[Gluster-users] Turn off replication
Hari Gowtham
hgowtham at redhat.com
Fri Apr 27 10:16:52 UTC 2018
Hi Jose,
Why are all the bricks visible in volume info if the pre-validation
for add-brick failed? I suspect that the remove brick wasn't done
properly.
You can provide the cmd_history.log to verify this. Better to get the
other log messages.
Also I need to know what are the bricks that were actually removed,
the command used and its output.
On Thu, Apr 26, 2018 at 3:47 AM, Jose Sanchez <josesanc at carc.unm.edu> wrote:
> Looking at the logs , it seems that it is trying to add using the same port
> was assigned for gluster01ib:
>
>
> Any Ideas??
>
> Jose
>
>
>
> [2018-04-25 22:08:55.169302] I [MSGID: 106482]
> [glusterd-brick-ops.c:447:__glusterd_handle_add_brick] 0-management:
> Received add brick req
> [2018-04-25 22:08:55.186037] I [run.c:191:runner_log]
> (-->/usr/lib64/glusterfs/3.8.15/xlator/mgmt/glusterd.so(+0x33045)
> [0x7f5464b9b045]
> -->/usr/lib64/glusterfs/3.8.15/xlator/mgmt/glusterd.so(+0xcbd85)
> [0x7f5464c33d85] -->/lib64/libglusterfs.so.0(runner_log+0x115)
> [0x7f54704cf1e5] ) 0-management: Ran script:
> /var/lib/glusterd/hooks/1/add-brick/pre/S28Quota-enable-root-xattr-heal.sh
> --volname=scratch --version=1 --volume-op=add-brick
> --gd-workdir=/var/lib/glusterd
> [2018-04-25 22:08:55.309534] I [MSGID: 106143]
> [glusterd-pmap.c:250:pmap_registry_bind] 0-pmap: adding brick
> /gdata/brick1/scratch on port 49152
> [2018-04-25 22:08:55.309659] I [MSGID: 106143]
> [glusterd-pmap.c:250:pmap_registry_bind] 0-pmap: adding brick
> /gdata/brick1/scratch.rdma on port 49153
> [2018-04-25 22:08:55.310231] E [MSGID: 106005]
> [glusterd-utils.c:4877:glusterd_brick_start] 0-management: Unable to start
> brick gluster02ib:/gdata/brick1/scratch
> [2018-04-25 22:08:55.310275] E [MSGID: 106074]
> [glusterd-brick-ops.c:2493:glusterd_op_add_brick] 0-glusterd: Unable to add
> bricks
> [2018-04-25 22:08:55.310304] E [MSGID: 106123]
> [glusterd-mgmt.c:294:gd_mgmt_v3_commit_fn] 0-management: Add-brick commit
> failed.
> [2018-04-25 22:08:55.310316] E [MSGID: 106123]
> [glusterd-mgmt.c:1427:glusterd_mgmt_v3_commit] 0-management: Commit failed
> for operation Add brick on local node
> [2018-04-25 22:08:55.310330] E [MSGID: 106123]
> [glusterd-mgmt.c:2018:glusterd_mgmt_v3_initiate_all_phases] 0-management:
> Commit Op Failed
> [2018-04-25 22:09:11.678141] E [MSGID: 106452]
> [glusterd-utils.c:6064:glusterd_new_brick_validate] 0-management: Brick:
> gluster02ib:/gdata/brick1/scratch not available. Brick may be containing or
> be contained by an existing brick
> [2018-04-25 22:09:11.678184] W [MSGID: 106122]
> [glusterd-mgmt.c:188:gd_mgmt_v3_pre_validate_fn] 0-management: ADD-brick
> prevalidation failed.
