[Gluster-users] Fuse problem

[Hiren Joshi]

> -----Original Message-----
> From: Jason Williams [mailto:jasonw at jhu.edu] 
> Sent: 11 August 2009 15:42
> To: Hiren Joshi
> Cc: Vikas Gorur; gluster-users at gluster.org
> Subject: Re: [Gluster-users] Fuse problem
> 
> Hiren Joshi wrote:
> >  
> > 
> >> -----Original Message-----
> >> From: Vikas Gorur [mailto:vikas at gluster.com] 
> >> Sent: 11 August 2009 15:34
> >> To: Hiren Joshi
> >> Cc: gluster-users at gluster.org
> >> Subject: Re: [Gluster-users] Fuse problem
> >>
> >>
> >> ----- "Hiren Joshi" <josh at moonfruit.com> wrote:
> >>
> >>> Hello all,
> >>>  
> >>> I'm running a 64bit Centos5 setup and am trying to mount a gluster
> >>> filesystem (which is exported out of the same box).
> >>>  
> >>> glusterfs --debug --volfile=/root/gluster/webspace2.vol
> >>> /home/webspace_glust/
> >>>  
> >>> Gives me:
> >>> <snip>
> >>> [2009-08-11 16:26:37] D [client-protocol.c:5963:init] glust1b_36:
> >>> defaulting ping-timeout to 10
> >>> [2009-08-11 16:26:37] D [transport.c:141:transport_load] 
> transport:
> >>> attempt to load file 
> /usr/lib64/glusterfs/2.0.4/transport/socket.so
> >>> [2009-08-11 16:26:37] D [transport.c:141:transport_load] 
> transport:
> >>> attempt to load file 
> /usr/lib64/glusterfs/2.0.4/transport/socket.so
> >>> fuse: device not found, try 'modprobe fuse' first
> >> Make sure you have the fuse module loaded (modprobe fuse).
> >>
> > 
> > I have fuse.x86_64 2.7.4-1.el5.rf installed but:
> > #> modprobe fuse
> > FATAL: Module fuse not found.
> > 
> > 
> >> Vikas
> >> -- 
> >> Engineer - http://gluster.com/
> >>
> >>
> 
> That is the userland part of fuse.  There is also a kernel 
> module that 
> you will need to get and install.  I'm guessing you have yum 
> since this 
> appears to be a RHEL 5 machine so try a 'yum search fuse' to 
> see if you 
> can find the name of the kernel module.  It escapes me at the moment, 
> which is why I suggest the yum search.

yum install dkms-fuse did the trick...... thanks!


> 
> --
> Jason
>