[Gluster-users] Issue running GlusterFS on CentOS 6

Fri Jan 13 17:51:02 UTC 2012

You do not need to roll your own vol files in Gluster 3.2, nor should 
you unless you have a very special use-case.  Any reason you are not 
using the init script that comes with the RPM to start glusterd?  Are 
you using this guide?  http://goo.gl/35zUq

Jeff White - Linux/Unix Systems Engineer
University of Pittsburgh - CSSD

On 01/13/2012 09:04 AM, Kwasi Gyasi - Agyei wrote:
> Hi,
>
>
> After installing GlusterFS 3.2.5 using yum on 32bit machine I came
> across an issue I don't quite understand.
>
> 1. Executing the command # glustered -start , does nothing it appears
> that you can just start GlusterFS with command # glusterd
> 2. glistered expected a file /etc/glusterfs/glusterd.vol , this is not
> documented in administration guide
>
> I created a vol file as expected bu glusterFS, but when I start it up
> in debug mode
>
> # gluster --debug
>
> I get the following, not sure if this means it is up and running,
>
> [2012-01-13 06:17:31.808266] I [glusterfsd.c:1493:main] 0-glusterd:
> Started running glusterd version 3.2.5
> [2012-01-13 06:17:31.808472] D [glusterfsd.c:374:get_volfp]
> 0-glusterfsd: loading volume file /etc/glusterfs/glusterd.vol
> [2012-01-13 06:17:31.809319] D [xlator.c:1302:xlator_dynload]
> 0-xlator: dlsym(reconfigure) on
> /usr/lib/glusterfs/3.2.5/xlator/storage/posix.so: undefined symbol:
> reconfigure -- neglecting
> [2012-01-13 06:17:31.809394] D [xlator.c:1308:xlator_dynload]
> 0-xlator: dlsym(validate_options) on
> /usr/lib/glusterfs/3.2.5/xlator/storage/posix.so: undefined symbol:
> validate_options -- neglecting
> [2012-01-13 06:17:31.809702] D [xlator.c:1285:xlator_dynload]
> 0-xlator: dlsym(notify) on
> /usr/lib/glusterfs/3.2.5/xlator/features/posix-locks.so: undefined
> symbol: notify -- neglecting
> [2012-01-13 06:17:31.809789] D [xlator.c:1302:xlator_dynload]
> 0-xlator: dlsym(reconfigure) on
> /usr/lib/glusterfs/3.2.5/xlator/features/posix-locks.so: undefined
> symbol: reconfigure -- neglecting
> [2012-01-13 06:17:31.809882] D [xlator.c:1308:xlator_dynload]
> 0-xlator: dlsym(validate_options) on
> /usr/lib/glusterfs/3.2.5/xlator/features/posix-locks.so: undefined
> symbol: validate_options -- neglecting
> [2012-01-13 06:17:31.811481] D [rpcsvc.c:1771:rpcsvc_init]
> 0-rpc-service: RPC service inited.
> [2012-01-13 06:17:31.811570] D [rpcsvc.c:1568:rpcsvc_program_register]
> 0-rpc-service: New program registered: GF-DUMP, Num: 123451501, Ver:
> 1, Port: 0
> [2012-01-13 06:17:31.811658] D
> [rpc-transport.c:673:rpc_transport_load] 0-rpc-transport: attempt to
> load file /usr/lib/glusterfs/3.2.5/rpc-transport/socket.so
> [2012-01-13 06:17:31.811938] D [name.c:552:server_fill_address_family]
> 0-tcp.server: option address-family not specified, defaulting to
> inet/inet6
> [2012-01-13 06:17:31.812305] D [rpcsvc.c:1568:rpcsvc_program_register]
> 0-rpc-service: New program registered: GlusterFS 3.2.5, Num: 1298437,
> Ver: 310, Port: 0
> [2012-01-13 06:17:31.812368] D [rpcsvc.c:1568:rpcsvc_program_register]
> 0-rpc-service: New program registered: GlusterFS Handshake, Num:
> 14398633, Ver: 1, Port: 0
> [2012-01-13 06:17:31.812469] W [posix.c:4733:init] 0-raw: Posix access
> control list is not supported.
> Given volfile:
> +------------------------------------------------------------------------------+
>   1: volume raw
>   2:    type storage/posix
>   3:    option directory /fileserver
>   4: end-volume
>   5:
>   6: volume brick
>   7:    type features/posix-locks
>   8:    subvolumes raw
>   9: end-volume
>   10:
>   11: volume server
>   12:    type protocol/server
>   13:    option transport-type tcp
>   14:    subvolumes brick
>   15:    option auth.addr.brick.allow *
>   16: end-volume
>
> +------------------------------------------------------------------------------+
>
> when I issue command #gluster peer probe hostname on the same machine
> running glusterFS, I get the following
>
> [2012-01-13 06:20:47.382363] W [rpcsvc.c:148:rpcsvc_program_actor]
> 0-rpc-service: RPC program not available (req 1238463 1)
> [2012-01-13 06:20:47.382497] W [rpcsvc.c:1066:rpcsvc_error_reply]
> (-->/usr/lib/libgfrpc.so.0(rpc_transport_notify+0x3d) [0x4a46c7cd]
> (-->/usr/lib/libgfrpc.so.0(rpcsvc_notify+0xb8) [0x4a46bcb8]
> (-->/usr/lib/libgfrpc.so.0(rpcsvc_handle_rpc_call+0xdf)
> [0x4a46b98f]))) 0-: sending a RPC error reply
> [2012-01-13 06:20:47.384206] D [socket.c:193:__socket_rwv]
> 0-tcp.server: EOF from peer 127.0.0.1:1021
> [2012-01-13 06:20:47.384247] W
> [socket.c:1494:__socket_proto_state_machine] 0-tcp.server: reading
> from socket failed. Error (Transport endpoint is not connected), peer
> (127.0.0.1:1021)
> [2012-01-13 06:20:47.384270] D [socket.c:1768:socket_event_handler]
> 0-transport: disconnecting now
> [2012-01-13 06:20:47.384338] I [server.c:438:server_rpc_notify]
> 0-server: disconnected connection from 127.0.0.1:1021
>
> The seems to be a few steps missing from the user/administration menu I think.
>
>
> 4Things
> Multimedia and Communication | Property | Entertainment
> Kwasi Owusu Gyasi - Agyei
>
> cell        (+27) (0) 76 466 4488
> website www.4things.co.za
> email     kwasi.gyasiagyei at 4things.co.za
> skype    kwasi.gyasiagyei
> role        Developer.Designer.Software Architect
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users