[Gluster-users] Wrong volume size for distributed dispersed volume on 4.1.5

[jring at mail.de]

Hi,

> > So we did a quick grep shared-brick-count /var/lib/glusterd/vols/data_vol1/* on all boxes and found that on 5 out of 6 boxes this was shared-brick-count=0 for all bricks on remote boxes and 1 for local bricks. 
> > 
> > Is this the expected result or should we have all 1 everywhere (as the quick fix script from the case sets it)?
> 
> No , this is fine. The shared-brick-count only needs to be 1 for the local bricks. The value for the remote bricks can be 0.
>  
> > Also on one box (the one where we created the volume from, btw) we have shared-brick-count=0 for all remote bricks and 10 for the local bricks.
> 
> This is a problem. The shared-brick-count should be 1 for the local bricks here as well.
>  
> > Is it possible that the bug from 3.4 still exists in 4.1.5 and should we try the filter script which sets shared-brick-count=1 for all bricks?
> > 
> 
> Can you try 
> 1. restarting glusterd on all the nodes one after another (not at the same time)
> 2. Setting a volume option (say gluster volume set <volname> cluster.min-free-disk 11%) 
> 
> and see if it fixes the issue?

Hi,

ok, this was a quick fix - volume size is correct again and the shared-brick-count is correct everywhere.

We'll duly note this in our wiki.

Thanks a lot!

Joachim
-------------------------------------------------------------------------------------------------
FreeMail powered by mail.de - MEHR SICHERHEIT, SERIOSITÄT UND KOMFORT