[Gluster-users] Gluster client can't connect to Gluster volume
Eric
epretorious at yahoo.com
Sat May 5 18:00:31 UTC 2012
Thanks, David:
That's fine. If it's just a version-mismatch I can accept that. I'm sure that the developers at Mageia are working on catching-up in Mageia, Version 2. I just figured that, if it were a version-mismatch, I'd see something to that effect in the servers' log files. That's all.
Eric Pretorious
Truckee, CA
>________________________________
> From: David Coulson <david at davidcoulson.net>
>To: Eric <epretorious at yahoo.com>
>Cc: "gluster-users at gluster.org" <gluster-users at gluster.org>
>Sent: Saturday, May 5, 2012 10:46 AM
>Subject: Re: [Gluster-users] Gluster client can't connect to Gluster volume
>
>
>There's probably not a whole lot of 'fixing' since the two versions are so different.
>
>You can tell the package maintainer to make a 3.2.6 build. That'll
help.
>
>On 5/5/12 1:43 PM, Eric wrote:
>Thanks, David:
>>
>>But I'd rather see if I can fix the problem with the Mageia
client (glusterfs-client-3.0.0-2.mga1):
>> * This will allow me to file a bug report with the package maintainer (if necessary).
>> * I already know that the systems that have Gluster 3.2.6 from source [i.e., the storage nodes] are able to mount the volume.
>> * I'd rather keep my daily-driver (i.e., the host system) 100% Mageia.
>>Eric Pretorious
>>Truckee, CA
>>
>>
>>
>>>________________________________
>>> From: David Coulson <david at davidcoulson.net>
>>>To: Eric <epretorious at yahoo.com>
>>>Cc: "gluster-users at gluster.org" <gluster-users at gluster.org>
>>>Sent: Saturday, May 5, 2012 9:16 AM
>>>Subject: Re: [Gluster-users] Gluster client can't connect to Gluster volume
>>>
>>>
>>>That's way old documentation.
>>>
>>>Start by installing 3.2.6 on your client and see if
it works then. I don't think anyone expects 3.2 and
3.0 to work correctly.
>>>
>>>On 5/5/12 12:09 PM, Eric wrote:
>>>Thanks, David:
>>>>
>>>>
>>>>Yes...
>>>> * iptables has been disabled on all three systems.
>>>> * SELinux is set to permissive on the two systems that employ it - the two CentOS nodes.
>>>> * Port #6996 is referenced in the Troubleshooting section of the Gluster User Guide.
>>>>FWIW: All of this except the SELinux question is already documented in my post on the Mageia Forum.
>>>>
>>>>
>>>>Eric Pretorious
>>>>Truckee, CA
>>>>
>>>>
>>>>
>>>>>________________________________
>>>>> From: David Coulson <david at davidcoulson.net>
>>>>>To: Eric <epretorious at yahoo.com>
>>>>>Cc: "gluster-users at gluster.org" <gluster-users at gluster.org>
>>>>>Sent: Saturday, May 5, 2012 5:44 AM
>>>>>Subject: Re: [Gluster-users] Gluster client can't connect to Gluster volume
>>>>>
>>>>>
>>>>>Do you have any firewall rules enabled? I'd start by disabling iptables (or at least setting everything to ACCEPT) and as someone else suggested setting selinux to permissive/disabled.
>>>>>
>>>>>Why are your nodes and client using
different versions of Gluster? Why
not just use the 3.2.6 version for
everything? Also, I'm not sure where
port 6996 comes from - Gluster uses
24007 for it's core communications
and ports above that for individual
bricks.
>>>>>
>>>>>David
>>>>>
>>>>>On 5/5/12 12:27 AM, Eric wrote:
>>>>>Hi, All:
>>>>>>
>>>>>>I've built a Gluster-based
storage cluster on a pair of
CentOS 5.7 (i386) VM's. The
nodes are using Gluster 3.2.6
(from source) and the host is
using Gluster 3.0.0 (from the
Mageia package repositories):
>>>>>>
>>>>>>
>>>>>>[eric at node1 ~]$ sudo /usr/local/sbin/gluster --version
>>>>>>glusterfs 3.2.6 built on
May 3 2012 15:53:02
>>>>>>
>>>>>>[eric at localhost ~]$ rpm -qa | grep glusterfs
>>>>>>glusterfs-common-3.0.0-2.mga1
>>>>>>glusterfs-client-3.0.0-2.mga1
>>>>>>glusterfs-server-3.0.0-2.mga1
>>>>>>libglusterfs0-3.0.0-2.mga1
>>>>>>
>>>>>>
>>>>>>None of the systems (i.e., neither the two storage nodes nor the client) can connect to Port 6996 of the cluster (node1.example.com & node2.example.com) but the two storage nodes can mount the shared volume using the Gluster helper and/or NFS:
>>>>>>
>>>>>>
>>>>>>[eric at node1 ~]$ sudo /sbin/lsmod | grep fuse
>>>>>>