> [2018-04-25 22:09:11.678200] E [MSGID: 106122]
> [glusterd-mgmt-handler.c:337:glusterd_handle_pre_validate_fn] 0-management:
> Pre Validation failed on operation Add brick
> [root at gluster02 glusterfs]# gluster volume status scratch
> Status of volume: scratch
> Gluster process TCP Port RDMA Port Online Pid
> ------------------------------------------------------------------------------
> Brick gluster01ib:/gdata/brick1/scratch 49152 49153 Y
> 1819
> Brick gluster01ib:/gdata/brick2/scratch 49154 49155 Y
> 1827
> Brick gluster02ib:/gdata/brick1/scratch N/A N/A N N/A
>
>
>
> Task Status of Volume scratch
> ------------------------------------------------------------------------------
> There are no active volume tasks
>
>
>
> [root at gluster02 glusterfs]#
>
>
>
> On Apr 25, 2018, at 3:23 PM, Jose Sanchez <josesanc at carc.unm.edu> wrote:
>
> Hello Karthik
>
>
> Im having trouble adding the two bricks back online. Any help is
> appreciated
>
> thanks
>
>
> when i try to add-brick command this is what i get
>
> [root at gluster01 ~]# gluster volume add-brick scratch
> gluster02ib:/gdata/brick2/scratch/
> volume add-brick: failed: Pre Validation failed on gluster02ib. Brick:
> gluster02ib:/gdata/brick2/scratch not available. Brick may be containing or
> be contained by an existing brick
>
> I have run the following commands and remove the .glusterfs hidden
> directories
>
> [root at gluster02 ~]# setfattr -x trusted.glusterfs.volume-id
> /gdata/brick2/scratch/
> setfattr: /gdata/brick2/scratch/: No such attribute
> [root at gluster02 ~]# setfattr -x trusted.gfid /gdata/brick2/scratch/
> setfattr: /gdata/brick2/scratch/: No such attribute
> [root at gluster02 ~]#
>
>
> this is what I get when I run status and info
>
>
> [root at gluster01 ~]# gluster volume info scratch
>
> Volume Name: scratch
> Type: Distribute
> Volume ID: 23f1e4b1-b8e0-46c3-874a-58b4728ea106
> Status: Started
> Snapshot Count: 0
> Number of Bricks: 4
> Transport-type: tcp,rdma
> Bricks:
> Brick1: gluster01ib:/gdata/brick1/scratch
> Brick2: gluster01ib:/gdata/brick2/scratch
> Brick3: gluster02ib:/gdata/brick1/scratch
> Brick4: gluster02ib:/gdata/brick2/scratch
> Options Reconfigured:
> nfs.disable: on
> performance.readdir-ahead: on
> [root at gluster01 ~]#
>
>
> [root at gluster02 ~]# gluster volume status scratch
> Status of volume: scratch
> Gluster process TCP Port RDMA Port Online Pid
> ------------------------------------------------------------------------------
> Brick gluster01ib:/gdata/brick1/scratch 49156 49157 Y
> 1819
> Brick gluster01ib:/gdata/brick2/scratch 49158 49159 Y
> 1827
> Brick gluster02ib:/gdata/brick1/scratch N/A N/A N N/A
> Brick gluster02ib:/gdata/brick2/scratch N/A N/A N N/A
>
> Task Status of Volume scratch
> ------------------------------------------------------------------------------
> There are no active volume tasks
>
> [root at gluster02 ~]#
>
>
> This are the logs files from Gluster ETC
>
> [2018-04-25 20:56:54.390662] I [MSGID: 106143]
> [glusterd-pmap.c:250:pmap_registry_bind] 0-pmap: adding brick
> /gdata/brick1/scratch on port 49152
> [2018-04-25 20:56:54.390798] I [MSGID: 106143]
> [glusterd-pmap.c:250:pmap_registry_bind] 0-pmap: adding brick
> /gdata/brick1/scratch.rdma on port 49153
> [2018-04-25 20:56:54.391401] E [MSGID: 106005]
> [glusterd-utils.c:4877:glusterd_brick_start] 0-management: Unable to start
> brick gluster02ib:/gdata/brick1/scratch
> [2018-04-25 20:56:54.391457] E [MSGID: 106074]
> [glusterd-brick-ops.c:2493:glusterd_op_add_brick] 0-glusterd: Unable to add
> bricks
> [2018-04-25 20:56:54.391476] E [MSGID: 106123]
> [glusterd-mgmt.c:294:gd_mgmt_v3_commit_fn] 0-management: Add-brick commit
> failed.
> [2018-04-25 20:56:54.391490] E [MSGID: 106123]
> [glusterd-mgmt-handler.c:603:glusterd_handle_commit_fn] 0-management: commit
> failed on operation Add brick
> [2018-04-25 20:58:55.332262] I [MSGID: 106499]
> [glusterd-handler.c:4349:__glusterd_handle_status_volume] 0-management:
> Received status volume req for volume scratch
> [2018-04-25 21:02:07.464357] E [MSGID: 106452]
> [glusterd-utils.c:6064:glusterd_new_brick_validate] 0-management: Brick:
> gluster02ib:/gdata/brick1/scratch not available. Brick may be containing or
> be contained by an existing brick
> [2018-04-25 21:02:07.464395] W [MSGID: 106122]
> [glusterd-mgmt.c:188:gd_mgmt_v3_pre_validate_fn] 0-management: ADD-brick
> prevalidation failed.
