[Gluster-users] Upgrade to 4.1.1 geo-replication does not work
Sunny Kumar
sunkumar at redhat.com
Mon Jul 23 09:16:59 UTC 2018
Hi Marcus,
On Wed, Jul 18, 2018 at 4:08 PM Marcus Pedersén <marcus.pedersen at slu.se> wrote:
>
> Hi Kotresh,
>
> I ran:
>
> #ldconfig /usr/lib
can you do -
ldconfig /usr/local/lib
>
> on all nodes in both clusters but I still get the same error.
>
> What to do?
>
>
> Output for:
>
> # ldconfig -p /usr/lib | grep libgf
>
> libgfxdr.so.0 (libc6,x86-64) => /lib64/libgfxdr.so.0
> libgfrpc.so.0 (libc6,x86-64) => /lib64/libgfrpc.so.0
> libgfdb.so.0 (libc6,x86-64) => /lib64/libgfdb.so.0
> libgfchangelog.so.0 (libc6,x86-64) => /lib64/libgfchangelog.so.0
> libgfapi.so.0 (libc6,x86-64) => /lib64/libgfapi.so.0
>
>
> I read somewere that you could change some settings for geo-replication to speed up sync.
>
> I can not remember where I saw that and what config parameters.
>
> When geo-replication works I have 30TB on master cluster that has to be synced to slave nodes,
>
> and that will take a while before the slave nodes have catched up.
>
>
> Thanks and regards
>
> Marcus Pedersén
>
>
> Part of gsyncd.log:
>
> File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 207, in __call__
> raise res
> OSError: libgfchangelog.so: cannot open shared object file: No such file or directory
> [2018-07-18 10:23:52.305119] I [repce(agent /urd-gds/gluster):89:service_loop] RepceServer: terminating on reaching EOF.
> [2018-07-18 10:23:53.273298] I [monitor(monitor):272:monitor] Monitor: worker died in startup phase brick=/urd-gds/gluster
> [2018-07-18 10:24:03.294312] I [monitor(monitor):158:monitor] Monitor: starting gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000
> [2018-07-18 10:24:03.334563] I [gsyncd(agent /urd-gds/gluster):297:main] <top>: Using session config file path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
> [2018-07-18 10:24:03.334702] I [gsyncd(worker /urd-gds/gluster):297:main] <top>: Using session config file path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
> [2018-07-18 10:24:03.335380] I [changelogagent(agent /urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining...
> [2018-07-18 10:24:03.343605] I [resource(worker /urd-gds/gluster):1348:connect_remote] SSH: Initializing SSH connection between master and slave...
> [2018-07-18 10:24:04.881148] I [resource(worker /urd-gds/gluster):1395:connect_remote] SSH: SSH connection between master and slave established. duration=1.5373
> [2018-07-18 10:24:04.881707] I [resource(worker /urd-gds/gluster):1067:connect] GLUSTER: Mounting gluster volume locally...
> [2018-07-18 10:24:05.967451] I [resource(worker /urd-gds/gluster):1090:connect] GLUSTER: Mounted gluster volume duration=1.0853
> [2018-07-18 10:24:05.968028] I [subcmds(worker /urd-gds/gluster):70:subcmd_worker] <top>: Worker spawn successful. Acknowledging back to monitor
> [2018-07-18 10:24:05.984179] E [repce(agent /urd-gds/gluster):114:worker] <top>: call failed:
> Traceback (most recent call last):
> File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 110, in worker
> res = getattr(self.obj, rmeth)(*in_data[2:])
> File "/usr/libexec/glusterfs/python/syncdaemon/changelogagent.py", line 37, in init
> return Changes.cl_init()
> File "/usr/libexec/glusterfs/python/syncdaemon/changelogagent.py", line 21, in __getattr__
> from libgfchangelog import Changes as LChanges
> File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py", line 17, in <module>
> class Changes(object):
> File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py", line 19, in Changes
> use_errno=True)
> File "/usr/lib64/python2.7/ctypes/__init__.py", line 360, in __init__
> self._handle = _dlopen(self._name, mode)
> OSError: libgfchangelog.so: cannot open shared object file: No such file or directory
> [2018-07-18 10:24:05.984647] E [repce(worker /urd-gds/gluster):206:__call__] RepceClient: call failed call=1146:139672481965888:1531909445.98 method=init error=OSError
> [2018-07-18 10:24:05.984747] E [syncdutils(worker /urd-gds/gluster):330:log_raise_exception] <top>: FAIL:
> Traceback (most recent call last):
> File "/usr/libexec/glusterfs/python/syncdaemon/gsyncd.py", line 311, in main
> func(args)
> File "/usr/libexec/glusterfs/python/syncdaemon/subcmds.py", line 72, in subcmd_worker
> local.service_loop(remote)
> File "/usr/libexec/glusterfs/python/syncdaemon/resource.py", line 1236, in service_loop
> changelog_agent.init()
> File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 225, in __call__
> return self.ins(self.meth, *a)
> File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 207, in __call__
> raise res
> OSError: libgfchangelog.so: cannot open shared object file: No such file or directory
I think then you will not see this.
