[Gluster-users] Error : gluster2.0.3rc1 with fuse2.8inkernel2.6.30 , help !!!!!
Harshavardhana
harsha at gluster.com
Mon Jul 6 09:59:28 UTC 2009
Yes problem is that you having a fuse 2.8.0 version on client 2 which is of
API incompatible with fuse 2.7.x version.
And also using fuse 2.8.0 version on an older kernel wouldn't help as the
low level kernel api are also incompatible. Like in your case on 2.6.16 on
client 2
Regards
--
Harshavardhana
Z Research Inc http://www.zresearch.com/
2009/7/6 eagleeyes <eagleeyes at 126.com>
> I use the gluster only on itself space ,not a share pool . ,how to solve
> it ?
>
> In your word ,if some different client use the same share pool space ,their
> fuse must the same version ?
>
> 2009-07-06
> ------------------------------
> eagleeyes
> ------------------------------
> *发件人：* Harshavardhana
> *发送时间：* 2009-07-06 17:34:58
> *收件人：* eagleeyes
> *抄送：* gluster-users
> *主题：* Re: Re: [Gluster-users] Error : gluster2.0.3rc1 with
> fuse2.8inkernel2.6.30 ,help !!!!!
> If you can see fuse version on client 2 is different than fuse version
> of client 1. Install the fuse -2.7.x release and recompile glusterfs on
> client 2 machine. It should work.
>
> Regards
> --
> Harshavardhana
> Z Research Inc http://www.zresearch.com/
>
>
> 2009/7/6 eagleeyes <eagleeyes at 126.com>
>
>> How could i remove one of fuse ?
>>
>>
>> client 1
>> 2.6.30
>> gfs1:~ # dmesg | grep -i fuse
>> fuse init (API version 7.11)
>>
>> gfs1:~ # grep -i FUSE_MINOR_VERSION /usr/local/include/fuse/fuse_common.h
>> #define FUSE_MINOR_VERSION 7
>>
>> #define FUSE_VERSION FUSE_MAKE_VERSION(FUSE_MAJOR_VERSION, FUSE_MINOR_VERSION)
>> # undef FUSE_MINOR_VERSION
>> # define FUSE_MINOR_VERSION 5
>> # define FUSE_MINOR_VERSION 4
>> # define FUSE_MINOR_VERSION 1
>> # define FUSE_MINOR_VERSION 1
>>
>>
>> client 2
>> 2.6.16.21-0.8-smp
>> linux-2ca1:~ # dmesg | grep -i fuse
>> fuse: module not supported by Novell, setting U taint flag.
>> fuse init (API version 7.6)
>>
>> linux-2ca1:~ # grep -i FUSE_MINOR_VERSION /usr/local/include/fuse/fuse_common.h
>> #define FUSE_MINOR_VERSION 8
>>
>> #define FUSE_VERSION FUSE_MAKE_VERSION(FUSE_MAJOR_VERSION, FUSE_MINOR_VERSION)
>> # undef FUSE_MINOR_VERSION
>> # define FUSE_MINOR_VERSION 5
>> # define FUSE_MINOR_VERSION 4
>> # define FUSE_MINOR_VERSION 1
>> # define FUSE_MINOR_VERSION 1
>>
>>
>>
>>
>>
>>
>> 2009-07-06
>> ------------------------------
>> eagleeyes
>> ------------------------------
>> *发件人：* Harshavardhana
>> *发送时间：* 2009-07-06 17:18:34
>> *收件人：* eagleeyes
>> *抄送：* Anand Avati; gluster-users
>> *主题：* Re: [Gluster-users] Error : gluster2.0.3rc1 with fuse2.8
>> inkernel2.6.30 ,help !!!!!
>> Eagleyes,
>>
>> I think you are using glusterfs with two different versions of fuse API
>> versions. API versions for 2.6.30 kernel are not compatible with 2.6.16-21
>> version. I would suggest you to use same fuse API versions for glusterfs.
