[Gluster-users] [Gluster-devel] Memory leak in GlusterFS FUSE client

[Oleksandr Natalenko]

BTW, am I the only one who sees in

max_size=4294965480

almost 2^32? Could that be integer overflow?

On неділя, 24 січня 2016 р. 13:23:55 EET Oleksandr Natalenko wrote:
> The leak definitely remains. I did "find /mnt/volume -type d" over GlusterFS
> volume, with mentioned patches applied and without "kernel notifier loop
> terminated" message, but "glusterfs" process consumed ~4GiB of RAM after
> "find" finished.
> 
> Here is statedump:
> 
> https://gist.github.com/10cde83c63f1b4f1dd7a
> 
> I see the following:
> 
> ===
> [mount/fuse.fuse - usage-type gf_fuse_mt_iov_base memusage]
> size=4235109959
> num_allocs=2
> max_size=4294965480
> max_num_allocs=3
> total_allocs=4533524
> ===
> 
> ~4GiB, right?
> 
> Pranith, Kaleb?
> 
> On неділя, 24 січня 2016 р. 09:33:00 EET Mathieu Chateau wrote:
> > Thanks for all your tests and times, it looks promising :)
> > 
> > 
> > Cordialement,
> > Mathieu CHATEAU
> > http://www.lotp.fr
> > 
> > 2016-01-23 22:30 GMT+01:00 Oleksandr Natalenko <oleksandr at natalenko.name>:
> > > OK, now I'm re-performing tests with rsync + GlusterFS v3.7.6 + the
> > > following
> > > patches:
> > > 
> > > ===
> > > 
> > > Kaleb S KEITHLEY (1):
> > >       fuse: use-after-free fix in fuse-bridge, revisited
> > > 
> > > Pranith Kumar K (1):
> > >       mount/fuse: Fix use-after-free crash
> > > 
> > > Soumya Koduri (3):
> > >       gfapi: Fix inode nlookup counts
> > >       inode: Retire the inodes from the lru list in inode_table_destroy
> > >       upcall: free the xdr* allocations
> > > 
> > > ===
> > > 
> > > I run rsync from one GlusterFS volume to another. While memory started
> > > from
> > > under 100 MiBs, it stalled at around 600 MiBs for source volume and does
> > > not
> > > grow further. As for target volume it is ~730 MiBs, and that is why I'm
> > > going
> > > to do several rsync rounds to see if it grows more (with no patches bare
> > > 3.7.6
> > > could consume more than 20 GiBs).
> > > 
> > > No "kernel notifier loop terminated" message so far for both volumes.
> > > 
> > > Will report more in several days. I hope current patches will be
> > > incorporated
> > > into 3.7.7.
> > > 
> > > On пʼятниця, 22 січня 2016 р. 12:53:36 EET Kaleb S. KEITHLEY wrote:
> > > > On 01/22/2016 12:43 PM, Oleksandr Natalenko wrote:
> > > > > On пʼятниця, 22 січня 2016 р. 12:32:01 EET Kaleb S. KEITHLEY wrote:
> > > > >> I presume by this you mean you're not seeing the "kernel notifier
> > > > >> loop
> > > > >> terminated" error in your logs.
> > > > > 
> > > > > Correct, but only with simple traversing. Have to test under rsync.
> > > > 
> > > > Without the patch I'd get "kernel notifier loop terminated" within a
> > > > few
> > > > minutes of starting I/O.  With the patch I haven't seen it in 24 hours
> > > > of beating on it.
> > > > 
> > > > >> Hmmm.  My system is not leaking. Last 24 hours the RSZ and VSZ are
> > > 
> > > > >> stable:
> > > http://download.gluster.org/pub/gluster/glusterfs/dynamic-analysis/longe
> > > v
> > > 
> > > > >> ity /client.out
> > > > > 
> > > > > What ops do you perform on mounted volume? Read, write, stat? Is
> > > > > that
> > > > > 3.7.6 + patches?
> > > > 
> > > > I'm running an internally developed I/O load generator written by a
> > > > guy
> > > > on our perf team.
> > > > 
> > > > it does, create, write, read, rename, stat, delete, and more.
> 
> _______________________________________________
> Gluster-devel mailing list
> Gluster-devel at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-devel