> [2018-04-25 21:02:07.464414] E [MSGID: 106122]
> [glusterd-mgmt-handler.c:337:glusterd_handle_pre_validate_fn] 0-management:
> Pre Validation failed on operation Add brick
> [2018-04-25 21:04:56.198662] E [MSGID: 106452]
> [glusterd-utils.c:6064:glusterd_new_brick_validate] 0-management: Brick:
> gluster02ib:/gdata/brick2/scratch not available. Brick may be containing or
> be contained by an existing brick
> [2018-04-25 21:04:56.198700] W [MSGID: 106122]
> [glusterd-mgmt.c:188:gd_mgmt_v3_pre_validate_fn] 0-management: ADD-brick
> prevalidation failed.
> [2018-04-25 21:04:56.198716] E [MSGID: 106122]
> [glusterd-mgmt-handler.c:337:glusterd_handle_pre_validate_fn] 0-management:
> Pre Validation failed on operation Add brick
> [2018-04-25 21:07:11.084205] I [MSGID: 106482]
> [glusterd-brick-ops.c:447:__glusterd_handle_add_brick] 0-management:
> Received add brick req
> [2018-04-25 21:07:11.087682] E [MSGID: 106452]
> [glusterd-utils.c:6064:glusterd_new_brick_validate] 0-management: Brick:
> gluster02ib:/gdata/brick2/scratch not available. Brick may be containing or
> be contained by an existing brick
> [2018-04-25 21:07:11.087716] W [MSGID: 106122]
> [glusterd-mgmt.c:188:gd_mgmt_v3_pre_validate_fn] 0-management: ADD-brick
> prevalidation failed.
> [2018-04-25 21:07:11.087729] E [MSGID: 106122]
> [glusterd-mgmt.c:884:glusterd_mgmt_v3_pre_validate] 0-management: Pre
> Validation failed for operation Add brick on local node
> [2018-04-25 21:07:11.087741] E [MSGID: 106122]
> [glusterd-mgmt.c:2009:glusterd_mgmt_v3_initiate_all_phases] 0-management:
> Pre Validation Failed
> [2018-04-25 21:12:22.340221] E [MSGID: 106452]
> [glusterd-utils.c:6064:glusterd_new_brick_validate] 0-management: Brick:
> gluster02ib:/gdata/brick2/scratch not available. Brick may be containing or
> be contained by an existing brick
> [2018-04-25 21:12:22.340259] W [MSGID: 106122]
> [glusterd-mgmt.c:188:gd_mgmt_v3_pre_validate_fn] 0-management: ADD-brick
> prevalidation failed.
> [2018-04-25 21:12:22.340274] E [MSGID: 106122]
> [glusterd-mgmt-handler.c:337:glusterd_handle_pre_validate_fn] 0-management:
> Pre Validation failed on operation Add brick
> [2018-04-25 21:18:13.427036] I [MSGID: 106499]
> [glusterd-handler.c:4349:__glusterd_handle_status_volume] 0-management:
> Received status volume req for volume scratch
> [root at gluster02 glusterfs]#
>
>
> ---------------------------------
> Jose Sanchez
> Systems/Network Analyst 1
> Center of Advanced Research Computing
> 1601 Central Ave.
> MSC 01 1190
> Albuquerque, NM 87131-0001
> carc.unm.edu
> 575.636.4232
>
> On Apr 12, 2018, at 12:11 AM, Karthik Subrahmanya <ksubrahm at redhat.com>
> wrote:
>
>
>
> On Wed, Apr 11, 2018 at 7:38 PM, Jose Sanchez <josesanc at carc.unm.edu> wrote:
>>
>> Hi Karthik
>>
>> Looking at the information you have provided me, I would like to make sure
>> that I’m running the right commands.
>>
>> 1. gluster volume heal scratch info
>
> If the count is non zero, trigger the heal and wait for heal info count to
> become zero.
