[Gluster-users] One host won't rebalance
Nithya Balachandran
nbalacha at redhat.com
Fri Jun 5 09:46:11 UTC 2015
Hi,
Can you send us the gluster volume info for the volume and the rebalance log for the nodes? What is the pid of the process which does not proceed?
Thanks,
Nithya
----- Original Message -----
> From: "Atin Mukherjee" <amukherj at redhat.com>
> To: "Branden Timm" <btimm at wisc.edu>, "Atin Mukherjee" <atin.mukherjee83 at gmail.com>
> Cc: gluster-users at gluster.org
> Sent: Friday, June 5, 2015 9:26:44 AM
> Subject: Re: [Gluster-users] One host won't rebalance
>
>
>
> On 06/05/2015 12:05 AM, Branden Timm wrote:
> > I should add that there are additional errors as well in the brick logs.
> > I've posted them to a gist at
> > https://gist.github.com/brandentimm/576432ddabd70184d257
> As I mentioned earlier, DHT team can answer all your question on this
> failure.
>
> ~Atin
> >
> >
> > ________________________________
> > From: gluster-users-bounces at gluster.org <gluster-users-bounces at gluster.org>
> > on behalf of Branden Timm <btimm at wisc.edu>
> > Sent: Thursday, June 4, 2015 1:31 PM
> > To: Atin Mukherjee
> > Cc: gluster-users at gluster.org
> > Subject: Re: [Gluster-users] One host won't rebalance
> >
> >
> > I have stopped and restarted the rebalance several times, with no
> > difference in results. I have restarted all gluster services several
> > times, and completely rebooted the affected system.
> >
> >
> > Yes, gluster volume status does show an active rebalance task for volume
> > bigdata2.
> >
> >
> > I just noticed something else in the brick logs. I am seeing tons of
> > message similar to these two:
> >
> >
> > [2015-06-04 16:22:26.179797] E [posix-helpers.c:938:posix_handle_pair]
> > 0-bigdata2-posix: /<redacted path>: key:glusterfs-internal-fop flags: 1
> > length:4 error:Operation not supported
> > [2015-06-04 16:22:26.179874] E [posix.c:2325:posix_create]
> > 0-bigdata2-posix: setting xattrs on /<path redacted> failed (Operation not
> > supported)
> >
> >
> > Note that both messages were referring to the same file. I have confirmed
> > that xattr support is on in the underlying system. Additionally, these
> > messages are NOT appearing on the other cluster members that seem to be
> > unaffected by whatever is going on.
> >
> >
> > I found this bug which seems to be similar, but it was theoretically closed
> > for the 3.6.1 release: https://bugzilla.redhat.com/show_bug.cgi?id=1098794
> >
> >
> > Thanks again for your help.
> >
> >
> > ________________________________
> > From: Atin Mukherjee <atin.mukherjee83 at gmail.com>
> > Sent: Thursday, June 4, 2015 1:25 PM
> > To: Branden Timm
> > Cc: Shyamsundar Ranganathan; Susant Palai; gluster-users at gluster.org; Atin
> > Mukherjee; Nithya Balachandran
> > Subject: Re: [Gluster-users] One host won't rebalance
> >
> >
> > Sent from Samsung Galaxy S4
> > On 4 Jun 2015 22:18, "Branden Timm" <btimm at wisc.edu<mailto:btimm at wisc.edu>>
> > wrote:
> >>
> >> Atin, thank you for the response. Indeed I have investigated the locks on
> >> that file, and it is a glusterfs process with an exclusive read/write
> >> lock on the entire file:
> >>
> >> lsof
> >> /var/lib/glusterd/vols/bigdata2/rebalance/3b5025d4-3230-4914-ad0d-32f78587c4db.pid
> >> COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
> >> glusterfs 12776 root 6uW REG 253,1 6 15730814
> >> /var/lib/glusterd/vols/bigdata2/rebalance/3b5025d4-3230-4914-ad0d-32f78587c4db.pid
> >>
> >> That process was invoked with the following options:
> >>
> >> ps -ef | grep 12776
> >> root 12776 1 0 Jun03 ? 00:00:03 /usr/sbin/glusterfs -s
> >> localhost --volfile-id rebalance/bigdata2 --xlator-option
> >> *dht.use-readdirp=yes --xlator-option *dht.lookup-unhashed=yes
> >> --xlator-option *dht.assert-no-child-down=yes --xlator-option
> >> *replicate*.data-self-heal=off --xlator-option
> >> *replicate*.metadata-self-heal=off --xlator-option
> >> *replicate*.entry-self-heal=off --xlator-option
> >> *replicate*.readdir-failover=off --xlator-option *dht.readdir-optimize=on
> >> --xlator-option *dht.rebalance-cmd=1 --xlator-option
> >> *dht.node-uuid=3b5025d4-3230-4914-ad0d-32f78587c4db --socket-file
> >> /var/run/gluster/gluster-rebalance-2cd214fa-6fa4-49d0-93f6-de2c510d4dd4.sock
> >> --pid-file
> >> /var/lib/glusterd/vols/bigdata2/rebalance/3b5025d4-3230-4914-ad0d-32f78587c4db.pid
> >> -l /var/log/glusterfs/bigdata2-rebalance.log
> > This means there is already a rebalance process alive. Could you help me
> > with following:
> > 1. What does bigdata2-rebalance.log says? Don't you see a shutting down log
> > somewhere?