> [2018-07-18 10:24:05.994826] I [repce(agent /urd-gds/gluster):89:service_loop] RepceServer: terminating on reaching EOF.
> [2018-07-18 10:24:06.969984] I [monitor(monitor):272:monitor] Monitor: worker died in startup phase brick=/urd-gds/gluster
>
>
> ________________________________
> Från: Kotresh Hiremath Ravishankar <khiremat at redhat.com>
> Skickat: den 18 juli 2018 06:05
> Till: Marcus Pedersén
> Kopia: gluster-users at gluster.org
> Ämne: Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work
>
> Hi Marcus,
>
> Well there is nothing wrong in setting up a symlink for gluster binary location, but
> there is a geo-rep command to set it so that gsyncd will search there.
>
> To set on master
> #gluster vol geo-rep <mastervol> <slave-vol> config gluster-command-dir <gluster-binary-location>
>
> To set on slave
> #gluster vol geo-rep <mastervol> <slave-vol> config slave-gluster-command-dir <gluster-binary-location>
>
> Thanks,
> Kotresh HR
>
>
> On Wed, Jul 18, 2018 at 9:28 AM, Kotresh Hiremath Ravishankar <khiremat at redhat.com> wrote:
>>
>> Hi Marcus,
>>
>> I am testing out 4.1 myself and I will have some update today.
>> For this particular traceback, gsyncd is not able to find the library.
>> Is it the rpm install? If so, gluster libraries would be in /usr/lib.
>> Please run the cmd below.
>>
>> #ldconfig /usr/lib
>> #ldconfig -p /usr/lib | grep libgf (This should list libgfchangelog.so)
>>
>> Geo-rep should be fixed automatically.
>>
>> Thanks,
>> Kotresh HR
>>
>> On Wed, Jul 18, 2018 at 1:27 AM, Marcus Pedersén <marcus.pedersen at slu.se> wrote:
>>>
>>> Hi again,
>>>
>>> I continue to do some testing, but now I have come to a stage where I need help.
>>>
>>>
>>> gsyncd.log was complaining about that /usr/local/sbin/gluster was missing so I made a link.
>>>
>>> After that /usr/local/sbin/glusterfs was missing so I made a link there as well.
>>>
>>> Both links were done on all slave nodes.
>>>
>>>
>>> Now I have a new error that I can not resolve myself.
>>>
>>> It can not open libgfchangelog.so
>>>
>>>
>>> Many thanks!
>>>
>>> Regards
>>>
>>> Marcus Pedersén
>>>
>>>
>>> Part of gsyncd.log:
>>>
>>> OSError: libgfchangelog.so: cannot open shared object file: No such file or directory
>>> [2018-07-17 19:32:06.517106] I [repce(agent /urd-gds/gluster):89:service_loop] RepceServer: terminating on reaching EOF.
>>> [2018-07-17 19:32:07.479553] I [monitor(monitor):272:monitor] Monitor: worker died in startup phase brick=/urd-gds/gluster
>>> [2018-07-17 19:32:17.500709] I [monitor(monitor):158:monitor] Monitor: starting gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000
>>> [2018-07-17 19:32:17.541547] I [gsyncd(agent /urd-gds/gluster):297:main] <top>: Using session config file path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
>>> [2018-07-17 19:32:17.541959] I [gsyncd(worker /urd-gds/gluster):297:main] <top>: Using session config file path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
>>> [2018-07-17 19:32:17.542363] I [changelogagent(agent /urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining...