>> Can i have a few details
>>
>> 1. dmesg | grep -i fuse (on each clients)
>> 2. grep -i FUSE_MINOR_VERSION /usr/include/fuse/fuse_common.h (on each
>> clients)
>>
>> Regards
>> --
>> Harshavardhana
>> Z Research Inc http://www.zresearch.com/
>>
>>
>> On Mon, Jul 6, 2009 at 12:31 PM, eagleeyes <eagleeyes at 126.com> wrote:
>>
>>> HI
>>>
>>> 1. I use gluster2.0.3rc2 with fuse init (API version 7.11) in SUSE
>>> sp10 ,kernel 2.6.30.
>>> There were some error log :
>>> pending frames:
>>> frame : type(1) op(WRITE)
>>> frame : type(1) op(READ)
>>> frame : type(1) op(READ)
>>> frame : type(1) op(READ)
>>> patchset: 65524f58b29f0b813549412ba6422711a505f5d8
>>> signal received: 11
>>> configuration details:argp 1
>>> backtrace 1
>>> dlfcn 1
>>> fdatasync 1
>>> libpthread 1
>>> llistxattr 1
>>> setfsid 1
>>> spinlock 1
>>> epoll.h 1
>>> xattr.h 1
>>> st_atim.tv_nsec 1
>>> package-string: glusterfs 2.0.3rc2
>>> [0xffffe400]
>>> /usr/local/lib/libfuse.so.2(fuse_session_process+0x26)[0xb752fb56]
>>> /lib/glusterfs/2.0.3rc2/xlator/mount/fuse.so[0xb755de25]
>>> /lib/libpthread.so.0[0xb7f0d2ab]
>>> /lib/libc.so.6(__clone+0x5e)[0xb7ea4a4e]
>>> ---------
>>> 2. Use glusterfs 2.0.3rc2 with fuse init (API version 7.6) in suse
>>> sp10, kernel 2.6.16.21-0.8-smp ,
>>> when i expanded dht volumes from four to six ,then i "rm *" in gluster
>>> directory , there were some error :
>>>
>>> [2009-07-06 22:56:23] W [fuse-bridge.c:921:fuse_unlink_cbk] glusterfs-fuse: 1636: RMDIR() /scheduler => -1 (No such file or directory)
>>>
>>> [2009-07-06 22:56:23] W [fuse-bridge.c:921:fuse_unlink_cbk] glusterfs-fuse: 1643: RMDIR() /transport => -1 (No such file or directory)
>>>
>>> [2009-07-06 22:56:23] W [fuse-bridge.c:921:fuse_unlink_cbk] glusterfs-fuse: 1655: RMDIR() /xlators/cluster => -1 (No such file or directory)
>>>
>>> [2009-07-06 22:56:23] W [fuse-bridge.c:921:fuse_unlink_cbk] glusterfs-fuse: 1666: RMDIR() /xlators/debug => -1 (No such file or directory)
>>> [2009-07-06 22:56:23] W [fuse-bridge.c:921:fuse_unlink_cbk] glusterfs-fuse: 1677: RMDIR() /xlators/mount => -1 (No such file or directory)
>>>
>>>
>>> and new files didn't write into the new volumes after expansion .
>>>
>>>
>>>
>>>
>>> 2009-07-06
>>> ------------------------------
>>> eagleeyes
>>> ------------------------------
>>> *发件人：* Anand Avati
>>> *发送时间：* 2009-07-06 12:09:13
>>> *收件人：* eagleeyes
>>> *抄送：* gluster-users
>>> *主题：* Re: [Gluster-users] Error : gluster2.0.3rc1 with fuse2.8 in
>>> kernel2.6.30 ,help !!!!!
>>> Please use 2.0.3 stable, or upgrade to the next rc2 until then. This
>>> has been fixed in rc2.
