[Gluster-users] Extremely slow cluster performance
Patrick Rennie
patrickmrennie at gmail.com
Sun Apr 21 07:55:21 UTC 2019
Just another small update, I'm continuing to watch my brick logs and I just
saw these errors come up in the recent events too. I am going to continue
to post any errors I see in the hope of finding the right one to try and
fix..
This is from the logs on brick1, seems to be occurring on both nodes on
brick1, although at different times. I'm not sure what this means, can
anyone shed any light?
I guess I am looking for some kind of specific error which may indicate
something is broken or stuck and locking up and causing the extreme latency
I'm seeing in the cluster.
[2019-04-21 07:25:55.064497] E [rpcsvc.c:1364:rpcsvc_submit_generic]
0-rpc-service: failed to submit message (XID: 0x7c700c, Program: GlusterFS
3.3, ProgVers: 330, Proc: 29) to rpc-transport (tcp.gvAA01-server)
[2019-04-21 07:25:55.064612] E [server.c:195:server_submit_reply]
(-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/debug/io-stats.so(+0x1e58a)
[0x7f3b3e93158a]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x17d45)
[0x7f3b3e4c5d45]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x92cd)
[0x7f3b3e4b72cd] ) 0-: Reply submission failed
[2019-04-21 07:25:55.064675] E [rpcsvc.c:1364:rpcsvc_submit_generic]
0-rpc-service: failed to submit message (XID: 0x7c70af, Program: GlusterFS
3.3, ProgVers: 330, Proc: 30) to rpc-transport (tcp.gvAA01-server)
[2019-04-21 07:25:55.064705] E [server.c:195:server_submit_reply]
(-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/debug/io-stats.so(+0x1e8fa)
[0x7f3b3e9318fa]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x17f35)
[0x7f3b3e4c5f35]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x92cd)
[0x7f3b3e4b72cd] ) 0-: Reply submission failed
[2019-04-21 07:25:55.064742] E [rpcsvc.c:1364:rpcsvc_submit_generic]
0-rpc-service: failed to submit message (XID: 0x7c723c, Program: GlusterFS
3.3, ProgVers: 330, Proc: 30) to rpc-transport (tcp.gvAA01-server)
[2019-04-21 07:25:55.064768] E [server.c:195:server_submit_reply]
(-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/debug/io-stats.so(+0x1e8fa)
[0x7f3b3e9318fa]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x17f35)
[0x7f3b3e4c5f35]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x92cd)
[0x7f3b3e4b72cd] ) 0-: Reply submission failed
[2019-04-21 07:25:55.064812] E [rpcsvc.c:1364:rpcsvc_submit_generic]
0-rpc-service: failed to submit message (XID: 0x7c72b4, Program: GlusterFS
3.3, ProgVers: 330, Proc: 30) to rpc-transport (tcp.gvAA01-server)
[2019-04-21 07:25:55.064837] E [server.c:195:server_submit_reply]
(-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/debug/io-stats.so(+0x1e8fa)
[0x7f3b3e9318fa]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x17f35)
[0x7f3b3e4c5f35]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x92cd)
[0x7f3b3e4b72cd] ) 0-: Reply submission failed
[2019-04-21 07:25:55.064880] E [rpcsvc.c:1364:rpcsvc_submit_generic]
0-rpc-service: failed to submit message (XID: 0x7c740b, Program: GlusterFS
3.3, ProgVers: 330, Proc: 30) to rpc-transport (tcp.gvAA01-server)
[2019-04-21 07:25:55.064905] E [server.c:195:server_submit_reply]
(-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/debug/io-stats.so(+0x1e8fa)
[0x7f3b3e9318fa]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x17f35)
[0x7f3b3e4c5f35]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x92cd)
[0x7f3b3e4b72cd] ) 0-: Reply submission failed
[2019-04-21 07:25:55.064939] E [rpcsvc.c:1364:rpcsvc_submit_generic]
0-rpc-service: failed to submit message (XID: 0x7c7441, Program: GlusterFS
3.3, ProgVers: 330, Proc: 30) to rpc-transport (tcp.gvAA01-server)
[2019-04-21 07:25:55.064962] E [server.c:195:server_submit_reply]
(-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/debug/io-stats.so(+0x1e8fa)
[0x7f3b3e9318fa]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x17f35)
[0x7f3b3e4c5f35]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x92cd)
[0x7f3b3e4b72cd] ) 0-: Reply submission failed
[2019-04-21 07:25:55.064996] E [rpcsvc.c:1364:rpcsvc_submit_generic]
0-rpc-service: failed to submit message (XID: 0x7c74d5, Program: GlusterFS
3.3, ProgVers: 330, Proc: 30) to rpc-transport (tcp.gvAA01-server)
[2019-04-21 07:25:55.065020] E [server.c:195:server_submit_reply]
