[Gluster-users] Glusterfs gives up with endpoint not connected
Ben Turner
bturner at redhat.com
Tue Apr 2 18:40:08 UTC 2013
It looks like you are having problems with your back end storage. You may have some FS corruption that is causing the filesystems you use for bricks to get mounted read only. Do you see any messages like:
Apr 8 03:41:54 bucket kernel: Remounting filesystem read-only
If you see read only remounts then you probably have some FS corruption and should FSCK your filesystem. Also:
Mar 28 13:21:32 tuepdc kernel: SCSI device sdd: drive cache: write back
Mar 28 13:21:32 tuepdc kernel: SCSI device sde: 1953525168 512-byte hdwr sectors (1000205 MB)
These messages are generated when you scan the SCSI bus/create SCSI devices, maybe you are having connectivity/controller issues? Your block devices flapping like that could cause the RO remounts and/or FS corruption. I would attempt to resolve any backend storage storage issue and FSCK the FSs as this seems to be a problem with your bricks not being available and RW.
-b
----- Original Message -----
> From: "Daniel Müller" <mueller at tropenklinik.de>
> To: mueller at tropenklinik.de, "Pranith Kumar K" <pkarampu at redhat.com>
> Cc: "Reinhard Marstaller" <marstaller at tropenklinik.de>, gluster-users at gluster.org
> Sent: Thursday, March 28, 2013 9:16:35 AM
> Subject: Re: [Gluster-users] Glusterfs gives up with endpoint not connected
>
> The tird part, output /var/log/messages concerning raid5 hs:
>
> [root at tuepdc /]# tail -f /var/log/messages
> Mar 28 13:21:32 tuepdc kernel: SCSI device sdd: drive cache: write back
> Mar 28 13:21:32 tuepdc kernel: SCSI device sde: 1953525168 512-byte hdwr
> sectors (1000205 MB)
> Mar 28 13:21:32 tuepdc kernel: sde: Write Protect is off
> Mar 28 13:21:32 tuepdc kernel: SCSI device sde: drive cache: write back
> Mar 28 13:21:32 tuepdc kernel: SCSI device sdf: 1953525168 512-byte hdwr
> sectors (1000205 MB)
> Mar 28 13:21:32 tuepdc kernel: sdf: Write Protect is off
> Mar 28 13:21:32 tuepdc kernel: SCSI device sdf: drive cache: write back
> Mar 28 13:21:32 tuepdc kernel: SCSI device sdg: 1953525168 512-byte hdwr
> sectors (1000205 MB)
> Mar 28 13:21:32 tuepdc kernel: sdg: Write Protect is off
> Mar 28 13:21:32 tuepdc kernel: SCSI device sdg: drive cache: write back
>
> -----------------------------------------------
> EDV Daniel Müller
>
> Leitung EDV
> Tropenklinik Paul-Lechler-Krankenhaus
> Paul-Lechler-Str. 24
> 72076 Tübingen
>
> Tel.: 07071/206-463, Fax: 07071/206-499
> eMail: mueller at tropenklinik.de
> Internet: www.tropenklinik.de
> -----------------------------------------------
>
> -----Ursprüngliche Nachricht-----
> Von: gluster-users-bounces at gluster.org
> [mailto:gluster-users-bounces at gluster.org] Im Auftrag von Daniel Müller
> Gesendet: Donnerstag, 28. März 2013 13:57