>>
>> 2. gluster volume remove-brick scratch replica 1
>> gluster02ib:/gdata/brick1/scratch gluster02ib:/gdata/brick2/scratch force
>>
>> 3. gluster volume add-brick “#" scratch gluster02ib:/gdata/brick1/scratch
>> gluster02ib:/gdata/brick2/scratch
>>
>>
>> Based on the configuration I have, Brick 1 from Node A and B are tide
>> together and Brick 2 from Node A and B are also tide together. Looking at
>> your remove command (step #2), it seems that you want me to remove Brick 1
>> and 2 from Node B (gluster02ib). is that correct? I thought the data was
>> distributed in bricks 1 between nodes A and B) and duplicated on Bricks 2
>> (node A and B).
>
> Data is duplicated between bricks 1 of nodes A & B and bricks 2 of nodes A &
> B and data is distributed between these two pairs.
> You need not always remove the bricks 1 & 2 from node B itself. The idea
> here is to keep one copy from both the replica pairs.
>>
>>
>> Also when I add the bricks back to gluster, do I need to specify if it is
>> distributed or replicated?? and Do i need a configuration #?? for example on
>> your command (Step #2) you have “replica 1” when remove bricks, do I need to
>> do the same when adding the nodes back ?
>
> No. You just need to erase the data on those bricks and add those bricks
> back to the volume. The previous remove-brick command will make the volume
> plain distribute. Then simply adding the bricks without specifying any "#"
> will expand the volume as a plain distribute volue.
>>
>>
>> Im planning on moving with this changes in few days. At this point each
>> brick has 14tb and adding bricks 1 from node A and B, i have a total of
>> 28tb, After doing all the process, (removing and adding bricks) I should be
>> able to see a total of 56Tb right ?
>
> Yes after all these you will have 56TB in total.
> After adding the bricks, do volume rebalance, so that the data which were
> present previously, will be moved to the correct bricks.
>
> HTH,
> Karthik
>>
>>
>> Thanks
>>
>> Jose
>>
>>
>>
>>
>> ---------------------------------
>> Jose Sanchez
>> Systems/Network Analyst 1
>> Center of Advanced Research Computing
>> 1601 Central Ave.
>> MSC 01 1190
>> Albuquerque, NM 87131-0001
>> carc.unm.edu
>> 575.636.4232
>>
>> On Apr 7, 2018, at 8:29 AM, Karthik Subrahmanya <ksubrahm at redhat.com>
>> wrote:
>>
>> Hi Jose,
>>
>> Thanks for providing the volume info. You have 2 subvolumes. Data is
>> replicated within the bricks of that subvolumes.
>> First one consisting of Node A's brick1 & Node B's brick1 and the second
>> one consisting of Node A's brick2 and Node B's brick2.
>> You don't have the same data on all the 4 bricks. Data are distributed
>> between these two subvolumes.
>> To remove the replica you can use the command
>> gluster volume remove-brick scratch replica 1
>> gluster02ib:/gdata/brick1/scratch gluster02ib:/gdata/brick2/scratch force
>> So you will have one copy of data present from both the distributes.
>> Before doing this make sure "gluster volume heal scratch info" value is
>> zero. So copies you retain will have the correct data.
>> After the remove-brick erase the data from the backend.
>> Then you can expand the volume by following the steps at [1].
>>
>> [1]
>> https://docs.gluster.org/en/latest/Administrator%20Guide/Managing%20Volumes/#expanding-volumes
>>
>> Regards,
>> Karthik
>>
>> On Fri, Apr 6, 2018 at 11:39 PM, Jose Sanchez <josesanc at carc.unm.edu>
>> wrote:
>>>
>>> Hi Karthik
>>>
>>> this is our configuration, is 2x2 =4 , they are all replicated , each
>>> brick has 14tb. we have 2 nodes A and B, each one with brick 1 and 2.
>>>
>>> Node A (replicated A1 (14tb) and B1 (14tb) ) same with node B
>>> (Replicated A2 (14tb) and B2 (14tb)).