(-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/debug/io-stats.so(+0x1e8fa)
[0x7f3b3e9318fa]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x17f35)
[0x7f3b3e4c5f35]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x92cd)
[0x7f3b3e4b72cd] ) 0-: Reply submission failed
[2019-04-21 07:25:55.065052] E [rpcsvc.c:1364:rpcsvc_submit_generic]
0-rpc-service: failed to submit message (XID: 0x7c7551, Program: GlusterFS
3.3, ProgVers: 330, Proc: 30) to rpc-transport (tcp.gvAA01-server)
[2019-04-21 07:25:55.065076] E [server.c:195:server_submit_reply]
(-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/debug/io-stats.so(+0x1e8fa)
[0x7f3b3e9318fa]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x17f35)
[0x7f3b3e4c5f35]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x92cd)
[0x7f3b3e4b72cd] ) 0-: Reply submission failed
[2019-04-21 07:25:55.065110] E [rpcsvc.c:1364:rpcsvc_submit_generic]
0-rpc-service: failed to submit message (XID: 0x7c76d1, Program: GlusterFS
3.3, ProgVers: 330, Proc: 30) to rpc-transport (tcp.gvAA01-server)
[2019-04-21 07:25:55.065133] E [server.c:195:server_submit_reply]
(-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/debug/io-stats.so(+0x1e8fa)
[0x7f3b3e9318fa]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x17f35)
[0x7f3b3e4c5f35]
-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.15/xlator/protocol/server.so(+0x92cd)
[0x7f3b3e4b72cd] ) 0-: Reply submission failed
Thanks again,
-Patrick
On Sun, Apr 21, 2019 at 3:50 PM Patrick Rennie <patrickmrennie at gmail.com>
wrote:
> Hi Darrell,
>
> Thanks again for your advice, I've left it for a while but unfortunately
> it's still just as slow and causing more problems for our operations now. I
> will need to try and take some steps to at least bring performance back to
> normal while continuing to investigate the issue longer term. I can
> definitely see one node with heavier CPU than the other, almost double,
> which I am OK with, but I think the heal process is going to take forever,
> trying to check the "gluster volume heal info" shows thousands and
> thousands of files which may need healing, I have no idea how many in total
> the command is still running after hours, so I am not sure what has gone so
> wrong to cause this.
>
> I've checked cluster.op-version and cluster.max-op-version and it looks
> like I'm on the latest version there.
>
> I have no idea how long the healing is going to take on this cluster, we
> have around 560TB of data on here, but I don't think I can wait that long
> to try and restore performance to normal.
>
> Can anyone think of anything else I can try in the meantime to work out
> what's causing the extreme latency?
>
> I've been going through cluster client the logs of some of our VMs and on
> some of our FTP servers I found this in the cluster mount log, but I am not
> seeing it on any of our other servers, just our FTP servers.
>
> [2019-04-21 07:16:19.925388] E [MSGID: 101046]
> [dht-common.c:1904:dht_revalidate_cbk] 0-gvAA01-dht: dict is null
> [2019-04-21 07:19:43.413834] W [MSGID: 114031]
> [client-rpc-fops.c:2203:client3_3_setattr_cbk] 0-gvAA01-client-19: remote
> operation failed [No such file or directory]
> [2019-04-21 07:19:43.414153] W [MSGID: 114031]
> [client-rpc-fops.c:2203:client3_3_setattr_cbk] 0-gvAA01-client-20: remote
> operation failed [No such file or directory]
> [2019-04-21 07:23:33.154717] E [MSGID: 101046]
> [dht-common.c:1904:dht_revalidate_cbk] 0-gvAA01-dht: dict is null
> [2019-04-21 07:33:24.943913] E [MSGID: 101046]
> [dht-common.c:1904:dht_revalidate_cbk] 0-gvAA01-dht: dict is null
>
> Any ideas what this could mean? I am basically just grasping at straws
> here.
>
> I am going to hold off on the version upgrade until I know there are no
> files which need healing, which could be a while, from some reading I've
> done there shouldn't be any issues with this as both are on v3.12.x
>
> I've free'd up a small amount of space, but I still need to work on this
> further.
>
> I've read of a command "find .glusterfs -type f -links -2 -exec rm {} \;"
> which could be run on each brick and it would potentially clean up any
> files which were deleted straight from the bricks, but not via the client,
> I have a feeling this could help me free up about 5-10TB per brick from
> what I've been told about the history of this cluster. Can anyone confirm
> if this is actually safe to run?