>>> [2018-07-17 19:32:17.550894] I [resource(worker /urd-gds/gluster):1348:connect_remote] SSH: Initializing SSH connection between master and slave...
>>> [2018-07-17 19:32:19.166246] I [resource(worker /urd-gds/gluster):1395:connect_remote] SSH: SSH connection between master and slave established. duration=1.6151
>>> [2018-07-17 19:32:19.166806] I [resource(worker /urd-gds/gluster):1067:connect] GLUSTER: Mounting gluster volume locally...
>>> [2018-07-17 19:32:20.257344] I [resource(worker /urd-gds/gluster):1090:connect] GLUSTER: Mounted gluster volume duration=1.0901
>>> [2018-07-17 19:32:20.257921] I [subcmds(worker /urd-gds/gluster):70:subcmd_worker] <top>: Worker spawn successful. Acknowledging back to monitor
>>> [2018-07-17 19:32:20.274647] E [repce(agent /urd-gds/gluster):114:worker] <top>: call failed:
>>> Traceback (most recent call last):
>>> File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 110, in worker
>>> res = getattr(self.obj, rmeth)(*in_data[2:])
>>> File "/usr/libexec/glusterfs/python/syncdaemon/changelogagent.py", line 37, in init
>>> return Changes.cl_init()
>>> File "/usr/libexec/glusterfs/python/syncdaemon/changelogagent.py", line 21, in __getattr__
>>> from libgfchangelog import Changes as LChanges
>>> File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py", line 17, in <module>
>>> class Changes(object):
>>> File "/usr/libexec/glusterfs/python/syncdaemon/libgfchangelog.py", line 19, in Changes
>>> use_errno=True)
>>> File "/usr/lib64/python2.7/ctypes/__init__.py", line 360, in __init__
>>> self._handle = _dlopen(self._name, mode)
>>> OSError: libgfchangelog.so: cannot open shared object file: No such file or directory
>>> [2018-07-17 19:32:20.275093] E [repce(worker /urd-gds/gluster):206:__call__] RepceClient: call failed call=6078:139982918485824:1531855940.27 method=init error=OSError
>>> [2018-07-17 19:32:20.275192] E [syncdutils(worker /urd-gds/gluster):330:log_raise_exception] <top>: FAIL:
>>> Traceback (most recent call last):
>>> File "/usr/libexec/glusterfs/python/syncdaemon/gsyncd.py", line 311, in main
>>> func(args)
>>> File "/usr/libexec/glusterfs/python/syncdaemon/subcmds.py", line 72, in subcmd_worker
>>> local.service_loop(remote)
>>> File "/usr/libexec/glusterfs/python/syncdaemon/resource.py", line 1236, in service_loop
>>> changelog_agent.init()
>>> File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 225, in __call__
>>> return self.ins(self.meth, *a)
>>> File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 207, in __call__
>>> raise res
>>> OSError: libgfchangelog.so: cannot open shared object file: No such file or directory
>>> [2018-07-17 19:32:20.286787] I [repce(agent /urd-gds/gluster):89:service_loop] RepceServer: terminating on reaching EOF.
>>> [2018-07-17 19:32:21.259891] I [monitor(monitor):272:monitor] Monitor: worker died in startup phase brick=/urd-gds/gluster
>>>
>>>
>>>
>>> ________________________________
>>> Från: gluster-users-bounces at gluster.org <gluster-users-bounces at gluster.org> för Marcus Pedersén <marcus.pedersen at slu.se>
>>> Skickat: den 16 juli 2018 21:59
>>> Till: khiremat at redhat.com
>>>
>>> Kopia: gluster-users at gluster.org
>>> Ämne: Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work
>>>
>>>
>>> Hi Kotresh,
>>>
>>> I have been testing for a bit and as you can see from the logs I sent before permission is denied for geouser on slave node on file:
>>>
>>> /var/log/glusterfs/cli.log
>>>
>>> I have turned selinux off and just for testing I changed permissions on /var/log/glusterfs/cli.log so geouser can access it.
