[Gluster-users] GlusterFS over multiples HDD

Strahil Nikolov hunter86_bg at yahoo.com
Thu Jul 30 16:32:32 UTC 2020


When using legacy,  you need to  prepare the MBR on each disk, so the BIOS will be able to boot from it and load grub.

On UEFI, you will need 2 entries each pointing to the other disk. There  is a thread for each approach in the CentOS7 forums and the peocedure is almost the same on all linux .

Best Regards,
Strahil Nikolov

На 30 юли 2020 г. 18:17:49 GMT+03:00, Gilberto Nunes <gilberto.nunes32 at gmail.com> написа:
>I am using Legacy... But I am using Virtualbox in my labs... Perhaps
>this
>is the problem...
>I don't do that in real hardware. But with spare disk (2 + 1) in mdadm
>it's
>fine.
>
>---
>Gilberto Nunes Ferreira
>
>(47) 3025-5907
>(47) 99676-7530 - Whatsapp / Telegram
>
>Skype: gilberto.nunes36
>
>
>
>
>
>Em qui., 30 de jul. de 2020 às 12:16, Strahil Nikolov
><hunter86_bg at yahoo.com>
>escreveu:
>
>> The crash  with failed  mdadm disk is not normal. We need to check it
>out.
>>
>> Are  you using  Legacy or  UEFI  ?
>>
>> Best Regards,
>> Strahil Nikolov
>>
>> На 30 юли 2020 г. 16:25:47 GMT+03:00, Gilberto Nunes <
>> gilberto.nunes32 at gmail.com> написа:
>> >But I will give it a try in the lvm mirroring process.... Thanks
>> >---
>> >Gilberto Nunes Ferreira
>> >
>> >(47) 3025-5907
>> >(47) 99676-7530 - Whatsapp / Telegram
>> >
>> >Skype: gilberto.nunes36
>> >
>> >
>> >
>> >
>> >
>> >Em qui., 30 de jul. de 2020 às 10:23, Gilberto Nunes <
>> >gilberto.nunes32 at gmail.com> escreveu:
>> >
>> >> Well, actually I am not concerned ONLY about mirroring the data,
>but
>> >with
>> >> reliability on it.
>> >> Here during my lab tests I notice if I pull off a disk and then
>power
>> >on
>> >> the server, the LVM crashes...
>> >> On the other hand, with ZFS even in degraded state the system
>booted
>> >> normally.
>> >> The same happens with mdadm. That's the point.
>> >>
>> >> ---
>> >> Gilberto Nunes Ferreira
>> >>
>> >> (47) 3025-5907
>> >> (47) 99676-7530 - Whatsapp / Telegram
>> >>
>> >> Skype: gilberto.nunes36
>> >>
>> >>
>> >>
>> >>
>> >>
>> >> Em qui., 30 de jul. de 2020 às 10:18, Alvin Starr
><alvin at netvel.net>
>> >> escreveu:
>> >>
>> >>> LVM supports mirroring or raid1.
>> >>> So to create a raid1 you would do something like "lvcreate -n
>> >raidvol  -L
>> >>> 1T --mirrors 1  /dev/bigvg"
>> >>> You can add a mirror to an existing logical volume using
>lvconvert
>> >with
>> >>> something like "lvconvert --mirrors +1 bigvg/unmirroredlv"
>> >>>
>> >>> But other than simple mirroring you will need mdadm.
>> >>>
>> >>>
>> >>>
>> >>> On 7/30/20 8:39 AM, Gilberto Nunes wrote:
>> >>>
>> >>> Doing some research and the chvg command, which is responsable
>for
>> >create
>> >>> hotspare disks in LVM is available only in AIX!
>> >>> I have a Debian Buster box and there is no such command chvg.
>> >Correct me
>> >>> if I am wrong....
>> >>> ---
>> >>> Gilberto Nunes Ferreira
>> >>>
>> >>> (47) 3025-5907
>> >>> (47) 99676-7530 - Whatsapp / Telegram
>> >>>
>> >>> Skype: gilberto.nunes36
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>> Em qui., 30 de jul. de 2020 às 02:05, Strahil Nikolov <
>> >>> hunter86_bg at yahoo.com> escreveu:
>> >>>
>> >>>> LVM allows creating/converting striped/mirrored LVs without any
>> >dowtime
>> >>>> and it's using the md module.
>> >>>>
>> >>>> Best Regards,
>> >>>> Strahil Nikolov
>> >>>>
>> >>>> На 28 юли 2020 г. 22:43:39 GMT+03:00, Gilberto Nunes <
>> >>>> gilberto.nunes32 at gmail.com> написа:
>> >>>> >Hi there....
>> >>>> >
>> >>>> >'till now, I am using glusterfs over XFS and so far so good.
>> >>>> >Using LVM too....
>> >>>> >Unfortunately, there is no way with XFS to merge two or more
>HDD,
>> >in
>> >>>> >order
>> >>>> >to use more than one HDD, like RAID1 or RAID5.
>> >>>> >My primary goal is to use two server with GlusterFS on top of
>> >multiples
>> >>>> >HDDs for qemu images.
>> >>>> >I have think about BTRFS or mdadm.
>> >>>> >Anybody has some experience on this?
>> >>>> >
>> >>>> >Thanks a lot
>> >>>> >
>> >>>> >---
>> >>>> >Gilberto Nunes Ferreira
>> >>>>
>> >>>
>> >>> ________
>> >>>
>> >>>
>> >>>
>> >>> Community Meeting Calendar:
>> >>>
>> >>> Schedule -
>> >>> Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
>> >>> Bridge: https://bluejeans.com/441850968
>> >>>
>> >>> Gluster-users mailing
>> >listGluster-users at gluster.orghttps://
>> lists.gluster.org/mailman/listinfo/gluster-users
>> >>>
>> >>>
>> >>> --
>> >>> Alvin Starr                   ||   land:  (647)478-6285
>> >>> Netvel Inc.                   ||   Cell:
>> >(416)806-0133alvin at netvel.net              ||
>> >>>
>> >>>
>> >>> ________
>> >>>
>> >>>
>> >>>
>> >>> Community Meeting Calendar:
>> >>>
>> >>> Schedule -
>> >>> Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
>> >>> Bridge: https://bluejeans.com/441850968
>> >>>
>> >>> Gluster-users mailing list
>> >>> Gluster-users at gluster.org
>> >>> https://lists.gluster.org/mailman/listinfo/gluster-users
>> >>>
>> >>
>>


More information about the Gluster-users mailing list