>
> At this stage, I'm open to any suggestions as to how to proceed, thanks
> again for any advice.
>
> Cheers,
>
> - Patrick
>
> On Sun, Apr 21, 2019 at 1:22 AM Darrell Budic <budic at onholyground.com>
> wrote:
>
>> Patrick,
>>
>> Sounds like progress. Be aware that gluster is expected to max out the
>> CPUs on at least one of your servers while healing. This is normal and
>> won’t adversely affect overall performance (any more than having bricks in
>> need of healing, at any rate) unless you’re overdoing it. shd threads <= 4
>> should not do that on your hardware. Other tunings may have also increased
>> overall performance, so you may see higher CPU than previously anyway. I’d
>> recommend upping those thread counts and letting it heal as fast as
>> possible, especially if these are dedicated Gluster storage servers (Ie:
>> not also running VMs, etc). You should see “normal” CPU use one heals are
>> completed. I see ~15-30% overall normally, 95-98% while healing (x my 20
>> cores). It’s also likely to be different between your servers, in a pure
>> replica, one tends to max and one tends to be a little higher, in a
>> distributed-replica, I’d expect more than one to run harder while healing.
>>
>> Keep the differences between doing an ls on a brick and doing an ls on a
>> gluster mount in mind. When you do a ls on a gluster volume, it isn’t just
>> doing a ls on one brick, it’s effectively doing it on ALL of your bricks,
>> and they all have to return data before the ls succeeds. In a distributed
>> volume, it’s figuring out where on each volume things live and getting the
>> stat() from each to assemble the whole thing. And if things are in need of
>> healing, it will take even longer to decide which version is current and
>> use it (shd triggers a heal anytime it encounters this). Any of these
>> things being slow slows down the overall response.
>>
>> At this point, I’d get some sleep too, and let your cluster heal while
>> you do. I’d really want it fully healed before I did any updates anyway, so
>> let it use CPU and get itself sorted out. Expect it to do a round of
>> healing after you upgrade each machine too, this is normal so don’t let the
>> CPU spike surprise you, It’s just catching up from the downtime incurred by
>> the update and/or reboot if you did one.
>>
>> That reminds me, check your gluster cluster.op-version and
>> cluster.max-op-version (gluster vol get all all | grep op-version). If
>> op-version isn’t at the max-op-verison, set it to it so you’re taking
>> advantage of the latest features available to your version.
>>
>> -Darrell
>>
>> On Apr 20, 2019, at 11:54 AM, Patrick Rennie <patrickmrennie at gmail.com>
>> wrote:
>>
>> Hi Darrell,
>>
>> Thanks again for your advice, I've applied the acltype=posixacl on my
>> zpools and I think that has reduced some of the noise from my brick logs.
>> I also bumped up some of the thread counts you suggested but my CPU load
>> skyrocketed, so I dropped it back down to something slightly lower, but
>> still higher than it was before, and will see how that goes for a while.
>>
>> Although low space is a definite issue, if I run an ls anywhere on my
>> bricks directly it's instant, <1 second, and still takes several minutes
>> via gluster, so there is still a problem in my gluster configuration
>> somewhere. We don't have any snapshots, but I am trying to work out if any
>> data on there is safe to delete, or if there is any way I can safely find
>> and delete data which has been removed directly from the bricks in the
>> past. I also have lz4 compression already enabled on each zpool which does
>> help a bit, we get between 1.05 and 1.08x compression on this data.
>> I've tried to go through each client and checked it's cluster mount logs
>> and also my brick logs and looking for errors, so far nothing is jumping
>> out at me, but there are some warnings and errors here and there, I am
>> trying to work out what they mean.
>>
>> It's already 1 am here and unfortunately, I'm still awake working on this
>> issue, but I think that I will have to leave the version upgrades until
>> tomorrow.
>>
>> Thanks again for your advice so far. If anyone has any ideas on where I
>> can look for errors other than brick logs or the cluster mount logs to help
>> resolve this issue, it would be much appreciated.
>>
>> Cheers,
>>
>> - Patrick
>>
>> On Sat, Apr 20, 2019 at 11:57 PM Darrell Budic <budic at onholyground.com>
>> wrote:
>>
>>> See inline:
>>>
>>> On Apr 20, 2019, at 10:09 AM, Patrick Rennie <patrickmrennie at gmail.com>
>>> wrote:
>>>
>>> Hi Darrell,
>>>
>>> Thanks for your reply, this issue seems to be getting worse over the
>>> last few days, really has me tearing my hair out. I will do as you have
>>> suggested and get started on upgrading from 3.12.14 to 3.12.15.