>>>
>>> Starting geo-replication after that gives response successful but all nodes get status Faulty.
>>>
>>>
>>> If I run: gluster-mountbroker status
>>>
>>> I get:
>>>
>>> +-----------------------------+-------------+---------------------------+--------------+--------------------------+
>>> | NODE | NODE STATUS | MOUNT ROOT | GROUP | USERS |
>>> +-----------------------------+-------------+---------------------------+--------------+--------------------------+
>>> | urd-gds-geo-001.hgen.slu.se | UP | /var/mountbroker-root(OK) | geogroup(OK) | geouser(urd-gds-volume) |
>>> | urd-gds-geo-002 | UP | /var/mountbroker-root(OK) | geogroup(OK) | geouser(urd-gds-volume) |
>>> | localhost | UP | /var/mountbroker-root(OK) | geogroup(OK) | geouser(urd-gds-volume) |
>>> +-----------------------------+-------------+---------------------------+--------------+--------------------------+
>>>
>>>
>>> and that is all nodes on slave cluster, so mountbroker seems ok.
>>>
>>>
>>> gsyncd.log logs an error about /usr/local/sbin/gluster is missing.
>>>
>>> That is correct cos gluster is in /sbin/gluster and /urs/sbin/gluster
>>>
>>> Another error is that SSH between master and slave is broken,
>>>
>>> but now when I have changed permission on /var/log/glusterfs/cli.log I can run:
>>>
>>> ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret.pem -p 22 geouser at urd-gds-geo-001 gluster --xml --remote-host=localhost volume info urd-gds-volume
>>>
>>> as geouser and that works, which means that the ssh connection works.
>>>
>>>
>>> Is the permissions on /var/log/glusterfs/cli.log changed when geo-replication is setup?
>>>
>>> Is gluster supposed to be in /usr/local/sbin/gluster?
>>>
>>>
>>> Do I have any options or should I remove current geo-replication and create a new?
>>>
>>> How much do I need to clean up before creating a new geo-replication?
>>>
>>> In that case can I pause geo-replication, mount slave cluster on master cluster and run rsync , just to speed up transfer of files?
>>>
>>>
>>> Many thanks in advance!
>>>
>>> Marcus Pedersén
>>>
>>>
>>> Part from the gsyncd.log:
>>>
>>> [2018-07-16 19:34:56.26287] E [syncdutils(worker /urd-gds/gluster):749:errlog] Popen: command returned error cmd=ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replicatio\
>>> n/secret.pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-WrbZ22/bf60c68f1a195dad59573a8dbaa309f2.sock geouser at urd-gds-geo-001 /nonexistent/gsyncd slave urd-gds-volume geouser at urd-gds-geo-001::urd-gds-volu\
>>> me --master-node urd-gds-001 --master-node-id 912bebfd-1a7f-44dc-b0b7-f001a20d58cd --master-brick /urd-gds/gluster --local-node urd-gds-geo-000 --local-node-id 03075698-2bbf-43e4-a99a-65fe82f61794 --slave-timeo\
>>> ut 120 --slave-log-level INFO --slave-gluster-log-level INFO --slave-gluster-command-dir /usr/local/sbin/ error=1
>>> [2018-07-16 19:34:56.26583] E [syncdutils(worker /urd-gds/gluster):753:logerr] Popen: ssh> failure: execution of "/usr/local/sbin/gluster" failed with ENOENT (No such file or directory)
>>> [2018-07-16 19:34:56.33901] I [repce(agent /urd-gds/gluster):89:service_loop] RepceServer: terminating on reaching EOF.
>>> [2018-07-16 19:34:56.34307] I [monitor(monitor):262:monitor] Monitor: worker died before establishing connection brick=/urd-gds/gluster
>>> [2018-07-16 19:35:06.59412] I [monitor(monitor):158:monitor] Monitor: starting gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000
>>> [2018-07-16 19:35:06.99509] I [gsyncd(worker /urd-gds/gluster):297:main] <top>: Using session config file path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
>>> [2018-07-16 19:35:06.99561] I [gsyncd(agent /urd-gds/gluster):297:main] <top>: Using session config file path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
>>> [2018-07-16 19:35:06.100481] I [changelogagent(agent /urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining...
