[Gluster-users] [Gluster-devel] GlusterFS FUSE client hangs on rsyncing lots of file

Pranith Kumar Karampuri pkarampu at redhat.com
Wed Jan 27 08:35:47 UTC 2016 

Hi,
       If the hang appears on enabling client side io-threads then it 
could be because of some race that is seen when io-threads is enabled on 
the client side. 2 things will help us debug this issue:
1) thread apply all bt inside gdb (with debuginfo rpms/debs installed )
2) Complete statedump of the mount at two intervals preferably 10 
seconds apart. It becomes difficult to find out which ones are stuck vs 
the ones that are on-going when we have just one statedump. If we have 
two, we can find which frames are common in both of the statedumps and 
then take a closer look there.

Feel free to ping me on #gluster-dev, nick: pranithk if you have the 
process hung in that state and you guys don't mind me do a live 
debugging with you guys. This option is the best of the lot!

Thanks a lot baul, Oleksandr for the debugging so far!

Pranith

On 01/25/2016 01:03 PM, baul jianguo wrote:
> 3.5.7 also hangs.only the flush op hung. Yes,off the
> performance.client-io-threads ,no hang.
>
> The hang does not relate the client kernel version.
>
> One client statdump about flush op,any abnormal?
>
> [global.callpool.stack.12]
>
> uid=0
>
> gid=0
>
> pid=14432
>
> unique=16336007098
>
> lk-owner=77cb199aa36f3641
>
> op=FLUSH
>
> type=1
>
> cnt=6
>
>
>
> [global.callpool.stack.12.frame.1]
>
> ref_count=1
>
> translator=fuse
>
> complete=0
>
>
>
> [global.callpool.stack.12.frame.2]
>
> ref_count=0
>
> translator=datavolume-write-behind
>
> complete=0
>
> parent=datavolume-read-ahead
>
> wind_from=ra_flush
>
> wind_to=FIRST_CHILD (this)->fops->flush
>
> unwind_to=ra_flush_cbk
>
>
>
> [global.callpool.stack.12.frame.3]
>
> ref_count=1
>
> translator=datavolume-read-ahead
>
> complete=0
>
> parent=datavolume-open-behind
>
> wind_from=default_flush_resume
>
> wind_to=FIRST_CHILD(this)->fops->flush
>
> unwind_to=default_flush_cbk
>
>
>
> [global.callpool.stack.12.frame.4]
>
> ref_count=1
>
> translator=datavolume-open-behind
>
> complete=0
>
> parent=datavolume-io-threads
>
> wind_from=iot_flush_wrapper
>
> wind_to=FIRST_CHILD(this)->fops->flush
>
> unwind_to=iot_flush_cbk
>
>
>
> [global.callpool.stack.12.frame.5]
>
> ref_count=1
>
> translator=datavolume-io-threads
>
> complete=0
>
> parent=datavolume
>
> wind_from=io_stats_flush
>
> wind_to=FIRST_CHILD(this)->fops->flush
>
> unwind_to=io_stats_flush_cbk
>
>
>
> [global.callpool.stack.12.frame.6]
>
> ref_count=1
>
> translator=datavolume
>
> complete=0
>
> parent=fuse
>
> wind_from=fuse_flush_resume
>
> wind_to=xl->fops->flush
>
> unwind_to=fuse_err_cbk
>
>
>
> On Sun, Jan 24, 2016 at 5:35 AM, Oleksandr Natalenko
> <oleksandr at natalenko.name> wrote:
>> With "performance.client-io-threads" set to "off" no hangs occurred in 3
>> rsync/rm rounds. Could that be some fuse-bridge lock race? Will bring that
>> option to "on" back again and try to get full statedump.
>>
>> On четвер, 21 січня 2016 р. 14:54:47 EET Raghavendra G wrote:
>>> On Thu, Jan 21, 2016 at 10:49 AM, Pranith Kumar Karampuri <
>>>
>>> pkarampu at redhat.com> wrote:
>>>> On 01/18/2016 02:28 PM, Oleksandr Natalenko wrote:
>>>>> XFS. Server side works OK, I'm able to mount volume again. Brick is 30%
>>>>> full.
>>>> Oleksandr,
>>>>
>>>>        Will it be possible to get the statedump of the client, bricks
>>>>
>>>> output next time it happens?
>>>>
>>>> https://github.com/gluster/glusterfs/blob/master/doc/debugging/statedump.m