>>> I've checked the zfs properties and all bricks have "xattr=sa" set, but
>>> none of them has "acltype=posixacl" set, currently the acltype property
>>> shows "off", if I make these changes will it apply retroactively to the
>>> existing data? I'm unfamiliar with what this will change so I may need to
>>> look into that before I proceed.
>>>
>>>
>>> It is safe to apply that now, any new set/get calls will then use it if
>>> new posixacls exist, and use older if not. ZFS is good that way. It should
>>> clear up your posix_acl and posix errors over time.
>>>
>>> I understand performance is going to slow down as the bricks get full, I
>>> am currently trying to free space and migrate data to some newer storage, I
>>> have fresh several hundred TB storage I just setup recently but with these
>>> performance issues it's really slow. I also believe there is significant
>>> data which has been deleted directly from the bricks in the past, so if I
>>> can reclaim this space in a safe manner then I will have at least around
>>> 10-15% free space.
>>>
>>>
>>> Full ZFS volumes will have a much larger impact on performance than
>>> you’d think, I’d prioritize this. If you have been taking zfs snapshots,
>>> consider deleting them to get the overall volume free space back up. And
>>> just to be sure it’s been said, delete from within the mounted volumes,
>>> don’t delete directly from the bricks (gluster will just try and heal it
>>> later, compounding your issues). Does not apply to deleting other data from
>>> the ZFS volume if it’s not part of the brick directory, of course.
>>>
>>> These servers have dual 8 core Xeon (E5-2620v4) and 512GB of RAM so
>>> generally they have plenty of resources available, currently only using
>>> around 330/512GB of memory.
>>>
>>> I will look into what your suggested settings will change, and then will
>>> probably go ahead with your recommendations, for our specs as stated above,
>>> what would you suggest for performance.io-thread-count ?
>>>
>>>
>>> I run single 2630v4s on my servers, which have a smaller storage
>>> footprint than yours. I’d go with 32 for performance.io-thread-count.
>>> I’d try 4 for the shd thread settings on that gear. Your memory use sounds
>>> fine, so no worries there.
>>>
>>> Our workload is nothing too extreme, we have a few VMs which write
>>> backup data to this storage nightly for our clients, our VMs don't live on
>>> this cluster, but just write to it.
>>>
>>>
>>> If they are writing compressible data, you’ll get immediate benefit by
>>> setting compression=lz4 on your ZFS volumes. It won’t help any old data, of
>>> course, but it will compress new data going forward. This is another one
>>> that’s safe to enable on the fly.
>>>
>>> I've been going through all of the logs I can, below are some slightly
>>> sanitized errors I've come across, but I'm not sure what to make of them.
>>> The main error I am seeing is the first one below, across several of my
>>> bricks, but possibly only for specific folders on the cluster, I'm not 100%
>>> about that yet though.
>>>
>>> [2019-04-20 05:56:59.512649] E [MSGID: 113001]
>>> [posix.c:4940:posix_getxattr] 0-gvAA01-posix: getxattr failed on
>>> /brick7/xxxxxxxxxxxxxxxxxxxx: system.posix_acl_default [Operation not
>>> supported]
>>> [2019-04-20 05:59:06.084333] E [MSGID: 113001]
>>> [posix.c:4940:posix_getxattr] 0-gvAA01-posix: getxattr failed on
>>> /brick7/xxxxxxxxxxxxxxxxxxxx: system.posix_acl_default [Operation not
>>> supported]
>>> [2019-04-20 05:59:43.289030] E [MSGID: 113001]
>>> [posix.c:4940:posix_getxattr] 0-gvAA01-posix: getxattr failed on
>>> /brick7/xxxxxxxxxxxxxxxxxxxx: system.posix_acl_default [Operation not
>>> supported]