>>> [2018-07-16 19:35:06.108834] I [resource(worker /urd-gds/gluster):1348:connect_remote] SSH: Initializing SSH connection between master and slave...
>>> [2018-07-16 19:35:06.762320] E [syncdutils(worker /urd-gds/gluster):303:log_raise_exception] <top>: connection to peer is broken
>>> [2018-07-16 19:35:06.763103] E [syncdutils(worker /urd-gds/gluster):749:errlog] Popen: command returned error cmd=ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replicatio\
>>> n/secret.pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-K9mB6Q/bf60c68f1a195dad59573a8dbaa309f2.sock geouser at urd-gds-geo-001 /nonexistent/gsyncd slave urd-gds-volume geouser at urd-gds-geo-001::urd-gds-volu\
>>> me --master-node urd-gds-001 --master-node-id 912bebfd-1a7f-44dc-b0b7-f001a20d58cd --master-brick /urd-gds/gluster --local-node urd-gds-geo-000 --local-node-id 03075698-2bbf-43e4-a99a-65fe82f61794 --slave-timeo\
>>> ut 120 --slave-log-level INFO --slave-gluster-log-level INFO --slave-gluster-command-dir /usr/local/sbin/ error=1
>>> [2018-07-16 19:35:06.763398] E [syncdutils(worker /urd-gds/gluster):753:logerr] Popen: ssh> failure: execution of "/usr/local/sbin/gluster" failed with ENOENT (No such file or directory)
>>> [2018-07-16 19:35:06.771905] I [repce(agent /urd-gds/gluster):89:service_loop] RepceServer: terminating on reaching EOF.
>>> [2018-07-16 19:35:06.772272] I [monitor(monitor):262:monitor] Monitor: worker died before establishing connection brick=/urd-gds/gluster
>>> [2018-07-16 19:35:16.786387] I [monitor(monitor):158:monitor] Monitor: starting gsyncd worker brick=/urd-gds/gluster slave_node=urd-gds-geo-000
>>> [2018-07-16 19:35:16.828056] I [gsyncd(worker /urd-gds/gluster):297:main] <top>: Using session config file path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
>>> [2018-07-16 19:35:16.828066] I [gsyncd(agent /urd-gds/gluster):297:main] <top>: Using session config file path=/var/lib/glusterd/geo-replication/urd-gds-volume_urd-gds-geo-001_urd-gds-volume/gsyncd.conf
>>> [2018-07-16 19:35:16.828912] I [changelogagent(agent /urd-gds/gluster):72:__init__] ChangelogAgent: Agent listining...
>>> [2018-07-16 19:35:16.837100] I [resource(worker /urd-gds/gluster):1348:connect_remote] SSH: Initializing SSH connection between master and slave...
>>> [2018-07-16 19:35:17.260257] E [syncdutils(worker /urd-gds/gluster):303:log_raise_exception] <top>: connection to peer is broken
>>>
>>> ________________________________
>>> Från: gluster-users-bounces at gluster.org <gluster-users-bounces at gluster.org> för Marcus Pedersén <marcus.pedersen at slu.se>
>>> Skickat: den 13 juli 2018 14:50
>>> Till: Kotresh Hiremath Ravishankar
>>> Kopia: gluster-users at gluster.org
>>> Ämne: Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work
>>>
>>> Hi Kotresh,
>>> Yes, all nodes have the same version 4.1.1 both master and slave.
>>> All glusterd are crashing on the master side.
>>> Will send logs tonight.
>>>
>>> Thanks,
>>> Marcus
>>>
>>> ################
>>> Marcus Pedersén
>>> Systemadministrator
>>> Interbull Centre
>>> ################
>>> Sent from my phone
>>> ################
>>>
>>> Den 13 juli 2018 11:28 skrev Kotresh Hiremath Ravishankar <khiremat at redhat.com>:
>>>
>>> Hi Marcus,
>>>
>>> Is the gluster geo-rep version is same on both master and slave?