>>>>>>[eric at node1 ~]$ sudo
/sbin/modprobe fuse
>>>>>>
>>>>>>[eric at node1 ~]$ sudo
/sbin/lsmod | grep fuse
>>>>>>fuse
49237 0
>>>>>>
>>>>>>[eric at node1 ~]$ sudo mount
-t glusterfs node1:/mirror-1
/mnt
>>>>>>
>>>>>>[eric at node1 ~]$ sudo grep
gluster /etc/mtab
>>>>>>glusterfs#node1:/mirror-1
/mnt fuse
rw,allow_other,default_permissions,max_read=131072
0 0
>>>>>>
>>>>>>
>>>>>>...but the host system is only able to connect using NFS:
>>>>>>
>>>>>>
>>>>>>[eric at localhost ~]$ sudo glusterfs --debug -f /tmp/glusterfs.vol /mnt
>>>>>>[2012-05-04 19:09:09] D
[glusterfsd.c:424:_get_specfp]
glusterfs: loading volume
file /tmp/glusterfs.vol
>>>>>>================================================================================
>>>>>>Version : glusterfs
3.0.0 built on Apr 10 2011
19:12:54
>>>>>>git: 2.0.1-886-g8379edd
>>>>>>Starting Time: 2012-05-04
19:09:09
>>>>>>Command line : glusterfs
--debug -f
/tmp/glusterfs.vol /mnt
>>>>>>PID : 30159
>>>>>>System name : Linux
>>>>>>Nodename :
localhost.localdomain
>>>>>>Kernel Release :
2.6.38.8-desktop586-10.mga
>>>>>>Hardware Identifier: i686
>>>>>>
>>>>>>Given volfile:
>>>>>>+------------------------------------------------------------------------------+
>>>>>> 1: volume mirror-1
>>>>>> 2: type protocol/client
>>>>>> 3: option transport-type
tcp
>>>>>> 4: option remote-host
node1.example.com
>>>>>> 5: option
remote-subvolume mirror-1
>>>>>> 6: end-volume
>>>>>>+------------------------------------------------------------------------------+
>>>>>>[2012-05-04 19:09:09] D
[glusterfsd.c:1335:main]
glusterfs: running in pid
30159
>>>>>>[2012-05-04 19:09:09] D
[client-protocol.c:6581:init]
mirror-1: defaulting
frame-timeout to 30mins
>>>>>>[2012-05-04 19:09:09] D
[client-protocol.c:6592:init]
mirror-1: defaulting
ping-timeout to 42
>>>>>>[2012-05-04 19:09:09] D
[transport.c:145:transport_load]
transport: attempt to load
file
/usr/lib/glusterfs/3.0.0/transport/socket.so
>>>>>>[2012-05-04 19:09:09] D
[transport.c:145:transport_load]
transport: attempt to load
file
/usr/lib/glusterfs/3.0.0/transport/socket.so
>>>>>>[2012-05-04 19:09:09] D
[client-protocol.c:7005:notify]
mirror-1: got
GF_EVENT_PARENT_UP,
attempting connect on
transport
>>>>>>[2012-05-04 19:09:09] D
[client-protocol.c:7005:notify]
mirror-1: got
GF_EVENT_PARENT_UP,
attempting connect on
transport
>>>>>>[2012-05-04 19:09:09] D
[client-protocol.c:7005:notify]
mirror-1: got
GF_EVENT_PARENT_UP,
attempting connect on
transport
>>>>>>[2012-05-04 19:09:09] D
[client-protocol.c:7005:notify]
mirror-1: got
GF_EVENT_PARENT_UP,
attempting connect on
transport
>>>>>>[2012-05-04 19:09:09] N
[glusterfsd.c:1361:main]
glusterfs: Successfully
started
>>>>>>[2012-05-04 19:09:09] E
[socket.c:760:socket_connect_finish]
mirror-1: connection to
failed (Connection refused)
>>>>>>[2012-05-04 19:09:09] D
[fuse-bridge.c:3079:fuse_thread_proc]
fuse: pthread_cond_timedout
returned non zero value ret:
0 errno: 0
>>>>>>[2012-05-04 19:09:09] N
[fuse-bridge.c:2931:fuse_init]
glusterfs-fuse: FUSE inited
with protocol versions:
glusterfs 7.13 kernel 7.16
>>>>>>[2012-05-04 19:09:09] E
[socket.c:760:socket_connect_finish]
mirror-1: connection to
failed (Connection refused)
>>>>>>
>>>>>>
>>>>>>I've read through the Troubleshooting section of the Gluster Administration Guide and the Gluster User Guide but can't seem to resolve the problem. (See my post on the Mageia Forum for all the troubleshooting details: https://forums.mageia.org/en/viewtopic.php?f=7&t=2358&p=17517)
>>>>>>
>>>>>>
>>>>>>What might be causing this?
>>>>>>
>>>>>>TIA,
>>>>>>Eric Pretorious
>>>>>>Truckee, CA
>>>>>>
>>>>>>
>>>>>>https://forums.mageia.org/en/viewtopic.php?f=7&t=2358&p=17517
>>>>>>
>>>>>>
>>>>>>_______________________________________________
Gluster-users mailing list Gluster-users at gluster.org http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>>>>>
>>>>>
>>>
>>>
>>
>>
>>_______________________________________________
Gluster-users mailing list Gluster-users at gluster.org http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20120505/13646477/attachment.html>
More information about the Gluster-users
mailing list