[Gluster-users] [Gluster-devel] heal hanging
David Robinson
david.robinson at corvidtec.com
Mon Jan 25 17:40:17 UTC 2016
It is doing it again... statedump from gfs02a is attached...
------ Original Message ------
From: "Pranith Kumar Karampuri" <pkarampu at redhat.com>
To: "Glomski, Patrick" <patrick.glomski at corvidtec.com>
Cc: "David Robinson" <drobinson at corvidtec.com>;
"gluster-users at gluster.org" <gluster-users at gluster.org>; "Gluster Devel"
<gluster-devel at gluster.org>
Sent: 1/24/2016 9:27:02 PM
Subject: Re: [Gluster-users] [Gluster-devel] heal hanging
>It seems like there is a lot of finodelk/inodelk traffic. I wonder why
>that is. I think the next steps is to collect statedump of the brick
>which is taking lot of CPU, using "gluster volume statedump <volname>"
>
>Pranith
>On 01/22/2016 08:36 AM, Glomski, Patrick wrote:
>>Pranith, attached are stack traces collected every second for 20
>>seconds from the high-%cpu glusterfsd process.
>>
>>Patrick
>>
>>On Thu, Jan 21, 2016 at 9:46 PM, Glomski, Patrick
>><patrick.glomski at corvidtec.com> wrote:
>>>Last entry for get_real_filename on any of the bricks was when we
>>>turned off the samba gfapi vfs plugin earlier today:
>>>
>>>/var/log/glusterfs/bricks/data-brick01a-homegfs.log:[2016-01-21
>>>15:13:00.008239] E [server-rpc-fops.c:768:server_getxattr_cbk]
>>>0-homegfs-server: 105: GETXATTR /wks_backup
>>>(40e582d6-b0c7-4099-ba88-9168a3c32ca6)
>>>(glusterfs.get_real_filename:desktop.ini) ==> (Permission denied)
>>>
>>>We'll get back to you with those traces when %cpu spikes again. As
>>>with most sporadic problems, as soon as you want something out of it,
>>>the issue becomes harder to reproduce.
>>>
>>>
>>>On Thu, Jan 21, 2016 at 9:21 PM, Pranith Kumar Karampuri
>>><pkarampu at redhat.com> wrote:
>>>>
>>>>
>>>>On 01/22/2016 07:25 AM, Glomski, Patrick wrote:
>>>>>Unfortunately, all samba mounts to the gluster volume through the
>>>>>gfapi vfs plugin have been disabled for the last 6 hours or so and
>>>>>frequency of %cpu spikes is increased. We had switched to sharing a
>>>>>fuse mount through samba, but I just disabled that as well. There
>>>>>are no samba shares of this volume now. The spikes now happen every
>>>>>thirty minutes or so. We've resorted to just rebooting the machine
>>>>>with high load for the present.
>>>>
>>>>Could you see if the logs of following type are not at all coming?
>>>>[2016-01-21 15:13:00.005736] E
>>>>[server-rpc-fops.c:768:server_getxattr_cbk] 0-homegfs-server: 110:
>>>>GETXATTR /wks_backup (40e582d6-b0c7-4099-ba88-9168a3c
>>>>32ca6) (glusterfs.get_real_filename:desktop.ini) ==> (Permission
>>>>denied)
>>>>
>>>>These are operations that failed. Operations that succeed are the
>>>>ones that will scan the directory. But I don't have a way to find
>>>>them other than using tcpdumps.
>>>>
>>>>At the moment I have 2 theories:
>>>>1) these get_real_filename calls
>>>>2) [2016-01-21 16:10:38.017828] E [server-helpers.c:46:gid_resolve]
>>>>0-gid-cache: getpwuid_r(494) failed
>>>>"
>>>>Yessir they are. Normally, sssd would look to the local cache file
>>>>in /var/lib/sss/db/ first, to get any group or userid information,
>>>>then go out to the domain controller. I put the options that we are
>>>>using on our GFS volumes below… Thanks for your help.
>>>>
>>>>
>>>>
>>>>We had been running sssd with sssd_nss and sssd_be sub-processes on
>>>>these systems for a long time, under the GFS 3.5.2 code, and not run
>>>>into the problem that David described with the high cpu usage on
>>>>sssd_nss.
>>>>
>>>>"
>>>>That was Tom Young's email 1.5 years back when we debugged it. But
>>>>the process which was consuming lot of cpu is sssd_nss. So I am not
>>>>sure if it is same issue. Let us debug to see '1)' doesn't happen.
>>>>The gstack traces I asked for should also help.