>>>
>>> Thanks,
>>> Kotresh HR
>>>
>>> On Fri, Jul 13, 2018 at 1:26 AM, Marcus Pedersén <marcus.pedersen at slu.se> wrote:
>>>
>>> Hi Kotresh,
>>>
>>> i have replaced both files (gsyncdconfig.py and repce.py) in all nodes both master and slave.
>>>
>>> I rebooted all servers but geo-replication status is still Stopped.
>>>
>>> I tried to start geo-replication with response Successful but status still show Stopped on all nodes.
>>>
>>> Nothing has been written to geo-replication logs since I sent the tail of the log.
>>>
>>> So I do not know what info to provide?
>>>
>>>
>>> Please, help me to find a way to solve this.
>>>
>>>
>>> Thanks!
>>>
>>>
>>> Regards
>>>
>>> Marcus
>>>
>>>
>>> ________________________________
>>> Från: gluster-users-bounces at gluster.org <gluster-users-bounces at gluster.org> för Marcus Pedersén <marcus.pedersen at slu.se>
>>> Skickat: den 12 juli 2018 08:51
>>> Till: Kotresh Hiremath Ravishankar
>>> Kopia: gluster-users at gluster.org
>>> Ämne: Re: [Gluster-users] Upgrade to 4.1.1 geo-replication does not work
>>>
>>> Thanks Kotresh,
>>> I installed through the official centos channel, centos-release-gluster41.
>>> Isn't this fix included in centos install?
>>> I will have a look, test it tonight and come back to you!
>>>
>>> Thanks a lot!
>>>
>>> Regards
>>> Marcus
>>>
>>> ################
>>> Marcus Pedersén
>>> Systemadministrator
>>> Interbull Centre
>>> ################
>>> Sent from my phone
>>> ################
>>>
>>> Den 12 juli 2018 07:41 skrev Kotresh Hiremath Ravishankar <khiremat at redhat.com>:
>>>
>>> Hi Marcus,
>>>
>>> I think the fix [1] is needed in 4.1
>>> Could you please this out and let us know if that works for you?
>>>
>>> [1] https://review.gluster.org/#/c/20207/
>>>
>>> Thanks,
>>> Kotresh HR
>>>
>>> On Thu, Jul 12, 2018 at 1:49 AM, Marcus Pedersén <marcus.pedersen at slu.se> wrote:
>>>
>>> Hi all,
>>>
>>> I have upgraded from 3.12.9 to 4.1.1 and been following upgrade instructions for offline upgrade.
>>>
>>> I upgraded geo-replication side first 1 x (2+1) and the master side after that 2 x (2+1).
>>>
>>> Both clusters works the way they should on their own.
>>>
>>> After upgrade on master side status for all geo-replication nodes is Stopped.
>>>
>>> I tried to start the geo-replication from master node and response back was started successfully.
>>>
>>> Status again .... Stopped
>>>
>>> Tried to start again and get response started successfully, after that all glusterd crashed on all master nodes.
>>>
>>> After a restart of all glusterd the master cluster was up again.
>>>
>>> Status for geo-replication is still Stopped and every try to start it after this gives the response successful but still status Stopped.
>>>
>>>
>>> Please help me get the geo-replication up and running again.
>>>
>>>
>>> Best regards
>>>
>>> Marcus Pedersén
>>>
>>>
>>> Part of geo-replication log from master node:
>>>
>>> [2018-07-11 18:42:48.941760] I [changelogagent(/urd-gds/gluster):73:__init__] ChangelogAgent: Agent listining...
>>> [2018-07-11 18:42:48.947567] I [resource(/urd-gds/gluster):1780:connect_remote] SSH: Initializing SSH connection between master and slave...