> An: 'Pranith Kumar K'
> Cc: 'Reinhard Marstaller'; gluster-users at gluster.org
> Betreff: Re: [Gluster-users] Glusterfs gives up with endpoint not connected
>
> Now part to of raid5hs-glusterfs-export.log
>
> attr (utimes) on
> /raid5hs/glusterfs/export/windows/winuser/schneider/schneider/V
> erwaltung/baumma<DF>nahmen/Bauvorhaben
> Umsetzung/Parkierung/SKIZZE_TPLK_Lageplan
> .pdf failed: Read-only file system
> pending frames:
>
> patchset: v3.2.0
> signal received: 11
> time of crash: 2013-03-25 22:50:46
> configuration details:
> argp 1
> backtrace 1
> dlfcn 1
> fdatasync 1
> libpthread 1
> llistxattr 1
> setfsid 1
> spinlock 1
> epoll.h 1
> xattr.h 1
> st_atim.tv_nsec 1
> package-string: glusterfs 3.2.0
> /lib64/libc.so.6[0x30c0a302d0]
> /opt/glusterfs/3.2.0/lib64/glusterfs/3.2.0/xlator/features/marker.so(marker_
> setattr_cbk+0x139)[0x2aaaaba9de79]
> /opt/glusterfs/3.2.0/lib64/glusterfs/3.2.0/xlator/performance/io-threads.so(
> iot_setattr_cbk+0x88)[0x2aaaab88d718]
> /opt/glusterfs/3.2.0/lib64/libglusterfs.so.0(default_setattr_cbk+0x88)[0x2b1
> a834a5f28]
> /opt/glusterfs/3.2.0/lib64/libglusterfs.so.0(default_setattr_cbk+0x88)[0x2b1
> a834a5f28]
> /opt/glusterfs/3.2.0/lib64/glusterfs/3.2.0/xlator/storage/posix.so(posix_set
> attr+0x1fc)[0x2aaaab2560bc]
> /opt/glusterfs/3.2.0/lib64/glusterfs/3.2.0/xlator/features/access-control.so
> (ac_setattr_resume+0xe9)[0x2aaaab469039]
> /opt/glusterfs/3.2.0/lib64/glusterfs/3.2.0/xlator/features/access-control.so
> (ac_setattr+0x49)[0x2aaaab46a979]
> /opt/glusterfs/3.2.0/lib64/libglusterfs.so.0(default_setattr+0xe9)[0x2b1a834
> 9f659]
> /opt/glusterfs/3.2.0/lib64/glusterfs/3.2.0/xlator/performance/io-threads.so(
> iot_setattr_wrapper+0xe9)[0x2aaaab890749]
> /opt/glusterfs/3.2.0/lib64/libglusterfs.so.0(call_resume+0xd81)[0x2b1a834b01
> 91]
> /opt/glusterfs/3.2.0/lib64/glusterfs/3.2.0/xlator/performance/io-threads.so(
> iot_worker+0x119)[0x2aaaab894229]
> /lib64/libpthread.so.0[0x30c160673d]
> /lib64/libc.so.6(clone+0x6d)[0x30c0ad44bd]
> ---------
> [2013-03-26 08:04:48.577056] W [socket.c:419:__socket_keepalive] 0-socket:
> failed to set keep idle on socket 8
> [2013-03-26 08:04:48.613068] W [socket.c:1846:socket_server_event_handler]
> 0-socket.glusterfsd: Failed to set keep-alive: Operation not supported
> [2013-03-26 08:04:49.187484] W [graph.c:274:gf_add_cmdline_options]
> 0-sambavol-server: adding option 'listen-port' for volume 'sambavol-server'
> with value '24009'
> [2013-03-26 08:04:49.253395] W [rpc-transport.c:447:validate_volume_options]
> 0-tcp.sambavol-server: option 'listen-port' is deprecated, preferred is
> 'transport.socket.listen-port', continuing with correction
> [2013-03-26 08:04:49.287651] E [posix.c:4369:init] 0-sambavol-posix:
> Directory '/raid5hs/glusterfs/export' doesn't exist, exiting.