>>> [2019-04-20 05:59:50.582257] E [MSGID: 113001]
>>> [posix.c:4940:posix_getxattr] 0-gvAA01-posix: getxattr failed on
>>> /brick7/xxxxxxxxxxxxxxxxxxxx: system.posix_acl_default [Operation not
>>> supported]
>>> [2019-04-20 06:01:42.501701] E [MSGID: 113001]
>>> [posix.c:4940:posix_getxattr] 0-gvAA01-posix: getxattr failed on
>>> /brick7/xxxxxxxxxxxxxxxxxxxx: system.posix_acl_default [Operation not
>>> supported]
>>> [2019-04-20 06:01:51.665354] W [posix.c:4929:posix_getxattr]
>>> 0-gvAA01-posix: Extended attributes not supported (try remounting brick
>>> with 'user_xattr' flag)
>>>
>>>
>>> [2019-04-20 13:12:36.131856] E [MSGID: 113002]
>>> [posix-helpers.c:893:posix_gfid_set] 0-gvAA01-posix: gfid is null for
>>> /xxxxxxxxxxxxxxxxxxxx [Invalid argument]
>>> [2019-04-20 13:12:36.131959] E [MSGID: 113002]
>>> [posix.c:362:posix_lookup] 0-gvAA01-posix: buf->ia_gfid is null for
>>> /brick2/xxxxxxxxxxxxxxxxxxxx_62906_tmp [No data available]
>>> [2019-04-20 13:12:36.132016] E [MSGID: 115050]
>>> [server-rpc-fops.c:175:server_lookup_cbk] 0-gvAA01-server: 24274759: LOOKUP
>>> /xxxxxxxxxxxxxxxxxxxx (a7c9b4a0-b7ee-4d01-a79e-576013c8ac87/Cloud
>>> Backup_clone1.vbm_62906_tmp), client:
>>> 00-A-16217-2019/04/08-21:23:03:692424-gvAA01-client-4-0-3, error-xlator:
>>> gvAA01-posix [No data available]
>>> [2019-04-20 13:12:38.093719] E [MSGID: 115050]
>>> [server-rpc-fops.c:175:server_lookup_cbk] 0-gvAA01-server: 24276491: LOOKUP
>>> /xxxxxxxxxxxxxxxxxxxx (a7c9b4a0-b7ee-4d01-a79e-576013c8ac87/Cloud
>>> Backup_clone1.vbm_62906_tmp), client:
>>> 00-A-16217-2019/04/08-21:23:03:692424-gvAA01-client-4-0-3, error-xlator:
>>> gvAA01-posix [No data available]
>>> [2019-04-20 13:12:38.093660] E [MSGID: 113002]
>>> [posix-helpers.c:893:posix_gfid_set] 0-gvAA01-posix: gfid is null for
>>> /xxxxxxxxxxxxxxxxxxxx [Invalid argument]
>>> [2019-04-20 13:12:38.093696] E [MSGID: 113002]
>>> [posix.c:362:posix_lookup] 0-gvAA01-posix: buf->ia_gfid is null for
>>> /brick2/xxxxxxxxxxxxxxxxxxxx [No data available]
>>>
>>>
>>> posixacls should clear those up, as mentioned.
>>>
>>>
>>> [2019-04-20 14:25:59.654576] E [inodelk.c:404:__inode_unlock_lock]
>>> 0-gvAA01-locks: Matching lock not found for unlock 0-9223372036854775807,
>>> by 980fdbbd367f0000 on 0x7fc4f0161440
>>> [2019-04-20 14:25:59.654668] E [MSGID: 115053]
>>> [server-rpc-fops.c:295:server_inodelk_cbk] 0-gvAA01-server: 6092928:
>>> INODELK /xxxxxxxxxxxxxxxxxxxx.cdr$ (25b14631-a179-4274-8243-6e272d4f2ad8),
>>> client:
>>> cb-per-worker18-53637-2019/04/19-14:25:37:927673-gvAA01-client-1-0-4,
>>> error-xlator: gvAA01-locks [Invalid argument]
>>>
>>>
>>> [2019-04-20 13:35:07.495495] E [rpcsvc.c:1364:rpcsvc_submit_generic]
>>> 0-rpc-service: failed to submit message (XID: 0x247c644, Program: GlusterFS
>>> 3.3, ProgVers: 330, Proc: 27) to rpc-transport (tcp.gvAA01-server)
>>> [2019-04-20 13:35:07.495619] E [server.c:195:server_submit_reply]
>>> (-->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.14/xlator/debug/io-stats.so(+0x1696a)
>>> [0x7ff4ae6f796a]
>>> -->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.14/xlator/protocol/server.so(+0x2d6e8)
>>> [0x7ff4ae2a96e8]
>>> -->/usr/lib/x86_64-linux-gnu/glusterfs/3.12.14/xlator/protocol/server.so(+0x928d)
>>> [0x7ff4ae28528d] ) 0-: Reply submission failed
>>>
>>>
>>> Fix the posix acls and see if these clear up over time as well, I’m
>>> unclear on what the overall effect of running without the posix acls will
>>> be to total gluster health. Your biggest problem sounds like you need to
>>> free up space on the volumes and get the overall volume health back up to
>>> par and see if that doesn’t resolve the symptoms you’re seeing.
>>>
>>>
>>>
>>> Thank you again for your assistance. It is greatly appreciated.