>>>>
>>>>
>>>>Pranith
>>>>>
>>>>>On Thu, Jan 21, 2016 at 8:49 PM, Pranith Kumar Karampuri
>>>>><pkarampu at redhat.com> wrote:
>>>>>>
>>>>>>
>>>>>>On 01/22/2016 07:13 AM, Glomski, Patrick wrote:
>>>>>>>We use the samba glusterfs virtual filesystem (the current
>>>>>>>version provided on download.gluster.org), but no windows clients
>>>>>>>connecting directly.
>>>>>>
>>>>>>Hmm.. Is there a way to disable using this and check if the CPU%
>>>>>>still increases? What getxattr of "glusterfs.get_real_filename
>>>>>><filanme>" does is to scan the entire directory looking for
>>>>>>strcasecmp(<filname>, <scanned-filename>). If anything matches
>>>>>>then it will return the <scanned-filename>. But the problem is the
>>>>>>scan is costly. So I wonder if this is the reason for the CPU
>>>>>>spikes.
>>>>>>
>>>>>>Pranith
>>>>>>
>>>>>>>
>>>>>>>On Thu, Jan 21, 2016 at 8:37 PM, Pranith Kumar Karampuri
>>>>>>><pkarampu at redhat.com> wrote:
>>>>>>>>Do you have any windows clients? I see a lot of getxattr calls
>>>>>>>>for "glusterfs.get_real_filename" which lead to full readdirs of
>>>>>>>>the directories on the brick.
>>>>>>>>
>>>>>>>>Pranith
>>>>>>>>
>>>>>>>>On 01/22/2016 12:51 AM, Glomski, Patrick wrote:
>>>>>>>>>Pranith, could this kind of behavior be self-inflicted by us
>>>>>>>>>deleting files directly from the bricks? We have done that in
>>>>>>>>>the past to clean up an issues where gluster wouldn't allow us
>>>>>>>>>to delete from the mount.
>>>>>>>>>
>>>>>>>>>If so, is it feasible to clean them up by running a search on
>>>>>>>>>the .glusterfs directories directly and removing files with a
>>>>>>>>>reference count of 1 that are non-zero size (or directly
>>>>>>>>>checking the xattrs to be sure that it's not a DHT link).
>>>>>>>>>
>>>>>>>>>find /data/brick01a/homegfs/.glusterfs -type f -not -empty
>>>>>>>>>-links -2 -exec rm -f "{}" \;
>>>>>>>>>
>>>>>>>>>Is there anything I'm inherently missing with that approach
>>>>>>>>>that will further corrupt the system?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>On Thu, Jan 21, 2016 at 1:02 PM, Glomski, Patrick
>>>>>>>>><patrick.glomski at corvidtec.com> wrote:
>>>>>>>>>>Load spiked again: ~1200%cpu on gfs02a for glusterfsd. Crawl
>>>>>>>>>>has been running on one of the bricks on gfs02b for 25 min or
>>>>>>>>>>so and users cannot access the volume.
>>>>>>>>>>
>>>>>>>>>>I re-listed the xattrop directories as well as a 'top' entry
>>>>>>>>>>and heal statistics. Then I restarted the gluster services on
>>>>>>>>>>gfs02a.
>>>>>>>>>>
>>>>>>>>>>=================== top ===================
>>>>>>>>>>PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+
>>>>>>>>>>COMMAND
>>>>>>>>>> 8969 root 20 0 2815m 204m 3588 S 1181.0 0.6 591:06.93
>>>>>>>>>>glusterfsd
>>>>>>>>>>
>>>>>>>>>>=================== xattrop ===================
>>>>>>>>>>/data/brick01a/homegfs/.glusterfs/indices/xattrop:
>>>>>>>>>>xattrop-41f19453-91e4-437c-afa9-3b25614de210
>>>>>>>>>>xattrop-9b815879-2f4d-402b-867c-a6d65087788c
>>>>>>>>>>
>>>>>>>>>>/data/brick02a/homegfs/.glusterfs/indices/xattrop:
>>>>>>>>>>xattrop-70131855-3cfb-49af-abce-9d23f57fb393
>>>>>>>>>>xattrop-dfb77848-a39d-4417-a725-9beca75d78c6
>>>>>>>>>>
>>>>>>>>>>/data/brick01b/homegfs/.glusterfs/indices/xattrop:
>>>>>>>>>>e6e47ed9-309b-42a7-8c44-28c29b9a20f8
>>>>>>>>>>xattrop-5c797a64-bde7-4eac-b4fc-0befc632e125
>>>>>>>>>>xattrop-38ec65a1-00b5-4544-8a6c-bf0f531a1934
>>>>>>>>>>xattrop-ef0980ad-f074-4163-979f-16d5ef85b0a0