> [2013-03-26 08:04:49.287709] E [xlator.c:1390:xlator_init] 0-sambavol-posix:
> Initialization of volume 'sambavol-posix' failed, review your volfile again
> [2013-03-26 08:04:49.287721] E [graph.c:331:glusterfs_graph_init]
> 0-sambavol-posix: initializing translator failed
> [2013-03-26 08:04:49.287731] E [graph.c:503:glusterfs_graph_activate]
> 0-graph: init failed
> [2013-03-26 08:04:49.287982] W [glusterfsd.c:700:cleanup_and_exit]
> (-->/opt/glusterfs/3.2.0/lib64/libgfrpc.so.0(rpc_clnt_handle_reply+0xa2)
> [0x2b38e21d63d2] (--:
>
> -----------------------------------------------
> EDV Daniel Müller
>
> Leitung EDV
> Tropenklinik Paul-Lechler-Krankenhaus
> Paul-Lechler-Str. 24
> 72076 Tübingen
>
> Tel.: 07071/206-463, Fax: 07071/206-499
> eMail: mueller at tropenklinik.de
> Internet: www.tropenklinik.de
> -----------------------------------------------
>
> -----Ursprüngliche Nachricht-----
> Von: Pranith Kumar K [mailto:pkarampu at redhat.com]
> Gesendet: Donnerstag, 28. März 2013 12:34
> An: mueller at tropenklinik.de
> Cc: gluster-users at gluster.org; Reinhard Marstaller
> Betreff: Re: [Gluster-users] Glusterfs gives up with endpoint not connected
>
> On 03/28/2013 03:48 PM, Daniel Müller wrote:
> > Dear all,
> >
> > Right out of the blue glusterfs is not working fine any more every now
> > end the it stops working telling me, Endpoint not connected and
> > writing core files:
> >
> > [root at tuepdc /]# file core.15288
> > core.15288: ELF 64-bit LSB core file AMD x86-64, version 1 (SYSV),
> > SVR4-style, from 'glusterfs'
> >
> > My Version:
> > [root at tuepdc /]# glusterfs --version
> > glusterfs 3.2.0 built on Apr 22 2011 18:35:40 Repository revision:
> > v3.2.0 Copyright (c) 2006-2010 Gluster Inc. <http://www.gluster.com>
> > GlusterFS comes with ABSOLUTELY NO WARRANTY.
> > You may redistribute copies of GlusterFS under the terms of the GNU
> > Affero General Public License.
> >
> > My /var/log/glusterfs/bricks/raid5hs-glusterfs-export.log
> >
> > [2013-03-28 10:47:07.243980] I [server.c:438:server_rpc_notify]
> > 0-sambavol-server: disconnected connection from 192.168.130.199:1023
> > [2013-03-28 10:47:07.244000] I
> > [server-helpers.c:783:server_connection_destroy] 0-sambavol-server:
> > destroyed connection of
> > tuepdc.local-16600-2013/03/28-09:32:28:258428-sambavol-client-0
> >
> >
> > [root at tuepdc bricks]# gluster volume info
> >
> > Volume Name: sambavol
> > Type: Replicate
> > Status: Started
> > Number of Bricks: 2
> > Transport-type: tcp
> > Bricks:
> > Brick1: 192.168.130.199:/raid5hs/glusterfs/export
> > Brick2: 192.168.130.200:/raid5hs/glusterfs/export
> > Options Reconfigured:
> > network.ping-timeout: 5
> > performance.quick-read: on
> >
> > Gluster is running on ext3 raid5 HS on both hosts [root at tuepdc
> > bricks]# mdadm --detail /dev/md0
> > /dev/md0:
> > Version : 0.90
> > Creation Time : Wed May 11 10:08:30 2011
> > Raid Level : raid5
> > Array Size : 1953519872 (1863.02 GiB 2000.40 GB)
> > Used Dev Size : 976759936 (931.51 GiB 1000.20 GB)
> > Raid Devices : 3
> > Total Devices : 4
> > Preferred Minor : 0
> > Persistence : Superblock is persistent
> >