>>>
>>> - Patrick
>>>
>>>
>>>
>>> On Sat, Apr 20, 2019 at 10:50 PM Darrell Budic <budic at onholyground.com>
>>> wrote:
>>>
>>>> Patrick,
>>>>
>>>> I would definitely upgrade your two nodes from 3.12.14 to 3.12.15. You
>>>> also mention ZFS, and that error you show makes me think you need to check
>>>> to be sure you have “xattr=sa” and “acltype=posixacl” set on your ZFS
>>>> volumes.
>>>>
>>>> You also observed your bricks are crossing the 95% full line, ZFS
>>>> performance will degrade significantly the closer you get to full. In my
>>>> experience, this starts somewhere between 10% and 5% free space remaining,
>>>> so you’re in that realm.
>>>>
>>>> How’s your free memory on the servers doing? Do you have your zfs arc
>>>> cache limited to something less than all the RAM? It shares pretty well,
>>>> but I’ve encountered situations where other things won’t try and take ram
>>>> back properly if they think it’s in use, so ZFS never gets the opportunity
>>>> to give it up.
>>>>
>>>> Since your volume is a disperse-replica, you might try tuning
>>>> disperse.shd-max-threads, default is 1, I’d try it at 2, 4, or even more if
>>>> the CPUs are beefy enough. And setting server.event-threads to 4 and
>>>> client.event-threads to 8 has proven helpful in many cases. After you get
>>>> upgraded to 3.12.15, enabling performance.stat-prefetch may help as well. I
>>>> don’t know if it matters, but I’d also recommend resetting
>>>> performance.least-prio-threads to the default of 1 (or try 2 or 4) and/or
>>>> also setting performance.io-thread-count to 32 if those have beefy
>>>> CPUs.
>>>>
>>>> Beyond those general ideas, more info about your hardware (CPU and RAM)
>>>> and workload (VMs, direct storage for web servers or enders, etc) may net
>>>> you some more ideas. Then you’re going to have to do more digging into
>>>> brick logs looking for errors and/or warnings to see what’s going on.
>>>>
>>>> -Darrell
>>>>
>>>>
>>>> On Apr 20, 2019, at 8:22 AM, Patrick Rennie <patrickmrennie at gmail.com>
>>>> wrote:
>>>>
>>>> Hello Gluster Users,
>>>>
>>>> I am hoping someone can help me with resolving an ongoing issue I've
>>>> been having, I'm new to mailing lists so forgive me if I have gotten
>>>> anything wrong. We have noticed our performance deteriorating over the last
>>>> few weeks, easily measured by trying to do an ls on one of our top-level
>>>> folders, and timing it, which usually would take 2-5 seconds, and now takes
>>>> up to 20 minutes, which obviously renders our cluster basically unusable.
>>>> This has been intermittent in the past but is now almost constant and I am
>>>> not sure how to work out the exact cause. We have noticed some errors in
>>>> the brick logs, and have noticed that if we kill the right brick process,
>>>> performance instantly returns back to normal, this is not always the same
>>>> brick, but it indicates to me something in the brick processes or
>>>> background tasks may be causing extreme latency. Due to this ability to fix
>>>> it by killing the right brick process off, I think it's a specific file, or
>>>> folder, or operation which may be hanging and causing the increased
>>>> latency, but I am not sure how to work it out. One last thing to add is
>>>> that our bricks are getting quite full (~95% full), we are trying to
>>>> migrate data off to new storage but that is going slowly, not helped by
>>>> this issue. I am currently trying to run a full heal as there appear to be
>>>> many files needing healing, and I have all brick processes running so they
>>>> have an opportunity to heal, but this means performance is very poor. It
>>>> currently takes over 15-20 minutes to do an ls of one of our top-level
>>>> folders, which just contains 60-80 other folders, this should take 2-5
>>>> seconds. This is all being checked by FUSE mount locally on the storage
>>>> node itself, but it is the same for other clients and VMs accessing the
>>>> cluster. Initially, it seemed our NFS mounts were not affected and operated
>>>> at normal speed, but testing over the last day has shown that our NFS
>>>> clients are also extremely slow, so it doesn't seem specific to FUSE as I
>>>> first thought it might be.
>>>>
>>>> I am not sure how to proceed from here, I am fairly new to gluster
>>>> having inherited this setup from my predecessor and trying to keep it
>>>> going. I have included some info below to try and help with diagnosis,
>>>> please let me know if any further info would be helpful. I would really
>>>> appreciate any advice on what I could try to work out the cause. Thank you
>>>> in advance for reading this, and any suggestions you might be able to
>>>> offer.