>>> Avati
>>> On Mon, Jul 6, 2009 at 8:31 AM, eagleeyes<eagleeyes at 126.com> wrote:
>>> > HI
>>> > I use gluster2.0.3rc1 with fuse 2.8 in kernel
>>>
>>> > 2.6.30(SUSE Linux Enterprise Server 10 SP1 with kernel 2.6.30 ) . the mount
>>> > message was :
>>> >
>>> > /dev/hda4 on /data type reiserfs (rw,user_xattr)
>>>
>>> > glusterfs-client.vol.dht on /home type fuse.glusterfs (rw,allow_other,default_permissions,max_read=131072)
>>> >
>>> >
>>> >
>>>
>>> > There was some error when i "touce 111" in gluster directory ,the error was
>>> > :
>>> > /home: Transport endpoint is not connected
>>> >
>>> > pending frames:
>>> > patchset: e0db4ff890b591a58332994e37ce6db2bf430213
>>> > signal received: 11
>>> > configuration details:argp 1
>>> > backtrace 1
>>> > dlfcn 1
>>> > fdatasync 1
>>> > libpthread 1
>>> > llistxattr 1
>>> > setfsid 1
>>> > spinlock 1
>>> > epoll.h 1
>>> > xattr.h 1
>>> > st_atim.tv_nsec 1
>>> > package-string: glusterfs 2.0.3rc1
>>> > [0xffffe400]
>>> > /lib/glusterfs/2.0.3rc1/xlator/mount/fuse.so[0xb75c6288]
>>>
>>> > /lib/glusterfs/2.0.3rc1/xlator/performance/write-behind.so(wb_create_cbk+0xa7)[0xb75ccad7]
>>>
>>> > /lib/glusterfs/2.0.3rc1/xlator/performance/io-cache.so(ioc_create_cbk+0xde)[0xb7fbe8ae]
>>>
>>> > /lib/glusterfs/2.0.3rc1/xlator/performance/read-ahead.so(ra_create_cbk+0x167)[0xb7fc78b7]
>>>
>>> > /lib/glusterfs/2.0.3rc1/xlator/cluster/dht.so(dht_create_cbk+0xf7)[0xb75e25b7]
>>>
>>> > /lib/glusterfs/2.0.3rc1/xlator/protocol/client.so(client_create_cbk+0x2ad)[0xb76004ad]
>>>
>>> > /lib/glusterfs/2.0.3rc1/xlator/protocol/client.so(protocol_client_interpret+0x1ef)[0xb75ef8ff]
>>>
>>> > /lib/glusterfs/2.0.3rc1/xlator/protocol/client.so(protocol_client_pollin+0xcf)[0xb75efaef]
>>>
>>> > /lib/glusterfs/2.0.3rc1/xlator/protocol/client.so(notify+0x1ec)[0xb75f6ddc]
>>>
>>> > /lib/glusterfs/2.0.3rc1/transport/socket.so(socket_event_poll_in+0x3b)[0xb75b775b]
>>>
>>> > /lib/glusterfs/2.0.3rc1/transport/socket.so(socket_event_handler+0xae)[0xb75b7b8e]
>>> > /lib/libglusterfs.so.0[0xb7facbda]
>>> > /lib/libglusterfs.so.0(event_dispatch+0x21)[0xb7fabac1]
>>> > glusterfs(main+0xc2e)[0x804b6ae]
>>> > /lib/libc.so.6(__libc_start_main+0xdc)[0xb7e6087c]
>>> > glusterfs[0x8049c11]
>>> > ---------
>>> >
>>> > the server configuration
>>> >
>>> > gfs1:/ # cat /etc/glusterfs/glusterfsd-sever.vol
>>> > volume posix1
>>> > type storage/posix # POSIX FS translator
>>> > option directory /data/data1 # Export this directory
>>> > end-volume
>>> > volume posix2
>>> > type storage/posix # POSIX FS translator
>>> > option directory /data/data2 # Export this directory
>>> > end-volume
>>> > volume posix3
>>> > type storage/posix # POSIX FS translator
>>> > option directory /data/data3 # Export this directory
>>> > end-volume
>>> > volume posix4
>>> > type storage/posix # POSIX FS translator
>>> > option directory /data/data4 # Export this directory
>>> > end-volume
>>> > volume posix5
>>> > type storage/posix # POSIX FS translator
>>> > option directory /data/data5 # Export this directory
>>> > end-volume
>>> > volume posix6
>>> > type storage/posix # POSIX FS translator
>>> > option directory /data/data6 # Export this directory
>>> > end-volume
>>> > volume posix7
>>> > type storage/posix # POSIX FS translator
>>> > option directory /data/data7 # Export this directory
>>> > end-volume
>>> > volume posix8