>>>>>>>>>>
>>>>>>>>>>/data/brick02b/homegfs/.glusterfs/indices/xattrop:
>>>>>>>>>>xattrop-7402438d-0ee7-4fcf-b9bb-b561236f99bc
>>>>>>>>>>xattrop-8ffbf5f7-ace3-497d-944e-93ac85241413
>>>>>>>>>>
>>>>>>>>>>/data/brick01a/homegfs/.glusterfs/indices/xattrop:
>>>>>>>>>>xattrop-0115acd0-caae-4dfd-b3b4-7cc42a0ff531
>>>>>>>>>>
>>>>>>>>>>/data/brick02a/homegfs/.glusterfs/indices/xattrop:
>>>>>>>>>>xattrop-7e20fdb1-5224-4b9a-be06-568708526d70
>>>>>>>>>>
>>>>>>>>>>/data/brick01b/homegfs/.glusterfs/indices/xattrop:
>>>>>>>>>>8034bc06-92cd-4fa5-8aaf-09039e79d2c8
>>>>>>>>>>c9ce22ed-6d8b-471b-a111-b39e57f0b512
>>>>>>>>>>94fa1d60-45ad-4341-b69c-315936b51e8d
>>>>>>>>>>xattrop-9c04623a-64ce-4f66-8b23-dbaba49119c7
>>>>>>>>>>
>>>>>>>>>>/data/brick02b/homegfs/.glusterfs/indices/xattrop:
>>>>>>>>>>xattrop-b8c8f024-d038-49a2-9a53-c54ead09111d
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>=================== heal stats ===================
>>>>>>>>>>
>>>>>>>>>>homegfs [b0-gfsib01a] : Starting time of crawl : Thu Jan
>>>>>>>>>>21 12:36:45 2016
>>>>>>>>>>homegfs [b0-gfsib01a] : Ending time of crawl : Thu Jan
>>>>>>>>>>21 12:36:45 2016
>>>>>>>>>>homegfs [b0-gfsib01a] : Type of crawl: INDEX
>>>>>>>>>>homegfs [b0-gfsib01a] : No. of entries healed : 0
>>>>>>>>>>homegfs [b0-gfsib01a] : No. of entries in split-brain: 0
>>>>>>>>>>homegfs [b0-gfsib01a] : No. of heal failed entries : 0
>>>>>>>>>>
>>>>>>>>>>homegfs [b1-gfsib01b] : Starting time of crawl : Thu Jan
>>>>>>>>>>21 12:36:19 2016
>>>>>>>>>>homegfs [b1-gfsib01b] : Ending time of crawl : Thu Jan
>>>>>>>>>>21 12:36:19 2016
>>>>>>>>>>homegfs [b1-gfsib01b] : Type of crawl: INDEX
>>>>>>>>>>homegfs [b1-gfsib01b] : No. of entries healed : 0
>>>>>>>>>>homegfs [b1-gfsib01b] : No. of entries in split-brain: 0
>>>>>>>>>>homegfs [b1-gfsib01b] : No. of heal failed entries : 1
>>>>>>>>>>
>>>>>>>>>>homegfs [b2-gfsib01a] : Starting time of crawl : Thu Jan
>>>>>>>>>>21 12:36:48 2016
>>>>>>>>>>homegfs [b2-gfsib01a] : Ending time of crawl : Thu Jan
>>>>>>>>>>21 12:36:48 2016
>>>>>>>>>>homegfs [b2-gfsib01a] : Type of crawl: INDEX
>>>>>>>>>>homegfs [b2-gfsib01a] : No. of entries healed : 0
>>>>>>>>>>homegfs [b2-gfsib01a] : No. of entries in split-brain: 0
>>>>>>>>>>homegfs [b2-gfsib01a] : No. of heal failed entries : 0
>>>>>>>>>>
>>>>>>>>>>homegfs [b3-gfsib01b] : Starting time of crawl : Thu Jan
>>>>>>>>>>21 12:36:47 2016
>>>>>>>>>>homegfs [b3-gfsib01b] : Ending time of crawl : Thu Jan
>>>>>>>>>>21 12:36:47 2016
>>>>>>>>>>homegfs [b3-gfsib01b] : Type of crawl: INDEX
>>>>>>>>>>homegfs [b3-gfsib01b] : No. of entries healed : 0
>>>>>>>>>>homegfs [b3-gfsib01b] : No. of entries in split-brain: 0
>>>>>>>>>>homegfs [b3-gfsib01b] : No. of heal failed entries : 0
>>>>>>>>>>
>>>>>>>>>>homegfs [b4-gfsib02a] : Starting time of crawl : Thu Jan
>>>>>>>>>>21 12:36:06 2016
>>>>>>>>>>homegfs [b4-gfsib02a] : Ending time of crawl : Thu Jan
>>>>>>>>>>21 12:36:06 2016
>>>>>>>>>>homegfs [b4-gfsib02a] : Type of crawl: INDEX
>>>>>>>>>>homegfs [b4-gfsib02a] : No. of entries healed : 0
>>>>>>>>>>homegfs [b4-gfsib02a] : No. of entries in split-brain: 0
>>>>>>>>>>homegfs [b4-gfsib02a] : No. of heal failed entries : 0
>>>>>>>>>>
>>>>>>>>>>homegfs [b5-gfsib02b] : Starting time of crawl : Thu Jan
>>>>>>>>>>21 12:13:40 2016
>>>>>>>>>>homegfs [b5-gfsib02b] : ***
>>>>>>>>>>Crawl is in progress ***
>>>>>>>>>>homegfs [b5-gfsib02b] : Type of crawl: INDEX
>>>>>>>>>>homegfs [b5-gfsib02b] : No. of entries healed : 0
