[Gluster-users] Unable to Mount on Non-Server Machines
Andrew Kester
aikester at aikester.com
Wed Mar 15 00:01:20 UTC 2017
That seemed to be it, having 'auth.allow = all' lets all 3.9 clients in,
updating it to 'auth.allow = *' lets 3.10 clients connect as well.
Thanks,
Andrew Kester
The Storehouse
https://sthse.co
On 03/14/2017 12:03 AM, Atin Mukherjee wrote:
> "gluster volume set <volname> auth.allow all" looks to be the culprit.
> However I am just wondering if the same option is set for a volume in
> 3.9.1 how is it working for you. This is not a regression. I just tested
> it in both 3.10 & 3.9.1 and the mount doesn't succeed. Is there any
> specific reason you want to mark 'auth.allow = all' which actually is
> equivalent of having this option reset. auth.allow expects certain IPs
> which are allowed to be authenticated. When this option is set to 'all'
> Gluster doesn't handle this keyword specially and assume it's mentioned
> as one of the IP/Host & then the mount request fails with authentication
> failure.
>
> On Mon, Mar 13, 2017 at 9:10 PM, Atin Mukherjee <amukherj at redhat.com
> <mailto:amukherj at redhat.com>> wrote:
>
> Can you please mention the client version of the mount which you
> were unable to mount? Did you upgrade from 3.9 yo 3.10? Once I have
> these informations, I'll try to reproduce this issue and get back.
>
> On Fri, 10 Mar 2017 at 22:42, Andrew Kester <aikester at aikester.com
> <mailto:aikester at aikester.com>> wrote:
>
> I have a Gluster volume that I'm unable to mount from some
> clients. The client process on the servers are able to mount
> the volume without issue, but other clients are unable to. All
> nodes are running Debian 8 and Gluster 3.10.0.
>
> I see a couple lines in the log that have "Using Program
> GlusterFS 3.3", this is a pretty old volume definition but I've
> updated the operating mode as it's been upgraded, setting it to
> 31000 with this most recent update. Could that be the issue?
>
> Any help or guidance is appreciated. Thanks!
>
> glusterfs --version:
> glusterfs 3.10.0
> Repository revision: git://git.gluster.org/glusterfs.git
> <http://git.gluster.org/glusterfs.git>
> Copyright (c) 2006-2016 Red Hat, Inc. <https://www.gluster.org/>
> GlusterFS comes with ABSOLUTELY NO WARRANTY.
> It is licensed to you under your choice of the GNU Lesser
> General Public License, version 3 or any later version (LGPLv3
> or later), or the GNU General Public License, version 2 (GPLv2),
> in all cases as published by the Free Software Foundation.
>
> Volume Info:
> Volume Name: gv0
> Type: Replicate
> Volume ID: ----
> Status: Started
> Snapshot Count: 0
> Number of Bricks: 1 x 2 = 2
> Transport-type: tcp
> Bricks:
> Brick1: pegasus.sthse.co:/mnt/brick
> Brick2: atlantia.sthse.co:/mnt/brick
> Options Reconfigured:
> server.allow-insecure: on
> transport.address-family: inet
> nfs.disable: on
> server.root-squash: off
> auth.allow: all
> features.scrub-freq: weekly
> features.scrub-throttle: normal
> features.scrub: Active
> features.bitrot: on
> performance.io-thread-count: 16
>
> Log entries on clients:
> [2017-03-10 16:43:13.659555] I
> [rpc-clnt.c:1964:rpc_clnt_reconfig] 0-gv0-client-2: changing
> port to 49153 (from 0)
> [2017-03-10 16:43:13.659672] I [MSGID: 114057]
> [client-handshake.c:1451:select_server_supported_programs]
> 0-gv0-client-1: Using Program GlusterFS 3.3, Num (1298437),
> Version (330)
> [2017-03-10 16:43:13.660189] I [MSGID: 114057]
> [client-handshake.c:1451:select_server_supported_programs]
> 0-gv0-client-2: Using Program GlusterFS 3.3, Num (1298437),
> Version (330)
> [2017-03-10 16:43:13.660192] W [MSGID: 114043]
> [client-handshake.c:1105:client_setvolume_cbk] 0-gv0-client-1:
> failed to set the volume [Permission denied]
> [2017-03-10 16:43:13.660249] W [MSGID: 114007]
> [client-handshake.c:1134:client_setvolume_cbk] 0-gv0-client-1:
> failed to get 'process-uuid' from reply dict [Invalid argument]
> [2017-03-10 16:43:13.660266] E [MSGID: 114044]
> [client-handshake.c:1140:client_setvolume_cbk] 0-gv0-client-1:
> SETVOLUME on remote-host failed [Permission denied]
> [2017-03-10 16:43:13.660282] I [MSGID: 114049]
> [client-handshake.c:1243:client_setvolume_cbk] 0-gv0-client-1:
> sending AUTH_FAILED event
> [2017-03-10 16:43:13.660321] E [fuse-bridge.c:5322:notify]
> 0-fuse: Server authenication failed. Shutting down.
> [2017-03-10 16:43:13.660345] I [fuse-bridge.c:5802:fini] 0-fuse:
> Unmounting '/gv0'.
> [2017-03-10 16:43:13.660814] W [MSGID: 114043]
> [client-handshake.c:1105:client_setvolume_cbk] 0-gv0-client-2:
> failed to set the volume [Permission denied]
> [2017-03-10 16:43:13.660850] W [MSGID: 114007]
> [client-handshake.c:1134:client_setvolume_cbk] 0-gv0-client-2:
> failed to get 'process-uuid' from reply dict [Invalid argument]
> [2017-03-10 16:43:13.660869] E [MSGID: 114044]
> [client-handshake.c:1140:client_setvolume_cbk] 0-gv0-client-2:
> SETVOLUME on remote-host failed [Permission denied]
> [2017-03-10 16:43:13.660884] I [MSGID: 114049]
> [client-handshake.c:1243:client_setvolume_cbk] 0-gv0-client-2:
> sending AUTH_FAILED event
> [2017-03-10 16:43:13.673681] E [fuse-bridge.c:5322:notify]
> 0-fuse: Server authenication failed. Shutting down.
> [2017-03-10 16:43:13.673997] W
> [glusterfsd.c:1329:cleanup_and_exit]
> (-->/lib/x86_64-linux-gnu/libpthread.so.0(+0x8064)
> [0x7f81c866e064]
> -->/usr/sbin/glusterfs(glusterfs_sigwaiter+0xe5)
> [0x56191158cdb5] -->/usr/sbin/glusterfs(cleanup_and_exit+0x57)
> [0x56191158cc27] ) 0-: received signum (15), shutting down
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org <mailto:Gluster-users at gluster.org>
> http://lists.gluster.org/mailman/listinfo/gluster-users
> <http://lists.gluster.org/mailman/listinfo/gluster-users>
>
> --
> - Atin (atinm)
>
>
>
>
> --
>
> ~ Atin (atinm)
More information about the Gluster-users
mailing list