>>> [2018-07-11 18:42:49.363514] E [syncdutils(/urd-gds/gluster):304:log_raise_exception] <top>: connection to peer is broken
>>> [2018-07-11 18:42:49.364279] E [resource(/urd-gds/gluster):210:errlog] Popen: command returned error cmd=ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret\
>>> .pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-hjRhBo/7e5534547f3675a710a107722317484f.sock geouser at urd-gds-geo-000 /nonexistent/gsyncd --session-owner 5e94eb7d-219f-4741-a179-d4ae6b50c7ee --local-id .%\
>>> 2Furd-gds%2Fgluster --local-node urd-gds-001 -N --listen --timeout 120 gluster://localhost:urd-gds-volume error=2
>>> [2018-07-11 18:42:49.364586] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh> usage: gsyncd.py [-h]
>>> [2018-07-11 18:42:49.364799] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh>
>>> [2018-07-11 18:42:49.364989] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh> {monitor-status,monitor,worker,agent,slave,status,config-check,config-get,config-set,config-reset,voluuidget,d\
>>> elete}
>>> [2018-07-11 18:42:49.365210] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh> ...
>>> [2018-07-11 18:42:49.365408] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh> gsyncd.py: error: argument subcmd: invalid choice: '5e94eb7d-219f-4741-a179-d4ae6b50c7ee' (choose from 'monitor-status', 'monit\
>>> or', 'worker', 'agent', 'slave', 'status', 'config-check', 'config-get', 'config-set', 'config-reset', 'voluuidget', 'delete')
>>> [2018-07-11 18:42:49.365919] I [syncdutils(/urd-gds/gluster):271:finalize] <top>: exiting.
>>> [2018-07-11 18:42:49.369316] I [repce(/urd-gds/gluster):92:service_loop] RepceServer: terminating on reaching EOF.
>>> [2018-07-11 18:42:49.369921] I [syncdutils(/urd-gds/gluster):271:finalize] <top>: exiting.
>>> [2018-07-11 18:42:49.369694] I [monitor(monitor):353:monitor] Monitor: worker died before establishing connection brick=/urd-gds/gluster
>>> [2018-07-11 18:42:59.492762] I [monitor(monitor):280:monitor] Monitor: starting gsyncd worker brick=/urd-gds/gluster slave_node=ssh://geouser@urd-gds-geo-000:gluster://localhost:urd-gds-volume
>>> [2018-07-11 18:42:59.558491] I [resource(/urd-gds/gluster):1780:connect_remote] SSH: Initializing SSH connection between master and slave...
>>> [2018-07-11 18:42:59.559056] I [changelogagent(/urd-gds/gluster):73:__init__] ChangelogAgent: Agent listining...
>>> [2018-07-11 18:42:59.945693] E [syncdutils(/urd-gds/gluster):304:log_raise_exception] <top>: connection to peer is broken
>>> [2018-07-11 18:42:59.946439] E [resource(/urd-gds/gluster):210:errlog] Popen: command returned error cmd=ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret\
>>> .pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-992bk7/7e5534547f3675a710a107722317484f.sock geouser at urd-gds-geo-000 /nonexistent/gsyncd --session-owner 5e94eb7d-219f-4741-a179-d4ae6b50c7ee --local-id .%\
>>> 2Furd-gds%2Fgluster --local-node urd-gds-001 -N --listen --timeout 120 gluster://localhost:urd-gds-volume error=2
>>> [2018-07-11 18:42:59.946748] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh> usage: gsyncd.py [-h]
>>> [2018-07-11 18:42:59.946962] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh>
>>> [2018-07-11 18:42:59.947150] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh> {monitor-status,monitor,worker,agent,slave,status,config-check,config-get,config-set,config-reset,voluuidget,d\
>>> elete}
>>> [2018-07-11 18:42:59.947369] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh> ...
>>> [2018-07-11 18:42:59.947552] E [resource(/urd-gds/gluster):214:logerr] Popen: ssh> gsyncd.py: error: argument subcmd: invalid choice: '5e94eb7d-219f-4741-a179-d4ae6b50c7ee' (choose from 'monitor-status', 'monit\
>>> or', 'worker', 'agent', 'slave', 'status', 'config-check', 'config-get', 'config-set', 'config-reset', 'voluuidget', 'delete')
>>> [2018-07-11 18:42:59.948046] I [syncdutils(/urd-gds/gluster):271:finalize] <top>: exiting.
>>> [2018-07-11 18:42:59.951392] I [repce(/urd-gds/gluster):92:service_loop] RepceServer: terminating on reaching EOF.