>>>>>>>>>>homegfs [b5-gfsib02b] : No. of entries in split-brain: 0
>>>>>>>>>>homegfs [b5-gfsib02b] : No. of heal failed entries : 0
>>>>>>>>>>
>>>>>>>>>>homegfs [b6-gfsib02a] : Starting time of crawl : Thu Jan
>>>>>>>>>>21 12:36:58 2016
>>>>>>>>>>homegfs [b6-gfsib02a] : Ending time of crawl : Thu Jan
>>>>>>>>>>21 12:36:58 2016
>>>>>>>>>>homegfs [b6-gfsib02a] : Type of crawl: INDEX
>>>>>>>>>>homegfs [b6-gfsib02a] : No. of entries healed : 0
>>>>>>>>>>homegfs [b6-gfsib02a] : No. of entries in split-brain: 0
>>>>>>>>>>homegfs [b6-gfsib02a] : No. of heal failed entries : 0
>>>>>>>>>>
>>>>>>>>>>homegfs [b7-gfsib02b] : Starting time of crawl : Thu Jan
>>>>>>>>>>21 12:36:50 2016
>>>>>>>>>>homegfs [b7-gfsib02b] : Ending time of crawl : Thu Jan
>>>>>>>>>>21 12:36:50 2016
>>>>>>>>>>homegfs [b7-gfsib02b] : Type of crawl: INDEX
>>>>>>>>>>homegfs [b7-gfsib02b] : No. of entries healed : 0
>>>>>>>>>>homegfs [b7-gfsib02b] : No. of entries in split-brain: 0
>>>>>>>>>>homegfs [b7-gfsib02b] : No. of heal failed entries : 0
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>========================================================================================
>>>>>>>>>>I waited a few minutes for the heals to finish and ran the
>>>>>>>>>>heal statistics and info again. one file is in split-brain.
>>>>>>>>>>Aside from the split-brain, the load on all systems is down
>>>>>>>>>>now and they are behaving normally. glustershd.log is
>>>>>>>>>>attached. What is going on???
>>>>>>>>>>
>>>>>>>>>>Thu Jan 21 12:53:50 EST 2016
>>>>>>>>>>
>>>>>>>>>>=================== homegfs ===================
>>>>>>>>>>
>>>>>>>>>>homegfs [b0-gfsib01a] : Starting time of crawl : Thu Jan
>>>>>>>>>>21 12:53:02 2016
>>>>>>>>>>homegfs [b0-gfsib01a] : Ending time of crawl : Thu Jan
>>>>>>>>>>21 12:53:02 2016
>>>>>>>>>>homegfs [b0-gfsib01a] : Type of crawl: INDEX
>>>>>>>>>>homegfs [b0-gfsib01a] : No. of entries healed : 0
>>>>>>>>>>homegfs [b0-gfsib01a] : No. of entries in split-brain: 0
>>>>>>>>>>homegfs [b0-gfsib01a] : No. of heal failed entries : 0
>>>>>>>>>>
>>>>>>>>>>homegfs [b1-gfsib01b] : Starting time of crawl : Thu Jan
>>>>>>>>>>21 12:53:38 2016
>>>>>>>>>>homegfs [b1-gfsib01b] : Ending time of crawl : Thu Jan
>>>>>>>>>>21 12:53:38 2016
>>>>>>>>>>homegfs [b1-gfsib01b] : Type of crawl: INDEX
>>>>>>>>>>homegfs [b1-gfsib01b] : No. of entries healed : 0
>>>>>>>>>>homegfs [b1-gfsib01b] : No. of entries in split-brain: 0
>>>>>>>>>>homegfs [b1-gfsib01b] : No. of heal failed entries : 1
>>>>>>>>>>
>>>>>>>>>>homegfs [b2-gfsib01a] : Starting time of crawl : Thu Jan
>>>>>>>>>>21 12:53:04 2016
>>>>>>>>>>homegfs [b2-gfsib01a] : Ending time of crawl : Thu Jan
>>>>>>>>>>21 12:53:04 2016
>>>>>>>>>>homegfs [b2-gfsib01a] : Type of crawl: INDEX
>>>>>>>>>>homegfs [b2-gfsib01a] : No. of entries healed : 0
>>>>>>>>>>homegfs [b2-gfsib01a] : No. of entries in split-brain: 0
>>>>>>>>>>homegfs [b2-gfsib01a] : No. of heal failed entries : 0
>>>>>>>>>>
>>>>>>>>>>homegfs [b3-gfsib01b] : Starting time of crawl : Thu Jan
>>>>>>>>>>21 12:53:04 2016
>>>>>>>>>>homegfs [b3-gfsib01b] : Ending time of crawl : Thu Jan
>>>>>>>>>>21 12:53:04 2016
>>>>>>>>>>homegfs [b3-gfsib01b] : Type of crawl: INDEX
>>>>>>>>>>homegfs [b3-gfsib01b] : No. of entries healed : 0
>>>>>>>>>>homegfs [b3-gfsib01b] : No. of entries in split-brain: 0
>>>>>>>>>>homegfs [b3-gfsib01b] : No. of heal failed entries : 0
>>>>>>>>>>
>>>>>>>>>>homegfs [b4-gfsib02a] : Starting time of crawl : Thu Jan
