[Gluster-users] setfacl: Operation not supported

[Jiffin Tony Thottan]

Hi Evans,

Sorry for the delayed reply.

I tried to reproduce on my setup(version 3.7.9) and it was working fine 
for me.
But it was fairly reproducible with version which you had mentioned. I 
don't know
which patch got fixed that issue, still I suggest to update your gluster 
so that both
issues mentioned below will be solved

On 24/06/16 23:43, Evans, Kyle wrote:
>
> Hi Jiffin,
>
>
> Thanks for the help.  You understand correctly, I am talking about the 
> client.  The problem is intermittent, and those lines DO appear in the 
> log when it works but DO NOT appear in the log when it is broken. 
>  Also, here is another log I am getting that may be relevant:
>
>
> [2016-06-13 17:39:33.128941] I [dict.c:473:dict_get] 
> (-->/usr/lib64/glusterfs/3.7.5/xlator/system/posix-acl.so(posix_acl_setxattr_cbk+0x26) 
> [0x7effdbdfb3a6] 
> -->/usr/lib64/glusterfs/3.7.5/xlator/system/posix-acl.so(handling_other_acl_related_xattr+0x22) 
> [0x7effdbdfb2a2] -->/lib64/libglusterfs.so.0(dict_get+0xac) 
> [0x7effef3e80cc] ) 0-dict: !this || key=system.posix_acl_access 
> [Invalid argument]
>
>

Ignore this , this is spurious message which was fixed by this patch 
http://review.gluster.org/#/c/13452/

--

Regards
>
>
> Thanks,
>
>
> Kyle
>
>
> From: Jiffin Tony Thottan
> Date: Friday, June 24, 2016 at 2:17 AM
> To: Kyle Evans, "gluster-users at gluster.org 
> <mailto:gluster-users at gluster.org>"
> Subject: Re: [Gluster-users] setfacl: Operation not supported
>
>
>
> On 24/06/16 02:08, Evans, Kyle wrote:
>> I'm using gluster 3.7.5-19 on RHEL 7.2  Gluster periodically stops 
>> allowing ACLs.  I have it configured in fstab like this:
>>
>> Server.example.com:/dir /mnt glusterfs defaults,_netdev,acl 0 0
>>
>>
>> Also, the bricks are XFS.
>>
>> It usually works fine, but sometimes after a reboot, one of the nodes 
>> won't allow acl operations like setfacl and getfacl.  They give the 
>> error "Operation not supported".
>>
> Did u meant client reboot ?
>
> Correct me if I am wrong,
>
> You have mounted the glusterfs volume with acl enabled and configured 
> in fstab
>
> When you reboot client, acl operations are returning error as 
> "Operation not supported".
>
> Can please follow the steps if possible
> after mounting can check the client log (in your example it should be 
> /var/log/glusterfs/mnt.log)
> and confirm whether following block is present in the vol graph
> "volume posix-acl-autoload
>         type system/posix-acl
>         subvolumes dir
> end-volume"
>
> Clear the log file before reboot and just check whether same block is 
> present after reboot
>
> --
> Jiffin
>
>> Sometimes it's not even after a reboot; it just stops supporting it.
>>
>> If I unmount and remount, it starts working again.  Does anybody have 
>> any insight?
>>
>> Thanks,
>>
>> Kyle
>>
>>
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.orghttp://www.gluster.org/mailman/listinfo/gluster-users
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20160628/274093cd/attachment.html>