>>>>
>>>> - Patrick
>>>>
>>>> This is an example of the main error I see in our brick logs, there
>>>> have been others, I can post them when I see them again too:
>>>> [2019-04-20 04:54:43.055680] E [MSGID: 113001]
>>>> [posix.c:4940:posix_getxattr] 0-gvAA01-posix: getxattr failed on
>>>> /brick1/<filename> library: system.posix_acl_default [Operation not
>>>> supported]
>>>> [2019-04-20 05:01:29.476313] W [posix.c:4929:posix_getxattr]
>>>> 0-gvAA01-posix: Extended attributes not supported (try remounting brick
>>>> with 'user_xattr' flag)
>>>>
>>>> Our setup consists of 2 storage nodes and an arbiter node. I have
>>>> noticed our nodes are on slightly different versions, I'm not sure if this
>>>> could be an issue. We have 9 bricks on each node, made up of ZFS RAIDZ2
>>>> pools - total capacity is around 560TB.
>>>> We have bonded 10gbps NICS on each node, and I have tested bandwidth
>>>> with iperf and found that it's what would be expected from this config.
>>>> Individual brick performance seems ok, I've tested several bricks using
>>>> dd and can write a 10GB files at 1.7GB/s.
>>>>
>>>> # dd if=/dev/zero of=/brick1/test/test.file bs=1M count=10000
>>>> 10000+0 records in
>>>> 10000+0 records out
>>>> 10485760000 bytes (10 GB, 9.8 GiB) copied, 6.20303 s, 1.7 GB/s
>>>>
>>>> Node 1:
>>>> # glusterfs --version
>>>> glusterfs 3.12.15
>>>>
>>>> Node 2:
>>>> # glusterfs --version
>>>> glusterfs 3.12.14
>>>>
>>>> Arbiter:
>>>> # glusterfs --version
>>>> glusterfs 3.12.14
>>>>
>>>> Here is our gluster volume status:
>>>>
>>>> # gluster volume status
>>>> Status of volume: gvAA01
>>>> Gluster process TCP Port RDMA Port
>>>> Online Pid
>>>>
>>>> ------------------------------------------------------------------------------
>>>> Brick 01-B:/brick1/gvAA01/brick 49152 0 Y 7219
>>>> Brick 02-B:/brick1/gvAA01/brick 49152 0 Y 21845
>>>> Brick 00-A:/arbiterAA01/gvAA01/bri
>>>> ck1 49152 0 Y
>>>> 6931
>>>> Brick 01-B:/brick2/gvAA01/brick 49153 0 Y 7239
>>>> Brick 02-B:/brick2/gvAA01/brick 49153 0 Y 9916
>>>> Brick 00-A:/arbiterAA01/gvAA01/bri
>>>> ck2 49153 0 Y
>>>> 6939
>>>> Brick 01-B:/brick3/gvAA01/brick 49154 0 Y 7235
>>>> Brick 02-B:/brick3/gvAA01/brick 49154 0 Y 21858
>>>> Brick 00-A:/arbiterAA01/gvAA01/bri
>>>> ck3 49154 0 Y
>>>> 6947
>>>> Brick 01-B:/brick4/gvAA01/brick 49155 0 Y 31840
>>>> Brick 02-B:/brick4/gvAA01/brick 49155 0 Y 9933
>>>> Brick 00-A:/arbiterAA01/gvAA01/bri
>>>> ck4 49155 0 Y
>>>> 6956
>>>> Brick 01-B:/brick5/gvAA01/brick 49156 0 Y 7233
>>>> Brick 02-B:/brick5/gvAA01/brick 49156 0 Y 9942
>>>> Brick 00-A:/arbiterAA01/gvAA01/bri
>>>> ck5 49156 0 Y
>>>> 6964
>>>> Brick 01-B:/brick6/gvAA01/brick 49157 0 Y 7234
>>>> Brick 02-B:/brick6/gvAA01/brick 49157 0 Y 9952
>>>> Brick 00-A:/arbiterAA01/gvAA01/bri
>>>> ck6 49157 0 Y
>>>> 6974
>>>> Brick 01-B:/brick7/gvAA01/brick 49158 0 Y 7248
>>>> Brick 02-B:/brick7/gvAA01/brick 49158 0 Y 9960
>>>> Brick 00-A:/arbiterAA01/gvAA01/bri
>>>> ck7 49158 0 Y
>>>> 6984
>>>> Brick 01-B:/brick8/gvAA01/brick 49159 0 Y 7253
>>>> Brick 02-B:/brick8/gvAA01/brick 49159 0 Y 9970
>>>> Brick 00-A:/arbiterAA01/gvAA01/bri
>>>> ck8 49159 0 Y
>>>> 6993
>>>> Brick 01-B:/brick9/gvAA01/brick 49160 0 Y 7245