>>>>>>>>>>21 12:53:33 2016
>>>>>>>>>>homegfs [b4-gfsib02a] : Ending time of crawl : Thu Jan
>>>>>>>>>>21 12:53:33 2016
>>>>>>>>>>homegfs [b4-gfsib02a] : Type of crawl: INDEX
>>>>>>>>>>homegfs [b4-gfsib02a] : No. of entries healed : 0
>>>>>>>>>>homegfs [b4-gfsib02a] : No. of entries in split-brain: 0
>>>>>>>>>>homegfs [b4-gfsib02a] : No. of heal failed entries : 1
>>>>>>>>>>
>>>>>>>>>>homegfs [b5-gfsib02b] : Starting time of crawl : Thu Jan
>>>>>>>>>>21 12:53:14 2016
>>>>>>>>>>homegfs [b5-gfsib02b] : Ending time of crawl : Thu Jan
>>>>>>>>>>21 12:53:15 2016
>>>>>>>>>>homegfs [b5-gfsib02b] : Type of crawl: INDEX
>>>>>>>>>>homegfs [b5-gfsib02b] : No. of entries healed : 0
>>>>>>>>>>homegfs [b5-gfsib02b] : No. of entries in split-brain: 0
>>>>>>>>>>homegfs [b5-gfsib02b] : No. of heal failed entries : 3
>>>>>>>>>>
>>>>>>>>>>homegfs [b6-gfsib02a] : Starting time of crawl : Thu Jan
>>>>>>>>>>21 12:53:04 2016
>>>>>>>>>>homegfs [b6-gfsib02a] : Ending time of crawl : Thu Jan
>>>>>>>>>>21 12:53:04 2016
>>>>>>>>>>homegfs [b6-gfsib02a] : Type of crawl: INDEX
>>>>>>>>>>homegfs [b6-gfsib02a] : No. of entries healed : 0
>>>>>>>>>>homegfs [b6-gfsib02a] : No. of entries in split-brain: 0
>>>>>>>>>>homegfs [b6-gfsib02a] : No. of heal failed entries : 0
>>>>>>>>>>
>>>>>>>>>>homegfs [b7-gfsib02b] : Starting time of crawl : Thu Jan
>>>>>>>>>>21 12:53:09 2016
>>>>>>>>>>homegfs [b7-gfsib02b] : Ending time of crawl : Thu Jan
>>>>>>>>>>21 12:53:09 2016
>>>>>>>>>>homegfs [b7-gfsib02b] : Type of crawl: INDEX
>>>>>>>>>>homegfs [b7-gfsib02b] : No. of entries healed : 0
>>>>>>>>>>homegfs [b7-gfsib02b] : No. of entries in split-brain: 0
>>>>>>>>>>homegfs [b7-gfsib02b] : No. of heal failed entries : 0
>>>>>>>>>>
>>>>>>>>>>*** gluster bug in 'gluster volume heal homegfs statistics'
>>>>>>>>>>***
>>>>>>>>>>*** Use 'gluster volume heal homegfs info' until bug is fixed
>>>>>>>>>>***
>>>>>>>>>>
>>>>>>>>>>Brick gfs01a.corvidtec.com:/data/brick01a/homegfs/
>>>>>>>>>>Number of entries: 0
>>>>>>>>>>
>>>>>>>>>>Brick gfs01b.corvidtec.com:/data/brick01b/homegfs/
>>>>>>>>>>Number of entries: 0
>>>>>>>>>>
>>>>>>>>>>Brick gfs01a.corvidtec.com:/data/brick02a/homegfs/
>>>>>>>>>>Number of entries: 0
>>>>>>>>>>
>>>>>>>>>>Brick gfs01b.corvidtec.com:/data/brick02b/homegfs/
>>>>>>>>>>Number of entries: 0
>>>>>>>>>>
>>>>>>>>>>Brick gfs02a.corvidtec.com:/data/brick01a/homegfs/
>>>>>>>>>>/users/bangell/.gconfd - Is in split-brain
>>>>>>>>>>
>>>>>>>>>>Number of entries: 1
>>>>>>>>>>
>>>>>>>>>>Brick gfs02b.corvidtec.com:/data/brick01b/homegfs/
>>>>>>>>>>/users/bangell/.gconfd - Is in split-brain
>>>>>>>>>>
>>>>>>>>>>/users/bangell/.gconfd/saved_state
>>>>>>>>>>Number of entries: 2
>>>>>>>>>>
>>>>>>>>>>Brick gfs02a.corvidtec.com:/data/brick02a/homegfs/
>>>>>>>>>>Number of entries: 0
>>>>>>>>>>
>>>>>>>>>>Brick gfs02b.corvidtec.com:/data/brick02b/homegfs/
>>>>>>>>>>Number of entries: 0
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>On Thu, Jan 21, 2016 at 11:10 AM, Pranith Kumar Karampuri
>>>>>>>>>><pkarampu at redhat.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>On 01/21/2016 09:26 PM, Glomski, Patrick wrote:
>>>>>>>>>>>>I should mention that the problem is not currently occurring
>>>>>>>>>>>>and there are no heals (output appended). By restarting the
>>>>>>>>>>>>gluster services, we can stop the crawl, which lowers the
>>>>>>>>>>>>load for a while. Subsequent crawls seem to finish properly.