>>> [2018-07-11 18:42:59.951760] I [syncdutils(/urd-gds/gluster):271:finalize] <top>: exiting.
>>> [2018-07-11 18:42:59.951817] I [monitor(monitor):353:monitor] Monitor: worker died before establishing connection brick=/urd-gds/gluster
>>> [2018-07-11 18:43:10.54580] I [monitor(monitor):280:monitor] Monitor: starting gsyncd worker brick=/urd-gds/gluster slave_node=ssh://geouser@urd-gds-geo-000:gluster://localhost:urd-gds-volume
>>> [2018-07-11 18:43:10.88356] I [monitor(monitor):345:monitor] Monitor: Changelog Agent died, Aborting Worker brick=/urd-gds/gluster
>>> [2018-07-11 18:43:10.88613] I [monitor(monitor):353:monitor] Monitor: worker died before establishing connection brick=/urd-gds/gluster
>>> [2018-07-11 18:43:20.112435] I [gsyncdstatus(monitor):242:set_worker_status] GeorepStatus: Worker Status Change status=inconsistent
>>> [2018-07-11 18:43:20.112885] E [syncdutils(monitor):331:log_raise_exception] <top>: FAIL:
>>> Traceback (most recent call last):
>>> File "/usr/libexec/glusterfs/python/syncdaemon/syncdutils.py", line 361, in twrap
>>> except:
>>> File "/usr/libexec/glusterfs/python/syncdaemon/monitor.py", line 428, in wmon
>>> sys.exit()
>>> TypeError: 'int' object is not iterable
>>> [2018-07-11 18:43:20.114610] I [syncdutils(monitor):271:finalize] <top>: exiting.
>>>
>>> ---
>>> När du skickar e-post till SLU så innebär detta att SLU behandlar dina personuppgifter. För att läsa mer om hur detta går till, klicka här
>>> E-mailing SLU will result in SLU processing your personal data. For more information on how this is done, click here
>>>
>>>
>>> _______________________________________________
>>> Gluster-users mailing list
>>> Gluster-users at gluster.org
>>> https://lists.gluster.org/mailman/listinfo/gluster-users
>>>
>>>
>>>
>>>
>>> --
>>> Thanks and Regards,
>>> Kotresh H R
>>>
>>>
>>> ---
>>> När du skickar e-post till SLU så innebär detta att SLU behandlar dina personuppgifter. För att läsa mer om hur detta går till, klicka här
>>> E-mailing SLU will result in SLU processing your personal data. For more information on how this is done, click here
>>>
>>> ---
>>> När du skickar e-post till SLU så innebär detta att SLU behandlar dina personuppgifter. För att läsa mer om hur detta går till, klicka här
>>> E-mailing SLU will result in SLU processing your personal data. For more information on how this is done, click here
>>>
>>>
>>>
>>>
>>> --
>>> Thanks and Regards,
>>> Kotresh H R
>>>
>>>
>>> ---
>>> När du skickar e-post till SLU så innebär detta att SLU behandlar dina personuppgifter. För att läsa mer om hur detta går till, klicka här
>>> E-mailing SLU will result in SLU processing your personal data. For more information on how this is done, click here
>>>
>>> ---
>>> När du skickar e-post till SLU så innebär detta att SLU behandlar dina personuppgifter. För att läsa mer om hur detta går till, klicka här
>>> E-mailing SLU will result in SLU processing your personal data. For more information on how this is done, click here
>>>
>>> ---
>>> När du skickar e-post till SLU så innebär detta att SLU behandlar dina personuppgifter. För att läsa mer om hur detta går till, klicka här
>>> E-mailing SLU will result in SLU processing your personal data. For more information on how this is done, click here
>>
>>
>>
>>
>> --
>> Thanks and Regards,
>> Kotresh H R
>
>
>
>
> --
> Thanks and Regards,
> Kotresh H R
>
> ---
> När du skickar e-post till SLU så innebär detta att SLU behandlar dina personuppgifter. För att läsa mer om hur detta går till, klicka här
> E-mailing SLU will result in SLU processing your personal data. For more information on how this is done, click here
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> https://lists.gluster.org/mailman/listinfo/gluster-users
More information about the Gluster-users
mailing list