[Gluster-users] Setup gluster 3.1.2 ok but probe fails

[Joe Landman]

On 01/18/2011 12:41 PM, Gerry Reno wrote:

> On secondary:
>
>      # tcpdump -i eth0 'port 24007'
>      tcpdump: verbose output suppressed, use -v or -vv for full protocol
>      decode
>      listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
>      ^C
>      0 packets captured
>      0 packets received by filter
>      0 packets dropped by kernel

This is the acid test.  If no packets are getting between the units on 
this port, then something is firewalling them.

>> and see if you can get anything when you telnet into that port?
> On secondary:
>
>      # telnet 10.XXX.58.95 24007
>      Trying 10.XXX.58.95...
>      Connected to 10.XXX.58.95.
>      Escape character is '^]'.

Can you telnet into the secondary on this port from the primary, and let 
us know what you see when you tcpdump that port on the secondary

If you get a connection, and see no packets, then something is badly 
broken in assumptions about network connectivity.

You shouldn't get a connected message if it didn't connect.  tcpdump 
won't lie (as long as the options are correct).

-- 
Joseph Landman, Ph.D
Founder and CEO
Scalable Informatics Inc.
email: landman at scalableinformatics.com
web  : http://scalableinformatics.com
        http://scalableinformatics.com/sicluster
phone: +1 734 786 8423 x121
fax  : +1 866 888 3112
cell : +1 734 612 4615