>>>>>>>>>>>>For what it's worth, files/folders that show up in the
>>>>>>>>>>>>'volume info' output during a hung crawl don't seem to be
>>>>>>>>>>>>anything out of the ordinary.
>>>>>>>>>>>>
>>>>>>>>>>>>Over the past four days, the typical time before the problem
>>>>>>>>>>>>recurs after suppressing it in this manner is an hour. Last
>>>>>>>>>>>>night when we reached out to you was the last time it
>>>>>>>>>>>>happened and the load has been low since (a relief). David
>>>>>>>>>>>>believes that recursively listing the files (ls -alR or
>>>>>>>>>>>>similar) from a client mount can force the issue to happen,
>>>>>>>>>>>>but obviously I'd rather not unless we have some precise
>>>>>>>>>>>>thing we're looking for. Let me know if you'd like me to
>>>>>>>>>>>>attempt to drive the system unstable like that and what I
>>>>>>>>>>>>should look for. As it's a production system, I'd rather not
>>>>>>>>>>>>leave it in this state for long.
>>>>>>>>>>>
>>>>>>>>>>>Will it be possible to send glustershd, mount logs of the
>>>>>>>>>>>past 4 days? I would like to see if this is because of
>>>>>>>>>>>directory self-heal going wild (Ravi is working on throttling
>>>>>>>>>>>feature for 3.8, which will allow to put breaks on self-heal
>>>>>>>>>>>traffic)
>>>>>>>>>>>
>>>>>>>>>>>Pranith
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>[root at gfs01a xattrop]# gluster volume heal homegfs info
>>>>>>>>>>>>Brick gfs01a.corvidtec.com:/data/brick01a/homegfs/
>>>>>>>>>>>>Number of entries: 0
>>>>>>>>>>>>
>>>>>>>>>>>>Brick gfs01b.corvidtec.com:/data/brick01b/homegfs/
>>>>>>>>>>>>Number of entries: 0
>>>>>>>>>>>>
>>>>>>>>>>>>Brick gfs01a.corvidtec.com:/data/brick02a/homegfs/
>>>>>>>>>>>>Number of entries: 0
>>>>>>>>>>>>
>>>>>>>>>>>>Brick gfs01b.corvidtec.com:/data/brick02b/homegfs/
>>>>>>>>>>>>Number of entries: 0
>>>>>>>>>>>>
>>>>>>>>>>>>Brick gfs02a.corvidtec.com:/data/brick01a/homegfs/
>>>>>>>>>>>>Number of entries: 0
>>>>>>>>>>>>
>>>>>>>>>>>>Brick gfs02b.corvidtec.com:/data/brick01b/homegfs/
>>>>>>>>>>>>Number of entries: 0
>>>>>>>>>>>>
>>>>>>>>>>>>Brick gfs02a.corvidtec.com:/data/brick02a/homegfs/
>>>>>>>>>>>>Number of entries: 0
>>>>>>>>>>>>
>>>>>>>>>>>>Brick gfs02b.corvidtec.com:/data/brick02b/homegfs/
>>>>>>>>>>>>Number of entries: 0
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>On Thu, Jan 21, 2016 at 10:40 AM, Pranith Kumar Karampuri
>>>>>>>>>>>><pkarampu at redhat.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>On 01/21/2016 08:25 PM, Glomski, Patrick wrote:
>>>>>>>>>>>>>>Hello, Pranith. The typical behavior is that the %cpu on a
>>>>>>>>>>>>>>glusterfsd process jumps to number of processor cores
>>>>>>>>>>>>>>available (800% or 1200%, depending on the pair of nodes
>>>>>>>>>>>>>>involved) and the load average on the machine goes very
>>>>>>>>>>>>>>high (~20). The volume's heal statistics output shows that
>>>>>>>>>>>>>>it is crawling one of the bricks and trying to heal, but
>>>>>>>>>>>>>>this crawl hangs and never seems to finish.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>The number of files in the xattrop directory varies over
>>>>>>>>>>>>>>time, so I ran a wc -l as you requested periodically for
>>>>>>>>>>>>>>some time and then started including a datestamped list of
>>>>>>>>>>>>>>the files that were in the xattrops directory on each
>>>>>>>>>>>>>>brick to see which were persistent. All bricks had files
>>>>>>>>>>>>>>in the xattrop folder, so all results are attached.