> > 2. Does output of gluster volume status consider bigdata2 is in
> > rebalancing?
> >
> > As a work around can you kill this process and start a fresh rebalance
> > process?
> >>
> >> Not sure if this information is helpful, but thanks for your reply.
> >>
> >> ________________________________________
> >> From: Atin Mukherjee <amukherj at redhat.com<mailto:amukherj at redhat.com>>
> >> Sent: Thursday, June 4, 2015 9:24 AM
> >> To: Branden Timm;
> >> gluster-users at gluster.org<mailto:gluster-users at gluster.org>; Nithya
> >> Balachandran; Susant Palai; Shyamsundar Ranganathan
> >> Subject: Re: [Gluster-users] One host won't rebalance
> >>
> >> On 06/04/2015 06:30 PM, Branden Timm wrote:
> >>> I'm really hoping somebody can at least point me in the right direction
> >>> on how to diagnose this. This morning, roughly 24 hours after initiating
> >>> the rebalance, one host of three in the cluster still hasn't done
> >>> anything:
> >>>
> >>>
> >>> Node Rebalanced-files size scanned failures
> >>> skipped status run time in secs
> >>> --------- ----------- ----------- ----------- -----------
> >>> ----------- ------------ --------------
> >>> localhost 2543 14.2TB 11162 0
> >>> 0 in progress 60946.00
> >>> gluster-8 1358 6.7TB 9298 0
> >>> 0 in progress 60946.00
> >>> gluster-6 0 0Bytes 0 0
> >>> 0 in progress 0.00
> >>>
> >>>
> >>> The only error showing up in the rebalance log is this:
> >>>
> >>>
> >>> [2015-06-03 19:59:58.314100] E [MSGID: 100018]
> >>> [glusterfsd.c:1677:glusterfs_pidfile_update] 0-glusterfsd: pidfile
> >>> /var/lib/glusterd/vols/bigdata2/rebalance/3b5025d4-3230-4914-ad0d-32f78587c4db.pid
> >>> lock failed [Resource temporarily unavailable]
> >> This looks like acquiring posix file lock failed and seems like
> >> rebalance is *actually not* running. I would leave it to dht folks to
> >> comment on it.
> >>
> >> ~Atin
> >>>
> >>>
> >>> Any help would be greatly appreciated!
> >>>
> >>>
> >>>
> >>> ________________________________
> >>> From:
> >>> gluster-users-bounces at gluster.org<mailto:gluster-users-bounces at gluster.org>
> >>> <gluster-users-bounces at gluster.org<mailto:gluster-users-bounces at gluster.org>>
> >>> on behalf of Branden Timm <btimm at wisc.edu<mailto:btimm at wisc.edu>>
> >>> Sent: Wednesday, June 3, 2015 11:52 AM
> >>> To: gluster-users at gluster.org<mailto:gluster-users at gluster.org>
> >>> Subject: [Gluster-users] One host won't rebalance
> >>>
> >>>
> >>> Greetings Gluster Users,
> >>>
> >>> I started a rebalance operation on my distributed volume today (CentOS
> >>> 6.6/GlusterFS 3.6.3), and one of the three hosts comprising the cluster
> >>> is just sitting at 0.00 for 'run time in secs', and shows 0 files
> >>> scanned, failed, or skipped.
