[Gluster-users] Glusterfs cluster recovery and healing setup.

pranithk at gluster.com pranithk at gluster.com
Tue Mar 8 16:01:48 UTC 2011


Why dont you give me a specific scenario, I will tell you what has to be done.

Pranith
----- Original Message -----
From: "James Burnash" <jburnash at knight.com>
To: "pranithk at gluster.com" <pranithk at gluster.com>, "Hareem Haque" <hareem.haque at gmail.com>
Cc: gluster-users at gluster.org
Sent: Tuesday, March 8, 2011 9:22:03 PM
Subject: RE: [Gluster-users] Glusterfs cluster recovery and healing setup.

Hi Pranith - correct me if I'm wrong, but if node1 suffered catastrophic failure and had to be completely rebuilt from scratch, then additional procedures would have to be completed - right?

James Burnash, Unix Engineering

-----Original Message-----
From: gluster-users-bounces at gluster.org [mailto:gluster-users-bounces at gluster.org] On Behalf Of pranithk at gluster.com
Sent: Tuesday, March 08, 2011 10:33 AM
To: Hareem Haque
Cc: gluster-users at gluster.org
Subject: Re: [Gluster-users] Glusterfs cluster recovery and healing setup.

hi Hareem,
     When the NODE1 comes back up it will automatically be part of cluster and the self-heal of the files will happen whenever they are accessed. If you want to sync the files manually, follow the instructions in http://europe.gluster.org/community/documentation/index.php/Gluster_3.1:_Triggering_Self-Heal_on_Replicate

Pranith.
----- Original Message -----
From: "Hareem Haque" <hareem.haque at gmail.com>
To: gluster-users at gluster.org
Sent: Tuesday, March 8, 2011 7:37:15 PM
Subject: [Gluster-users] Glusterfs cluster recovery and healing setup.

Can someone please kindly help in the following:

How best to deal with node failures and cluster repairs.


I have a problem. I setup 4 node distribute replicated cluster.

Node1-4

Node1: 192.168.1.100
Node2: 192.168.1.101
Node3: 192.168.1.102
Node4: 192.168.1.103

On Node1 is initiated the peer probe command and formed the storage pool
(Node1 being hypothetical master).

I mounted the glusterfs native client on a machine. Using Node1 is used to
mount the glusterfs onto the client machine.


Now say NODE1 fails and goes offline. How do i add it back to the cluster
and get the cluster back to its 4 node strength.

Do i need to do rebalance or something else.

Your help is greatly appreciated.


Best Regards
Hareem. Haque

_______________________________________________
Gluster-users mailing list
Gluster-users at gluster.org
http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
_______________________________________________
Gluster-users mailing list
Gluster-users at gluster.org
http://gluster.org/cgi-bin/mailman/listinfo/gluster-users


DISCLAIMER:
This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this in error, please immediately notify me and permanently delete the original and any copy of any e-mail and any printout thereof. E-mail transmission cannot be guaranteed to be secure or error-free. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission.
NOTICE REGARDING PRIVACY AND CONFIDENTIALITY Knight Capital Group may, at its discretion, monitor and review the content of all e-mail communications. http://www.knight.com



More information about the Gluster-users mailing list