>>>
>>> Do you think we need to degrade the node first before removing it. i
>>> believe the same copy of data is on all 4 bricks, we would like to keep one
>>> of them, and add the other bricks as extra space
>>>
>>> Thanks for your help on this
>>>
>>> Jose
>>>
>>>
>>>
>>>
>>>
>>> [root at gluster01 ~]# gluster volume info scratch
>>>
>>> Volume Name: scratch
>>> Type: Distributed-Replicate
>>> Volume ID: 23f1e4b1-b8e0-46c3-874a-58b4728ea106
>>> Status: Started
>>> Snapshot Count: 0
>>> Number of Bricks: 2 x 2 = 4
>>> Transport-type: tcp,rdma
>>> Bricks:
>>> Brick1: gluster01ib:/gdata/brick1/scratch
>>> Brick2: gluster02ib:/gdata/brick1/scratch
>>> Brick3: gluster01ib:/gdata/brick2/scratch
>>> Brick4: gluster02ib:/gdata/brick2/scratch
>>> Options Reconfigured:
>>> performance.readdir-ahead: on
>>> nfs.disable: on
>>>
>>> [root at gluster01 ~]# gluster volume status all
>>> Status of volume: scratch
>>> Gluster process TCP Port RDMA Port Online
>>> Pid
>>>
>>> ------------------------------------------------------------------------------
>>> Brick gluster01ib:/gdata/brick1/scratch 49152 49153 Y
>>> 1743
>>> Brick gluster02ib:/gdata/brick1/scratch 49156 49157 Y
>>> 1732
>>> Brick gluster01ib:/gdata/brick2/scratch 49154 49155 Y
>>> 1738
>>> Brick gluster02ib:/gdata/brick2/scratch 49158 49159 Y
>>> 1733
>>> Self-heal Daemon on localhost N/A N/A Y
>>> 1728
>>> Self-heal Daemon on gluster02ib N/A N/A Y
>>> 1726
>>>
>>> Task Status of Volume scratch
>>>
>>> ------------------------------------------------------------------------------
>>> There are no active volume tasks
>>>
>>> ---------------------------------
>>> Jose Sanchez
>>> Systems/Network Analyst 1
>>> Center of Advanced Research Computing
>>> 1601 Central Ave.
>>> MSC 01 1190
>>> Albuquerque, NM 87131-0001
>>> carc.unm.edu
>>> 575.636.4232
>>>
>>> On Apr 6, 2018, at 3:49 AM, Karthik Subrahmanya <ksubrahm at redhat.com>
>>> wrote:
>>>
>>> Hi Jose,
>>>
>>> By switching into pure distribute volume you will lose availability if
>>> something goes bad.
>>>
>>> I am guessing you have a nX2 volume.
>>> If you want to preserve one copy of the data in all the distributes, you
>>> can do that by decreasing the replica count in the remove-brick operation.
>>> If you have any inconsistency, heal them first using the "gluster volume
>>> heal <volname>" command and wait till the
>>> "gluster volume heal <volname> info" output becomes zero, before removing
>>> the bricks, so that you will have the correct data.
>>> If you do not want to preserve the data then you can directly remove the
>>> bricks.
>>> Even after removing the bricks the data will be present in the backend of
>>> the removed bricks. You have to manually erase them (both data and
>>> .glusterfs folder).
>>> See [1] for more details on remove-brick.
>>>
>>> [1].
>>> https://docs.gluster.org/en/latest/Administrator%20Guide/Managing%20Volumes/#shrinking-volumes
>>>
>>> HTH,
>>> Karthik
>>>
>>>
>>> On Thu, Apr 5, 2018 at 8:17 PM, Jose Sanchez <josesanc at carc.unm.edu>
>>> wrote:
>>>>
>>>>
>>>> We have a Gluster setup with 2 nodes (distributed replication) and we
>>>> would like to switch it to the distributed mode. I know the data is
>>>> duplicated between those nodes, what is the proper way of switching it to a
>>>> distributed, we would like to double or gain the storage space on our
>>>> gluster storage node. what happens with the data, do i need to erase one of
>>>> the nodes?
>>>>
>>>> Jose
>>>>
>>>>
>>>> ---------------------------------
>>>> Jose Sanchez
>>>> Systems/Network Analyst
>>>> Center of Advanced Research Computing
>>>> 1601 Central Ave.
>>>> MSC 01 1190
>>>> Albuquerque, NM 87131-0001
>>>> carc.unm.edu
>>>> 575.636.4232
>>>>
>>>>
>>>> _______________________________________________
>>>> Gluster-users mailing list
>>>> Gluster-users at gluster.org
>>>> http://lists.gluster.org/mailman/listinfo/gluster-users
>>>
>>>
>>>
>>
>>
>
>
>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://lists.gluster.org/mailman/listinfo/gluster-users
--
Regards,
Hari Gowtham.
More information about the Gluster-users
mailing list