[Gluster-users] setting up a "server"

[Steven Jones]

Hi,

Debian is good, I run that at home anyway.....if this works out that would be my base OS choice.

regards

Steven Jones

Technical Specialist - Linux RHCE

Victoria University, Wellington, NZ

0064 4 463 6272

________________________________________
From: gluster-users-bounces at gluster.org [gluster-users-bounces at gluster.org] on behalf of Thomas Jackson [thomas at thomax.com.au]
Sent: Tuesday, 29 November 2011 10:17 a.m.
To: gluster-users at gluster.org
Subject: Re: [Gluster-users] setting up a "server"

Hi Steven,

Extract from our internal wiki (this is for Debian based machines, so you
would need to swap a few of the commands around for Red Hat):

On all machines in the cluster:
        Check that they have entries for each other in /etc/hosts

Execute on all machines in the cluster:
        dpkg -i <most_recent_stable_version>
        /etc/init.d/glusterd start

On ONE HOST ONLY (doesn't matter which), execute the following commands to
build a distribute/replicate volume:
        gluster peer probe <host name of other box - repeat this command for
each box in the cluster other than the one executing the commands>
        gluster volume create test-volume replica 2 transport tcp
host1-dns-name:/mnt/physical-storage host1-dns-name:/mnt/physical-storage
        gluster volume start test-volume

On the hosts that you want to mount the volume on:
        mkdir /mnt/gluster
        mount -t glusterfs localhost:/test-volume /mnt/gluster-volume/

Cheers,

Thomas

-----Original Message-----
From: gluster-users-bounces at gluster.org
[mailto:gluster-users-bounces at gluster.org] On Behalf Of Steven Jones
Sent: Tuesday, 29 November 2011 8:07 AM
To: gluster-users at gluster.org
Subject: [Gluster-users] setting up a "server"

Hi,

I have the install guide and the admin guide....nothing in either that I can
see from the contents pages tells me how to create the first "server" ( I
assume that is what I have to do?)

Is there another doc Im missing? or a good URL for a howto on a redhat based
machine?

Also from what I can see the "free" version is cli only?

and there is no virtual (vmware) appliance?


regards

Steven Jones

Technical Specialist - Linux RHCE

Victoria University, Wellington, NZ

0064 4 463 6272
_______________________________________________
Gluster-users mailing list
Gluster-users at gluster.org
http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
--
Message  protected by MailGuard: e-mail anti-virus, anti-spam and content
filtering.
http://www.mailguard.com.au


_______________________________________________
Gluster-users mailing list
Gluster-users at gluster.org
http://gluster.org/cgi-bin/mailman/listinfo/gluster-users