[Gluster-users] NUFA sample volume file to the following configuration

[Basavanagowda Kanur]

Stas,
http://gluster.org/docs/index.php/NUFA_with_single_process will help you
setup NUFA.

--
gowda

On Sun, Dec 28, 2008 at 4:44 AM, Stas Oskin <stas.oskin at gmail.com> wrote:

> Hi.
>
> I'm looking to run GlusterFS in NUFA approach for 2 servers in following
> configuration:
>
> /dev/md2              4.8G  1.1G  3.5G  25% /
> /dev/sda5             357G  195M  339G   1% /disk1
> /dev/sdb5             357G  195M  339G   1% /disk2
> /dev/sdc3             357G  195M  339G   1% /disk3
> /dev/sdd3             357G  195M  339G   1% /disk4
> /dev/md0              190M   12M  169M   7% /boot
>
> Where the data would be located on sda/b/c/d disks.
>
> I studied the volume file syntax, but couldn't understand how to create a
> file to unify all these disks into one volume.
>
> If someone could post a sample file, which does a NUFA setup for 2 servers
> with such disks topology + AFR between them, so I could get started with it,
> I'd much appreciate it.
>
> Thanks in advance.
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
>
>


-- 
hard work often pays off after time, but laziness always pays off now
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20081228/213e76b9/attachment.html>