[Gluster-users] ACL issue with 3.4.0 GA + XFS + native client?

[Nicholas Majeran]

FWIW, I tried to disable the parameter on a stopped volume, which was 
successful.  I then started the volume and I could get/set the ACLs 
normally.

I'm going to try the same procedure on the gv0 volume that threw the 
error previously.
Thanks.

On 07/23/2013 02:29 PM, Nicholas Majeran wrote:
> When I tried to disable that parameter, I receive the following:
>
> gluster> volume set gv0 stat-prefetch off
> volume set: failed: One or more connected clients cannot support the 
> feature being set. These clients need to be upgraded or disconnected 
> before running this command again
>
> AFAICT, all the nodes are at the same version, but I did this this in 
> the logs I after I ran the command:
>
> [2013-07-23 19:26:02.673304] E 
> [glusterd-op-sm.c:370:glusterd_check_client_op_version_support] 
> 0-management: One or more clients don't support the required op-version
> [2013-07-23 19:26:02.673325] E 
> [glusterd-syncop.c:767:gd_stage_op_phase] 0-management: Staging of 
> operation 'Volume Set' failed on localhost : One or more connected 
> clients cannot support the feature being set. These clients need to be 
> upgraded or disconnected before running this command again
> [2013-07-23 19:26:03.590547] E [socket.c:2788:socket_connect] 
> 0-management: connection attempt failed (Connection refused)
> [2013-07-23 19:26:06.591224] E [socket.c:2788:socket_connect] 
> 0-management: connection attempt failed (Connection refused)
> [2013-07-23 19:26:09.591912] E [socket.c:2788:socket_connect] 
> 0-management: connection attempt failed (Connection refused)
> [2013-07-23 19:26:12.592601] E [socket.c:2788:socket_connect] 
> 0-management: connection attempt failed (Connection refused)
> [2013-07-23 19:26:15.593282] E [socket.c:2788:socket_connect] 
> 0-management: connection attempt failed (Connection refused)
> [2013-07-23 19:26:18.593946] E [socket.c:2788:socket_connect] 
> 0-management: connection attempt failed (Connection refused)
>
>
> On 07/23/2013 01:45 PM, Vijay Bellur wrote:
>> On 07/23/2013 09:28 PM, Nicholas Majeran wrote:
>>> A little more detail... on files, I still can't get this to work, but
>>> when I run ls and {get,set}facl on . it seems to work:
>>>
>>> [root at s1 tmp]# pwd
>>> /mnt/glusterfs/tmp
>>> [root at s1 tmp]# ls -ld .
>>> drwxrwxr-x+ 4 nmajeran root 4422 Jul 22 15:29 .
>>> [root at suncosmbgw1 tmp]# ls -ld ../tmp
>>> drwxrwxr-x 4 nmajeran root 4422 Jul 22 15:29 ../tmp
>>> [root at s1 tmp]# getfacl .
>>> # file: .
>>> # owner: nmajeran
>>> # group: root
>>> user::rwx
>>> user:root:rwx
>>> user:user1:rwx
>>> group::r-x
>>> group:g1:rwx
>>> group:g2:r-x
>>> group:g3:r-x
>>> mask::rwx
>>> other::r-x
>>>
>>> [root at s1 tmp]# getfacl ../tmp
>>> # file: ../tmp
>>> # owner: nmajeran
>>> # group: root
>>> user::rwx
>>> group::rwx
>>> other::r-x
>>>
>>
>>
>> Does disabling stat-prefetch address the problem permanently? You can 
>> disable stat-prefetch via:
>>
>> gluster volume set <volname> stat-prefetch off
>>
>> -Vijay
>>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://supercolony.gluster.org/mailman/listinfo/gluster-users