>>> > type storage/posix # POSIX FS translator
>>> > option directory /data/data8 # Export this directory
>>> > end-volume
>>> > volume brick1
>>> > type features/posix-locks
>>>
>>> > option mandatory-locks on # enables mandatory locking on all files
>>> > subvolumes posix1
>>> > end-volume
>>> > volume brick2
>>> > type features/posix-locks
>>>
>>> > option mandatory-locks on # enables mandatory locking on all files
>>> > subvolumes posix2
>>> > end-volume
>>> > volume brick3
>>> > type features/posix-locks
>>>
>>> > option mandatory-locks on # enables mandatory locking on all files
>>> > subvolumes posix3
>>> > end-volume
>>> > volume brick4
>>> > type features/posix-locks
>>>
>>> > option mandatory-locks on # enables mandatory locking on all files
>>> > subvolumes posix4
>>> > end-volume
>>> > volume brick5
>>> > type features/posix-locks
>>>
>>> > option mandatory-locks on # enables mandatory locking on all files
>>> > subvolumes posix5
>>> > end-volume
>>> > volume brick6
>>> > type features/posix-locks
>>>
>>> > option mandatory-locks on # enables mandatory locking on all files
>>> > subvolumes posix6
>>> > end-volume
>>> > volume brick7
>>> > type features/posix-locks
>>>
>>> > option mandatory-locks on # enables mandatory locking on all files
>>> > subvolumes posix7
>>> > end-volume
>>> > volume brick8
>>> > type features/posix-locks
>>>
>>> > option mandatory-locks on # enables mandatory locking on all files
>>> > subvolumes posix8
>>> > end-volume
>>> > ### Add network serving capability to above brick.
>>> > volume server
>>> > type protocol/server
>>> > option transport-type tcp
>>>
>>> > option transport.socket.bind-address 172.20.92.240 # Default is to listen on all interfaces
>>>
>>> > option transport.socket.listen-port 6996 # Default is 6996
>>> > subvolumes brick1 brick2 brick3 brick4
>>> > option auth.addr.brick1.allow * # Allow access to "brick" volume
>>> > option auth.addr.brick2.allow * # Allow access to "brick" volume
>>> > option auth.addr.brick3.allow * # Allow access to "brick" volume
>>> > option auth.addr.brick4.allow * # Allow access to "brick" volume
>>> > option auth.addr.brick5.allow * # Allow access to "brick" volume
>>> > option auth.addr.brick6.allow * # Allow access to "brick" volume
>>> > option auth.addr.brick7.allow * # Allow access to "brick" volume
>>> > option auth.addr.brick8.allow * # Allow access to "brick" volume
>>> > end-volume
>>> >
>>> > the client configuration:
>>> >
>>> > gfs1:/ # cat /etc/glusterfs/glusterfs-client.vol.dht
>>> > volume client1
>>> > type protocol/client
>>> > option transport-type tcp
>>>
>>> > option remote-host 172.20.92.240 # IP address of the remote brick2
>>> > option remote-port 6996
>>> > option remote-subvolume brick1 # name of the remote volume
>>> > end-volume
>>> > volume client2
>>> > type protocol/client
>>> > option transport-type tcp
>>>
>>> > option remote-host 172.20.92.240 # IP address of the remote brick2
>>> > option remote-port 6996
>>> > #option transport-timeout 10 # seconds to wait for a reply
>>> > option remote-subvolume brick2 # name of the remote volume
>>> > end-volume
>>> > volume client3
>>> > type protocol/client
>>> > option transport-type tcp
>>>
>>> > option remote-host 172.20.92.240 # IP address of the remote brick2
>>> > option remote-port 6996
>>> > #option transport-timeout 10 # seconds to wait for a reply