>>>> d#how-to-generate-statedump
>>> We also need to dump inode information. To do that you've to add "all=yes"
>>> to /var/run/gluster/glusterdump.options before you issue commands to get
>>> statedump.
>>>
>>>> Pranith
>>>>
>>>>> On понеділок, 18 січня 2016 р. 15:07:18 EET baul jianguo wrote:
>>>>>> What is your brick file system? and the glusterfsd process and all
>>>>>> thread status?
>>>>>> I met same issue when client app such as rsync stay in D status,and
>>>>>> the brick process and relate thread also be in the D status.
>>>>>> And the brick dev disk util is 100% .
>>>>>>
>>>>>> On Sun, Jan 17, 2016 at 6:13 AM, Oleksandr Natalenko
>>>>>>
>>>>>> <oleksandr at natalenko.name> wrote:
>>>>>>> Wrong assumption, rsync hung again.
>>>>>>>
>>>>>>> On субота, 16 січня 2016 р. 22:53:04 EET Oleksandr Natalenko wrote:
>>>>>>>> One possible reason:
>>>>>>>>
>>>>>>>> cluster.lookup-optimize: on
>>>>>>>> cluster.readdir-optimize: on
>>>>>>>>
>>>>>>>> I've disabled both optimizations, and at least as of now rsync still
>>>>>>>> does
>>>>>>>> its job with no issues. I would like to find out what option causes
>>>>>>>> such
>>>>>>>> a
>>>>>>>> behavior and why. Will test more.
>>>>>>>>
>>>>>>>> On пʼятниця, 15 січня 2016 р. 16:09:51 EET Oleksandr Natalenko wrote:
>>>>>>>>> Another observation: if rsyncing is resumed after hang, rsync itself
>>>>>>>>> hangs a lot faster because it does stat of already copied files. So,
>>>>>>>>> the
>>>>>>>>> reason may be not writing itself, but massive stat on GlusterFS
>>>>>>>>> volume
>>>>>>>>> as well.
>>>>>>>>>
>>>>>>>>> 15.01.2016 09:40, Oleksandr Natalenko написав:
>>>>>>>>>> While doing rsync over millions of files from ordinary partition to
>>>>>>>>>> GlusterFS volume, just after approx. first 2 million rsync hang
>>>>>>>>>> happens, and the following info appears in dmesg:
>>>>>>>>>>
>>>>>>>>>> ===
>>>>>>>>>> [17075038.924481] INFO: task rsync:10310 blocked for more than 120
>>>>>>>>>> seconds.
>>>>>>>>>> [17075038.931948] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
>>>>>>>>>> disables this message.
>>>>>>>>>> [17075038.940748] rsync           D ffff88207fc13680     0 10310
>>>>>>>>>> 10309 0x00000080
>>>>>>>>>> [17075038.940752]  ffff8809c578be18 0000000000000086
>>>>>>>>>> ffff8809c578bfd8
>>>>>>>>>> 0000000000013680
>>>>>>>>>> [17075038.940756]  ffff8809c578bfd8 0000000000013680
>>>>>>>>>> ffff880310cbe660
>>>>>>>>>> ffff881159d16a30
>>>>>>>>>> [17075038.940759]  ffff881e3aa25800 ffff8809c578be48
>>>>>>>>>> ffff881159d16b10
>>>>>>>>>> ffff88087d553980
>>>>>>>>>> [17075038.940762] Call Trace:
>>>>>>>>>> [17075038.940770]  [<ffffffff8160a1d9>] schedule+0x29/0x70
>>>>>>>>>> [17075038.940797]  [<ffffffffa023a53d>]
>>>>>>>>>> __fuse_request_send+0x13d/0x2c0
>>>>>>>>>> [fuse]
>>>>>>>>>> [17075038.940801]  [<ffffffffa023db30>] ?
>>>>>>>>>> fuse_get_req_nofail_nopages+0xc0/0x1e0 [fuse]
>>>>>>>>>> [17075038.940805]  [<ffffffff81098350>] ? wake_up_bit+0x30/0x30
>>>>>>>>>> [17075038.940809]  [<ffffffffa023a6d2>] fuse_request_send+0x12/0x20
>>>>>>>>>> [fuse]
>>>>>>>>>> [17075038.940813]  [<ffffffffa024382f>] fuse_flush+0xff/0x150 [fuse]
>>>>>>>>>> [17075038.940817]  [<ffffffff811c45c4>] filp_close+0x34/0x80
>>>>>>>>>> [17075038.940821]  [<ffffffff811e4ed8>] __close_fd+0x78/0xa0
>>>>>>>>>> [17075038.940824]  [<ffffffff811c6103>] SyS_close+0x23/0x50
>>>>>>>>>> [17075038.940828]  [<ffffffff81614de9>]
>>>>>>>>>> system_call_fastpath+0x16/0x1b
>>>>>>>>>> ===
>>>>>>>>>>
>>>>>>>>>> rsync blocks in D state, and to kill it, I have to do umount --lazy
