[Gluster-users] Gluster and bonding

[Dmitry Melekhov]

23.02.2019 19:54, Alex K пишет:
> Hi all,
>
> I have a replica 3 setup where each server was configured with a dual 
> interfaces in mode 6 bonding. All cables were connected to one common 
> network switch.
>
> To add redundancy to the switch, and avoid being a single point of 
> failure, I connected each second cable of each server to a second 
> switch. This turned out to not function as gluster was refusing to 
> start the volume logging "transport endpoint is disconnected" although 
> all nodes were able to reach each other (ping) in the storage network. 
> I switched the mode to mode 1 (active/passive) and initially it worked 
> but following a reboot of all cluster same issue appeared. Gluster is 
> not starting the volumes.
>
> Isn't active/passive supposed to work like that? Can one have such 
> redundant network setup or are there any other recommended approaches?
>

Yes, we use lacp, I guess this is mode 4 ( we use teamd ), it is, no 
doubt, best way.


> Thanx,
> Alex
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> https://lists.gluster.org/mailman/listinfo/gluster-users


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20190225/0fc4ed74/attachment.html>