>>>>>>>>>>>>>Thanks this info is helpful. I don't see a lot of files.
>>>>>>>>>>>>>Could you give output of "gluster volume heal <volname>
>>>>>>>>>>>>>info"? Is there any directory in there which is LARGE?
>>>>>>>>>>>>>
>>>>>>>>>>>>>Pranith
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>Please let me know if there is anything else I can
>>>>>>>>>>>>>>provide.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>Patrick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>On Thu, Jan 21, 2016 at 12:01 AM, Pranith Kumar Karampuri
>>>>>>>>>>>>>><pkarampu at redhat.com> wrote:
>>>>>>>>>>>>>>>hey,
>>>>>>>>>>>>>>> Which process is consuming so much cpu? I went
>>>>>>>>>>>>>>>through the logs you gave me. I see that the following
>>>>>>>>>>>>>>>files are in gfid mismatch state:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>><066e4525-8f8b-43aa-b7a1-86bbcecc68b9/safebrowsing-backup>,
>>>>>>>>>>>>>>><1d48754b-b38c-403d-94e2-0f5c41d5f885/recovery.bak>,
>>>>>>>>>>>>>>><ddc92637-303a-4059-9c56-ab23b1bb6ae9/patch0008.cnvrg>,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>Could you give me the output of "ls
>>>>>>>>>>>>>>><brick-path>/indices/xattrop | wc -l" output on all the
>>>>>>>>>>>>>>>bricks which are acting this way? This will tell us the
>>>>>>>>>>>>>>>number of pending self-heals on the system.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>Pranith
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>On 01/20/2016 09:26 PM, David Robinson wrote:
>>>>>>>>>>>>>>>>resending with parsed logs...
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>I am having issues with 3.6.6 where the load will
>>>>>>>>>>>>>>>>>>spike up to 800% for one of the glusterfsd processes
>>>>>>>>>>>>>>>>>>and the users can no longer access the system. If I
>>>>>>>>>>>>>>>>>>reboot the node, the heal will finish normally after a
>>>>>>>>>>>>>>>>>>few minutes and the system will be responsive, but a
>>>>>>>>>>>>>>>>>>few hours later the issue will start again. It look
>>>>>>>>>>>>>>>>>>like it is hanging in a heal and spinning up the load
>>>>>>>>>>>>>>>>>>on one of the bricks. The heal gets stuck and says it
>>>>>>>>>>>>>>>>>>is crawling and never returns. After a few minutes of
>>>>>>>>>>>>>>>>>>the heal saying it is crawling, the load spikes up and
>>>>>>>>>>>>>>>>>>the mounts become unresponsive.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>Any suggestions on how to fix this? It has us stopped
>>>>>>>>>>>>>>>>>>cold as the user can no longer access the systems when
>>>>>>>>>>>>>>>>>>the load spikes... Logs attached.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>System setup info is:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>[root at gfs01a ~]# gluster volume info homegfs
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>Volume Name: homegfs
>>>>>>>>>>>>>>>>>>Type: Distributed-Replicate
>>>>>>>>>>>>>>>>>>Volume ID: 1e32672a-f1b7-4b58-ba94-58c085e59071
>>>>>>>>>>>>>>>>>>Status: Started
>>>>>>>>>>>>>>>>>>Number of Bricks: 4 x 2 = 8
>>>>>>>>>>>>>>>>>>Transport-type: tcp
>>>>>>>>>>>>>>>>>>Bricks:
>>>>>>>>>>>>>>>>>>Brick1: gfsib01a.corvidtec.com:/data/brick01a/homegfs