>>>>>>>>>> on
>>>>>>>>>> GlusterFS mountpoint, and then kill corresponding client glusterfs
>>>>>>>>>> process. Then rsync exits.
>>>>>>>>>>
>>>>>>>>>> Here is GlusterFS volume info:
>>>>>>>>>>
>>>>>>>>>> ===
>>>>>>>>>> Volume Name: asterisk_records
>>>>>>>>>> Type: Distributed-Replicate
>>>>>>>>>> Volume ID: dc1fe561-fa3a-4f2e-8330-ec7e52c75ba4
>>>>>>>>>> Status: Started
>>>>>>>>>> Number of Bricks: 3 x 2 = 6
>>>>>>>>>> Transport-type: tcp
>>>>>>>>>> Bricks:
>>>>>>>>>> Brick1:
>>>>>>>>>> server1:/bricks/10_megaraid_0_3_9_x_0_4_3_hdd_r1_nolvm_hdd_storage_0
>>>>>>>>>> 1
>>>>>>>>>> /as
>>>>>>>>>> te
>>>>>>>>>> risk/records Brick2:
>>>>>>>>>> server2:/bricks/10_megaraid_8_5_14_x_8_6_16_hdd_r1_nolvm_hdd_storage
>>>>>>>>>> _
>>>>>>>>>> 01/
>>>>>>>>>> as
>>>>>>>>>> terisk/records Brick3:
>>>>>>>>>> server1:/bricks/11_megaraid_0_5_4_x_0_6_5_hdd_r1_nolvm_hdd_storage_0
>>>>>>>>>> 2
>>>>>>>>>> /as
>>>>>>>>>> te
>>>>>>>>>> risk/records Brick4:
>>>>>>>>>> server2:/bricks/11_megaraid_8_7_15_x_8_8_20_hdd_r1_nolvm_hdd_storage
>>>>>>>>>> _
>>>>>>>>>> 02/
>>>>>>>>>> as
>>>>>>>>>> terisk/records Brick5:
>>>>>>>>>> server1:/bricks/12_megaraid_0_7_6_x_0_13_14_hdd_r1_nolvm_hdd_storage
>>>>>>>>>> _
>>>>>>>>>> 03/
>>>>>>>>>> as
>>>>>>>>>> terisk/records Brick6:
>>>>>>>>>> server2:/bricks/12_megaraid_8_9_19_x_8_13_24_hdd_r1_nolvm_hdd_storag
>>>>>>>>>> e
>>>>>>>>>> _03
>>>>>>>>>> /a
>>>>>>>>>> sterisk/records Options Reconfigured:
>>>>>>>>>> cluster.lookup-optimize: on
>>>>>>>>>> cluster.readdir-optimize: on
>>>>>>>>>> client.event-threads: 2
>>>>>>>>>> network.inode-lru-limit: 4096
>>>>>>>>>> server.event-threads: 4
>>>>>>>>>> performance.client-io-threads: on
>>>>>>>>>> storage.linux-aio: on
>>>>>>>>>> performance.write-behind-window-size: 4194304
>>>>>>>>>> performance.stat-prefetch: on
>>>>>>>>>> performance.quick-read: on
>>>>>>>>>> performance.read-ahead: on
>>>>>>>>>> performance.flush-behind: on
>>>>>>>>>> performance.write-behind: on
>>>>>>>>>> performance.io-thread-count: 2
>>>>>>>>>> performance.cache-max-file-size: 1048576
>>>>>>>>>> performance.cache-size: 33554432
>>>>>>>>>> features.cache-invalidation: on
>>>>>>>>>> performance.readdir-ahead: on
>>>>>>>>>> ===
>>>>>>>>>>
>>>>>>>>>> The issue reproduces each time I rsync such an amount of files.
>>>>>>>>>>
>>>>>>>>>> How could I debug this issue better?
>>>>>>>>>> _______________________________________________
>>>>>>>>>> Gluster-users mailing list
>>>>>>>>>> Gluster-users at gluster.org
>>>>>>>>>> http://www.gluster.org/mailman/listinfo/gluster-users
>>>>>>>>> _______________________________________________
>>>>>>>>> Gluster-devel mailing list
>>>>>>>>> Gluster-devel at gluster.org
>>>>>>>>> http://www.gluster.org/mailman/listinfo/gluster-devel
>>>>>>>> _______________________________________________
>>>>>>>> Gluster-devel mailing list
>>>>>>>> Gluster-devel at gluster.org
>>>>>>>> http://www.gluster.org/mailman/listinfo/gluster-devel
>>>>>>> _______________________________________________
>>>>>>> Gluster-devel mailing list
>>>>>>> Gluster-devel at gluster.org
>>>>>>> http://www.gluster.org/mailman/listinfo/gluster-devel
>>>>> _______________________________________________
>>>>> Gluster-users mailing list
>>>>> Gluster-users at gluster.org
>>>>> http://www.gluster.org/mailman/listinfo/gluster-users
>>>> _______________________________________________
>>>> Gluster-devel mailing list
>>>> Gluster-devel at gluster.org
>>>> http://www.gluster.org/mailman/listinfo/gluster-devel
>>

More information about the Gluster-users mailing list