>>> > option remote-subvolume brick3 # name of the remote volume
>>> > end-volume
>>> > volume client4
>>> > type protocol/client
>>> > option transport-type tcp
>>>
>>> > option remote-host 172.20.92.240 # IP address of the remote brick2
>>> > option remote-port 6996
>>> > #option transport-timeout 10 # seconds to wait for a reply
>>> > option remote-subvolume brick4 # name of the remote volume
>>> > end-volume
>>> > volume client5
>>> > type protocol/client
>>> > option transport-type tcp
>>>
>>> > option remote-host 172.20.92.240 # IP address of the remote brick2
>>> > option remote-port 6996
>>> > #option transport-timeout 10 # seconds to wait for a reply
>>> > option remote-subvolume brick1 # name of the remote volume
>>> > end-volume
>>> > volume client6
>>> > type protocol/client
>>> > option transport-type tcp
>>>
>>> > option remote-host 172.20.92.240 # IP address of the remote brick2
>>> > option remote-port 6996
>>> > #option transport-timeout 10 # seconds to wait for a reply
>>> > option remote-subvolume brick2 # name of the remote volume
>>> > end-volume
>>> > volume client7
>>> > type protocol/client
>>> > option transport-type tcp
>>>
>>> > option remote-host 172.20.92.240 # IP address of the remote brick2
>>> > option remote-port 6996
>>> > #option transport-timeout 10 # seconds to wait for a reply
>>> > option remote-subvolume brick3 # name of the remote volume
>>> > end-volume
>>> > volume client8
>>> > type protocol/client
>>> > option transport-type tcp
>>>
>>> > option remote-host 172.20.92.240 # IP address of the remote brick2
>>> > option remote-port 6996
>>> > #option transport-timeout 10 # seconds to wait for a reply
>>> > option remote-subvolume brick4 # name of the remote volume
>>> > end-volume
>>> > #volume afr3
>>> > # type cluster/afr
>>> > # subvolumes client3 client6
>>> > #end-volume
>>> > volume dht
>>> > type cluster/dht
>>> > option lookup-unhashed yes
>>> > subvolumes client1 client2 client3 client4
>>> > end-volume
>>> >
>>> > Could you help me ?
>>> >
>>> >
>>> >
>>> > 2009-07-06
>>> > ________________________________
>>> > eagleeyes
>>> > ________________________________
>>> > 发件人： Sachidananda
>>> > 发送时间： 2009-07-04 11:39:03
>>> > 收件人： eagleeyes
>>> > 抄送： gluster-users
>>> > 主题： Re: [Gluster-users] HELP : Files lost after DHT expansion
>>> > Hi,
>>> > eagleeyes wrote:
>>>
>>> > > When i update to gluster2.0.3 ,after dht expansion ,double directorys
>>> > > appear in the gluster directory ，why ？
>>> > >
>>> > > client configure
>>> > > volume dht
>>> > > type cluster/dht
>>> > > option lookup-unhashed yes
>>> > > option min-free-disk 10%
>>>
>>> > > subvolumes client1 client2 client3 client4 client5 client6 client7
>>> > client8
>>> > > #subvolumes client1 client2 client3 client4
>>> > > end-volume
>>> > >
>>> > >
>>> > Can you please send us your server/client volume files?
>>> > --
>>> > Sachidananda.
>>> > _______________________________________________
>>> > Gluster-users mailing list
>>> > Gluster-users at gluster.org
>>> > http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
>>> >
>>> >
>>>
>>> _______________________________________________
>>> Gluster-users mailing list
>>> Gluster-users at gluster.org
>>> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20090706/536dbe50/attachment.html>
More information about the Gluster-users
mailing list