> >>>
> >>>
> >>> I've reviewed the rebalance log for the affected server, and I'm seeing
> >>> these messages:
> >>>
> >>>
> >>> [2015-06-03 15:34:32.703692] I [MSGID: 100030] [glusterfsd.c:2018:main]
> >>> 0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version 3.6.3
> >>> (args: /usr/sbin/glusterfs -s localhost --volfile-id rebalance/bigdata2
> >>> --xlator-option *dht.use-readdirp=yes --xlator-option
> >>> *dht.lookup-unhashed=yes --xlator-option *dht.assert-no-child-down=yes
> >>> --xlator-option *replicate*.data-self-heal=off --xlator-option
> >>> *replicate*.metadata-self-heal=off --xlator-option
> >>> *replicate*.entry-self-heal=off --xlator-option
> >>> *replicate*.readdir-failover=off --xlator-option
> >>> *dht.readdir-optimize=on --xlator-option *dht.rebalance-cmd=1
> >>> --xlator-option *dht.node-uuid=3b5025d4-3230-4914-ad0d-32f78587c4db
> >>> --socket-file
> >>> /var/run/gluster/gluster-rebalance-2cd214fa-6fa4-49d0-93f6-de2c510d4dd4.sock
> >>> --pid-file
> >>> /var/lib/glusterd/vols/bigdata2/rebalance/3b5025d4-3230-4914-ad0d-32f78587c4db.pid
> >>> -l /var/log/glusterfs/bigdata2-rebalance.log)
> >>> [2015-06-03 15:34:32.704217] E [MSGID: 100018]
> >>> [glusterfsd.c:1677:glusterfs_pidfile_update] 0-glusterfsd: pidfile
> >>> /var/lib/glusterd/vols/bigdata2/rebalance/3b5025d4-3230-4914-ad0d-32f78587c4db.pid
> >>> lock failed [Resource temporarily unavailable]
> >>>
> >>>
> >>> I initially investigated the first warning, readv on
> >>> 127.0.0.1:24007<http://127.0.0.1:24007> failed. netstat shows that
> >>> ip/port belonging to a glusterd process. Beyond that I wasn't able to
> >>> tell why there would be a problem.
> >>>
> >>>
> >>> Next, I checked out what was up with the lock file that reported resource
> >>> temprarily unavailable. The file is present and contains the pid of a
> >>> running glusterd process:
> >>>
> >>>
> >>> root 12776 1 0 10:18 ? 00:00:00 /usr/sbin/glusterfs -s
> >>> localhost --volfile-id rebalance/bigdata2 --xlator-option
> >>> *dht.use-readdirp=yes --xlator-option *dht.lookup-unhashed=yes
> >>> --xlator-option *dht.assert-no-child-down=yes --xlator-option
> >>> *replicate*.data-self-heal=off --xlator-option
> >>> *replicate*.metadata-self-heal=off --xlator-option
> >>> *replicate*.entry-self-heal=off --xlator-option
> >>> *replicate*.readdir-failover=off --xlator-option
> >>> *dht.readdir-optimize=on --xlator-option *dht.rebalance-cmd=1
> >>> --xlator-option *dht.node-uuid=3b5025d4-3230-4914-ad0d-32f78587c4db
> >>> --socket-file
> >>> /var/run/gluster/gluster-rebalance-2cd214fa-6fa4-49d0-93f6-de2c510d4dd4.sock
> >>> --pid-file
> >>> /var/lib/glusterd/vols/bigdata2/rebalance/3b5025d4-3230-4914-ad0d-32f78587c4db.pid
> >>> -l /var/log/glusterfs/bigdata2-rebalance.log
> >>>
> >>>
> >>> Finally, one other thing I saw from running 'gluster volume status
> >>> <volname> clients' is that the affected server is the only one of the
> >>> three that lists a 127.0.0.1<http://127.0.0.1>:<port> client for each of
> >>> it's bricks. I don't know why there would be a client coming from
> >>> loopback on the server, but it seems strange. Additionally, it makes me
> >>> wonder if the fact that I have auth.allow set to a single subnet (that
> >>> doesn't include 127.0.0.1) is causing this problem for some reason, or
> >>> if loopback is implicitly allowed to connect.
> >>>
> >>>
> >>> Any tips or suggestions would be much appreciated. Thanks!
> >>>
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> Gluster-users mailing list
> >>> Gluster-users at gluster.org<mailto:Gluster-users at gluster.org>
> >>> http://www.gluster.org/mailman/listinfo/gluster-users
> >>>
> >>
> >> --
> >> ~Atin
> >> _______________________________________________
> >> Gluster-users mailing list
> >> Gluster-users at gluster.org<mailto:Gluster-users at gluster.org>
> >> http://www.gluster.org/mailman/listinfo/gluster-users
> >
> >
> >
> > _______________________________________________
> > Gluster-users mailing list
> > Gluster-users at gluster.org
> > http://www.gluster.org/mailman/listinfo/gluster-users
> >
>
> --
> ~Atin
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-users
>
More information about the Gluster-users
mailing list