[Gluster-users] distributed glusterfs volume of four ramdisks problems

Sun Jul 11 20:58:55 UTC 2021

Yaniv:

I created a directory on a XFS formatted drive and that initially worked with tcp/inet.

I then went to stop, delete, and tried to recreate the gluster volume with the option "transport tcp,rdma", it failed.

I had to use the force options for gluster to work.

But then it failed when trying to mount the volume, but prior to this change, I was able to mount the glusterfs volume using tcp/inet only.

But now when I try to re-create the volume with "transport tcp,rdma", it fails.

When I try to recreate the volume without any arguments, it fails as well because it thinks that the mount point/folder/directory has already been associated with a previous gluster volume, which I don't know how to properly resolve and none of the official documentation on gluster.org explains how to deal with that.

Thank you.

Sincerely,
Ewen

________________________________
From: Yaniv Kaul <ykaul at redhat.com>
Sent: July 11, 2021 4:02 PM
To: Ewen Chan <alpha754293 at hotmail.com>
Subject: Re: [Gluster-users] distributed glusterfs volume of four ramdisks problems

Can you try on a non tmpfs file system?
Y.

On Sun, 11 Jul 2021, 22:59 Ewen Chan <alpha754293 at hotmail.com<mailto:alpha754293 at hotmail.com>> wrote:
Strahil:

I just tried to create an entirely new gluster volume, gv1, instead of trying to use gv0.

Same error.

# gluster volume create gv1 node{1..4}:/mnt/ramdisk/gv1
volume create: gv1: success: please start the volume to access data

When I tried to start the volume with:

# gluster volume start gv1

gluster responds with:

volume start: gv1: failed: Commit failed on localhost. Please check log file for details.

Attached are the updated glusterd.log and cli.log files.

I checked and without specifying the options or the transport parameters, it defaults to using tcp/inet, but that still failed, so I am not really sure what's going on here.

Thanks.

Sincerely,
Ewen

________________________________
From: Strahil Nikolov <hunter86_bg at yahoo.com<mailto:hunter86_bg at yahoo.com>>
Sent: July 11, 2021 2:49 AM
To: gluster-users at gluster.org<mailto:gluster-users at gluster.org> <gluster-users at gluster.org<mailto:gluster-users at gluster.org>>; Ewen Chan <alpha754293 at hotmail.com<mailto:alpha754293 at hotmail.com>>
Subject: Re: [Gluster-users] distributed glusterfs volume of four ramdisks problems

Does it crash with tcp ?
What happens when you mount on one of the hosts ?

Best Regards,
Strahil Nikolov

В събота, 10 юли 2021 г., 18:55:40 ч. Гринуич+3, Ewen Chan <alpha754293 at hotmail.com<mailto:alpha754293 at hotmail.com>> написа:

Hello everybody.

I have a cluster with four nodes and I am trying to create a distributed glusterfs volume consisting of four RAM drives, each being 115 GB in size.

I am running CentOS 7.7.1908.

I created the ramdrives on each of the four nodes with the following command:

# mount -t tmpfs -o size=115g tmpfs /mnt/ramdisk

I then create the mount point for the gluster volume on each of the nodes:

# mkdir -p /mnt/ramdisk/gv0

And then I tried to create the glusterfs distributed volume:

# gluster volume create gv0 transport tcp,rdma node{1..4}:/mnt/ramdisk/gv0

And that came back with:

volume create: gv0: success: pleas start the volume to access data

When I tried to start the volume with:

# gluster volume start gv0

gluster responds with:

volume start: gv0: failed: Commit failed on localhost. Please check log file for details.

So I tried forcing the start with:

# gluster volume start gv0 force

gluster responds with:

volume start: gv0: success

I then created the mount point for the gluster volume:

# mkdir -p /home/gluster

And tried to mount the gluster gv0 volume:

# mount -t glusterfs -o transport=rdma,direct-io-mode=enable node1:/gv0 /home/gluster

and the system crashes.

After rebooting the system and switching users back to root, I get this:

ABRT has detected 1 problem(s). For more info run: abrt-cli list --since 1625929899

# abrt-cli list --since 1625929899
id 2a8ae7a1207acc48a6fc4a6cd8c3c88ffcf431be

reason:         glusterfsd killed by SIGSEGV

time:           Sat 10 Jul 2021 10:56:13 AM EDT

cmdline:        /usr/sbin/glusterfsd -s aes1 --volfile-id gv0.aes1.mnt-ramdisk-gv0 -p /var/run/gluster/vols/gv0/aes1-mnt-ramdisk-g

v0.pid -S /var/run/gluster/5c2a19a097c93ac6.socket --brick-name /mnt/ramdisk/gv0 -l /var/log/glusterfs/bricks/mnt-ramdisk-gv0.log

--xlator-option *-posix.glusterd-uuid=0a569353-5991-4bc1-a61f-4ca6950f313d --process-name brick --brick-port 49152 49153 --xlator-

option gv0-server.transport.rdma.listen-port=49153 --xlator-option gv0-server.listen-port=49152 --volfile-server-transport=socket,

rdma

package:        glusterfs-fuse-9.3-1.el7

uid:            0 (root)

count:          4

Directory:      /var/spool/abrt/ccpp-2021-07-10-10:56:13-4935

The Autoreporting feature is disabled. Please consider enabling it by issuing
'abrt-auto-reporting enabled' as a user with root privileges

Where do I begin to even remotely try and fix this, and to get this up and running?

Any help in regards to this is greatly appreciated.

Thank you.

Sincerely,

Ewen

________

Community Meeting Calendar:

Schedule -
Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
Bridge: https://meet.google.com/cpu-eiue-hvk
Gluster-users mailing list
Gluster-users at gluster.org<mailto:Gluster-users at gluster.org>
https://lists.gluster.org/mailman/listinfo/gluster-users
________

Community Meeting Calendar:

Schedule -
Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
Bridge: https://meet.google.com/cpu-eiue-hvk
Gluster-users mailing list
Gluster-users at gluster.org<mailto:Gluster-users at gluster.org>
https://lists.gluster.org/mailman/listinfo/gluster-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20210711/29a33965/attachment.html>