY. The means the offsets to pwrite() need to be valid.
> >>>
> >>> I correlated this to a tcpdump I took and I can see that in fact, the RPCs being sent have the wrong offset.  Interestingly, glusterfs.write-is-append = 0, which I wouldn't have expected.
> >>>
> >>> I think the bug lies in the glusterfs fuse client.
> >>>
> >>> As to your question about Gluster 3.5.2, I may be able to do that if I am unable to find the bug in the source.
> >>>
> >>> -Mike
> >>>
> >>> On Sep 5, 2014, at 6:16 PM, Justin Clift <justin at gluster.org> wrote:
> >>>
> >>>> On 06/09/2014, at 12:10 AM, mike wrote:
> >>>>> I have found that the O_APPEND flag is key to this failure - I had overlooked that flag when reading the strace and trying to cobble up a minimal reproduction.
> >>>>>
> >>>>> I now have a small pair of python scripts that can reliably reproduce this failure.
> >>>>
> >>>>
> >>>> As a thought, is there a reasonable way you can test this on GlusterFS 3.5.2?
> >>>>
> >>>> There were some important bug fixes in 3.5.2 (from 3.5.1).
> >>>>
> >>>> Note I'm not saying yours is one of them, I'm just asking if it's
> >>>> easy to test and find out. :)
> >>>>
> >>>> Regards and best wishes,
> >>>>
> >>>> Justin Clift
> >>>>
> >>>> --
> >>>> GlusterFS - http://www.gluster.org
> >>>>
> >>>> An open source, distributed file system scaling to several
> >>>> petabytes, and handling thousands of clients.
> >>>>
> >>>> My personal twitter: twitter.com/realjustinclift
> >>>>
> >>>
> >>
> >
> > --
> > GlusterFS - http://www.gluster.org
> >
> > An open source, distributed file system scaling to several
> > petabytes, and handling thousands of clients.
> >
> > My personal twitter: twitter.com/realjustinclift
> >
> 
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://supercolony.gluster.org/mailman/listinfo/gluster-users
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20140907/eca14cf0/attachment.html>


More information about the Gluster-users mailing list