>>>> Brick 02-B:/brick9/gvAA01/brick 49160 0 Y 9984
>>>> Brick 00-A:/arbiterAA01/gvAA01/bri
>>>> ck9 49160 0 Y
>>>> 7001
>>>> NFS Server on localhost 2049 0 Y
>>>> 17276
>>>> Self-heal Daemon on localhost N/A N/A Y
>>>> 25245
>>>> NFS Server on 02-B 2049 0 Y 9089
>>>> Self-heal Daemon on 02-B N/A N/A Y 17838
>>>> NFS Server on 00-a 2049 0 Y 15660
>>>> Self-heal Daemon on 00-a N/A N/A Y 16218
>>>>
>>>> Task Status of Volume gvAA01
>>>>
>>>> ------------------------------------------------------------------------------
>>>> There are no active volume tasks
>>>>
>>>> And gluster volume info:
>>>>
>>>> # gluster volume info
>>>>
>>>> Volume Name: gvAA01
>>>> Type: Distributed-Replicate
>>>> Volume ID: ca4ece2c-13fe-414b-856c-2878196d6118
>>>> Status: Started
>>>> Snapshot Count: 0
>>>> Number of Bricks: 9 x (2 + 1) = 27
>>>> Transport-type: tcp
>>>> Bricks:
>>>> Brick1: 01-B:/brick1/gvAA01/brick
>>>> Brick2: 02-B:/brick1/gvAA01/brick
>>>> Brick3: 00-A:/arbiterAA01/gvAA01/brick1 (arbiter)
>>>> Brick4: 01-B:/brick2/gvAA01/brick
>>>> Brick5: 02-B:/brick2/gvAA01/brick
>>>> Brick6: 00-A:/arbiterAA01/gvAA01/brick2 (arbiter)
>>>> Brick7: 01-B:/brick3/gvAA01/brick
>>>> Brick8: 02-B:/brick3/gvAA01/brick
>>>> Brick9: 00-A:/arbiterAA01/gvAA01/brick3 (arbiter)
>>>> Brick10: 01-B:/brick4/gvAA01/brick
>>>> Brick11: 02-B:/brick4/gvAA01/brick
>>>> Brick12: 00-A:/arbiterAA01/gvAA01/brick4 (arbiter)
>>>> Brick13: 01-B:/brick5/gvAA01/brick
>>>> Brick14: 02-B:/brick5/gvAA01/brick
>>>> Brick15: 00-A:/arbiterAA01/gvAA01/brick5 (arbiter)
>>>> Brick16: 01-B:/brick6/gvAA01/brick
>>>> Brick17: 02-B:/brick6/gvAA01/brick
>>>> Brick18: 00-A:/arbiterAA01/gvAA01/brick6 (arbiter)
>>>> Brick19: 01-B:/brick7/gvAA01/brick
>>>> Brick20: 02-B:/brick7/gvAA01/brick
>>>> Brick21: 00-A:/arbiterAA01/gvAA01/brick7 (arbiter)
>>>> Brick22: 01-B:/brick8/gvAA01/brick
>>>> Brick23: 02-B:/brick8/gvAA01/brick
>>>> Brick24: 00-A:/arbiterAA01/gvAA01/brick8 (arbiter)
>>>> Brick25: 01-B:/brick9/gvAA01/brick
>>>> Brick26: 02-B:/brick9/gvAA01/brick
>>>> Brick27: 00-A:/arbiterAA01/gvAA01/brick9 (arbiter)
>>>> Options Reconfigured:
>>>> cluster.shd-max-threads: 4
>>>> performance.least-prio-threads: 16
>>>> cluster.readdir-optimize: on
>>>> performance.quick-read: off
>>>> performance.stat-prefetch: off
>>>> cluster.data-self-heal: on
>>>> cluster.lookup-unhashed: auto
>>>> cluster.lookup-optimize: on
>>>> cluster.favorite-child-policy: mtime
>>>> server.allow-insecure: on
>>>> transport.address-family: inet
>>>> client.bind-insecure: on
>>>> cluster.entry-self-heal: off
>>>> cluster.metadata-self-heal: off
>>>> performance.md-cache-timeout: 600
>>>> cluster.self-heal-daemon: enable
>>>> performance.readdir-ahead: on
>>>> diagnostics.brick-log-level: INFO
>>>> nfs.disable: off
>>>>
>>>> Thank you for any assistance.
>>>>
>>>> - Patrick
>>>> _______________________________________________
>>>> Gluster-users mailing list
>>>> Gluster-users at gluster.org
>>>> https://lists.gluster.org/mailman/listinfo/gluster-users
>>>>
>>>>
>>>>
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-users/attachments/20190421/09a11517/attachment.html>
More information about the Gluster-users
mailing list