>>>>>>>>>>>>>>>>>>Brick2: gfsib01b.corvidtec.com:/data/brick01b/homegfs
>>>>>>>>>>>>>>>>>>Brick3: gfsib01a.corvidtec.com:/data/brick02a/homegfs
>>>>>>>>>>>>>>>>>>Brick4: gfsib01b.corvidtec.com:/data/brick02b/homegfs
>>>>>>>>>>>>>>>>>>Brick5: gfsib02a.corvidtec.com:/data/brick01a/homegfs
>>>>>>>>>>>>>>>>>>Brick6: gfsib02b.corvidtec.com:/data/brick01b/homegfs
>>>>>>>>>>>>>>>>>>Brick7: gfsib02a.corvidtec.com:/data/brick02a/homegfs
>>>>>>>>>>>>>>>>>>Brick8: gfsib02b.corvidtec.com:/data/brick02b/homegfs
>>>>>>>>>>>>>>>>>>Options Reconfigured:
>>>>>>>>>>>>>>>>>>performance.io-thread-count: 32
>>>>>>>>>>>>>>>>>>performance.cache-size: 128MB
>>>>>>>>>>>>>>>>>>performance.write-behind-window-size: 128MB
>>>>>>>>>>>>>>>>>>server.allow-insecure: on
>>>>>>>>>>>>>>>>>>network.ping-timeout: 42
>>>>>>>>>>>>>>>>>>storage.owner-gid: 100
>>>>>>>>>>>>>>>>>>geo-replication.indexing: off
>>>>>>>>>>>>>>>>>>geo-replication.ignore-pid-check: on
>>>>>>>>>>>>>>>>>>changelog.changelog: off
>>>>>>>>>>>>>>>>>>changelog.fsync-interval: 3
>>>>>>>>>>>>>>>>>>changelog.rollover-time: 15
>>>>>>>>>>>>>>>>>>server.manage-gids: on
>>>>>>>>>>>>>>>>>>diagnostics.client-log-level: WARNING
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>[root at gfs01a ~]# rpm -qa | grep gluster
>>>>>>>>>>>>>>>>>>gluster-nagios-common-0.1.1-0.el6.noarch
>>>>>>>>>>>>>>>>>>glusterfs-fuse-3.6.6-1.el6.x86_64
>>>>>>>>>>>>>>>>>>glusterfs-debuginfo-3.6.6-1.el6.x86_64
>>>>>>>>>>>>>>>>>>glusterfs-libs-3.6.6-1.el6.x86_64
>>>>>>>>>>>>>>>>>>glusterfs-geo-replication-3.6.6-1.el6.x86_64
>>>>>>>>>>>>>>>>>>glusterfs-api-3.6.6-1.el6.x86_64
>>>>>>>>>>>>>>>>>>glusterfs-devel-3.6.6-1.el6.x86_64
>>>>>>>>>>>>>>>>>>glusterfs-api-devel-3.6.6-1.el6.x86_64
>>>>>>>>>>>>>>>>>>glusterfs-3.6.6-1.el6.x86_64
>>>>>>>>>>>>>>>>>>glusterfs-cli-3.6.6-1.el6.x86_64
>>>>>>>>>>>>>>>>>>glusterfs-rdma-3.6.6-1.el6.x86_64
>>>>>>>>>>>>>>>>>>samba-vfs-glusterfs-4.1.11-2.el6.x86_64
>>>>>>>>>>>>>>>>>>glusterfs-server-3.6.6-1.el6.x86_64
>>>>>>>>>>>>>>>>>>glusterfs-extra-xlators-3.6.6-1.el6.x86_64
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>_______________________________________________
>>>>>>>>>>>>>>>>Gluster-devel mailing list
>>>>>>>>>>>>>>>>Gluster-devel at gluster.orghttp://www.gluster.org/mailman/listinfo/gluster-devel
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>_______________________________________________
>>>>>>>>>>>>>>>Gluster-users mailing list
>>>>>>>>>>>>>>>Gluster-users at gluster.org
>>>>>>>>>>>>>>>http://www.gluster.org/mailman/listinfo/gluster-users
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20160125/4018f0a2/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: data-brick02a-homegfs.4066.dump.1453742225.gz
Type: application/x-gzip
Size: 1138050 bytes
Desc: not available
URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20160125/4018f0a2/attachment-0002.gz>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: data-brick01a-homegfs.4061.dump.1453742224.gz
Type: application/x-gzip
Size: 640151 bytes
Desc: not available
URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20160125/4018f0a2/attachment-0003.gz>
More information about the Gluster-users
mailing list