> > Update Time : Thu Mar 28 11:13:21 2013
> > State : clean
> > Active Devices : 3
> > Working Devices : 4
> > Failed Devices : 0
> > Spare Devices : 1
> >
> > Layout : left-symmetric
> > Chunk Size : 64K
> >
> > UUID : c484e093:018a2517:56e38f5e:1a216491
> > Events : 0.250
> >
> > Number Major Minor RaidDevice State
> > 0 8 49 0 active sync /dev/sdd1
> > 1 8 65 1 active sync /dev/sde1
> > 2 8 97 2 active sync /dev/sdg1
> >
> > 3 8 81 - spare /dev/sdf1
> >
> > [root at tuepdc glusterfs]# tail -f mnt-glusterfs.log
> > [2013-03-28 10:57:40.882566] I [rpc-clnt.c:1531:rpc_clnt_reconfig]
> > 0-sambavol-client-0: changing port to 24009 (from 0)
> > [2013-03-28 10:57:40.883636] I [rpc-clnt.c:1531:rpc_clnt_reconfig]
> > 0-sambavol-client-1: changing port to 24009 (from 0)
> > [2013-03-28 10:57:44.806649] I
> > [client-handshake.c:1080:select_server_supported_programs]
> > 0-sambavol-client-0: Using Program GlusterFS-3.1.0, Num (1298437),
> > Version
> > (310)
> > [2013-03-28 10:57:44.806857] I
> > [client-handshake.c:913:client_setvolume_cbk]
> > 0-sambavol-client-0: Connected to 192.168.130.199:24009, attached to
> > remote volume '/raid5hs/glusterfs/export'.
> > [2013-03-28 10:57:44.806876] I [afr-common.c:2514:afr_notify]
> > 0-sambavol-replicate-0: Subvolume 'sambavol-client-0' came back up;
> > going online.
> > [2013-03-28 10:57:44.811557] I [fuse-bridge.c:3316:fuse_graph_setup]
> 0-fuse:
> > switched to graph 0
> > [2013-03-28 10:57:44.811773] I [fuse-bridge.c:2897:fuse_init]
> > 0-glusterfs-fuse: FUSE inited with protocol versions: glusterfs 7.13
> > kernel 7.10
> > [2013-03-28 10:57:44.812139] I [afr-common.c:836:afr_fresh_lookup_cbk]
> > 0-sambavol-replicate-0: added root inode
> > [2013-03-28 10:57:44.812217] I
> > [client-handshake.c:1080:select_server_supported_programs]
> > 0-sambavol-client-1: Using Program GlusterFS-3.1.0, Num (1298437),
> > Version
> > (310)
> > [2013-03-28 10:57:44.812767] I
> > [client-handshake.c:913:client_setvolume_cbk]
> > 0-sambavol-client-1: Connected to 192.168.130.200:24009, attached to
> > remote volume '/raid5hs/glusterfs/export'.
> >
> >
> >
> >
> > How can I fix this issue!??
> >
> > Daniel
> >
> > -----------------------------------------------
> > EDV Daniel Müller
> >
> > Leitung EDV
> > Tropenklinik Paul-Lechler-Krankenhaus
> > Paul-Lechler-Str. 24
> > 72076 Tübingen
> >
> > Tel.: 07071/206-463, Fax: 07071/206-499
> > eMail: mueller at tropenklinik.de
> > Internet: www.tropenklinik.de
> > -----------------------------------------------
> >
> > _______________________________________________
> > Gluster-users mailing list
> > Gluster-users at gluster.org
> > http://supercolony.gluster.org/mailman/listinfo/gluster-users
> Could you paste the traceback that is printed in the log file of the mount
> for that crash.
>
> search for "crash" in the logs. You will see the trace after that. Paste
> that here.
>
> Pranith.
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://supercolony.gluster.org/mailman/listinfo/gluster-users
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://supercolony.gluster.org/mailman/listinfo/gluster-users
>
More information about the Gluster-users
mailing list