[Gluster-users] back to problems: gluster 3.5.4, qemu and debian 8

[Michael Mol]

I think you'll find it's the write-behind that was killing you.
Write-behind opens you up to a number of data consistency issues, and I
strongly disrecommend it unless you have a rock-solid infrastructure from
the writer all the way to the disk the data ultimately sits on.

I bet that if you re-enabled read-ahead, you won't see the problem. Just
leave write-behind off.

On Sat, Jul 18, 2015, 10:44 AM Roman <romeo.r at gmail.com> wrote:

solved after I've added (thanks to Niels de Vos) these options to the
volumes:

performance.read-ahead: off

performance.write-behind: off


2015-07-15 17:23 GMT+03:00 Roman <romeo.r at gmail.com>:

hey,

I've updated the bug, if some1 has some ideas - share plz.

https://bugzilla.redhat.com/show_bug.cgi?id=1242913


2015-07-14 19:14 GMT+03:00 Kaushal M <kshlmster at gmail.com>:

 Just a wild guess. What is the filesystem used for the debian 8
installation? It could be the culprit.

On Tue, Jul 14, 2015 at 7:27 PM, Roman <romeo.r at gmail.com> wrote:
> I've done this way: installed debian8 on local disks using netinstall iso,
> created a template of it and then cloned (full clone) it to glusterfs
> storage backend. VM boots and runs fine... untill I start to install
> something massive (DE ie). Last time it was mate failed to install due to
> python-gtk2 package problems (complaing that it could not compile it)
>

> 2015-07-14 16:37 GMT+03:00 Scott Harvanek <scott.harvanek at login.com>:
>>
>> What happens if you install from a full CD and not a net-install?
>>
>> Limit the variables.  Currently you are relying on remote mirrors and
>> Internet connectivity.
>>
>> It's either a Proxmox or Debian issue, I really don't think it's Gluster.
>> We have hundreds of Jessie installs running on GlusterFS backends.
>>
>> --
>> Scott H.
>> Login, LLC.
>>
>>
>>
>> Roman
>> July 14, 2015 at 9:30 AM
>> Hey,
>>
>> thanks for reply.
>> If it would be networking related, it would affect everything. But it is
>> only debian 8 which won't install.
>> And yes, i did iperf test between gluster and proxmox nodes. Its ok.
>> Installation fails on every node, where i try to install d8. Sometimes it
>> goes well (today 1 of 6 tries was fine). Other distros install fine.
>> Sometimes installation process finishes, but VM won't start, just hangs
>> with errors like in this attached.
>>
>>
>>
>>
>> --
>> Best regards,
>> Roman.
>> Scott Harvanek
>> July 14, 2015 at 9:17 AM
>> We don't have this issue, I'll take a stab tho-
>>
>> Have you confirmed everything is good on the network side of things?
>> MTU/Loss/Errors?
>>
>> Is your inconsistency linked to one specific brick? Have you tried
running
>> a replica instead of distributed?
>>
>>
>>
>> _______________________________________________
>> Gluster-users mailing list

>> Gluster-users at gluster.org
>> http://www.gluster.org/mailman/listinfo/gluster-users
>> Roman
>> July 14, 2015 at 6:38 AM
>> here is one of the errors example. its like files that debian installer
>> copies to the virtual disk that is located on glusterfs storage are
getting
>> corrupted.
>> in-target is /dev/vda1
>>
>>
>>
>>
>>
>> --
>> Best regards,
>> Roman.
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.org
>> http://www.gluster.org/mailman/listinfo/gluster-users
>> Roman
>> July 14, 2015 at 4:50 AM
>> Ubuntu 14.04 LTS base install and then mate install were fine!
>>
>>
>>
>>
>> --
>> Best regards,
>> Roman.
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.org
>> http://www.gluster.org/mailman/listinfo/gluster-users
>> Roman
>> July 13, 2015 at 7:35 PM
>> Bah... the randomness of this issue is killing me.
>> Not only HA volumes are affected. Got an error during installation of d8
>> with mate (on python-gtk2 pkg) on Distributed volume also.
>> I've checked the MD5SUM of installation iso, its ok.
>>
>> Shortly after that on the same VE node I installed D7 with Gnome without
>> any problem on the HA glusterf volume.
>>
>> And on the same VE node I've installed D8 with both Mate and Gnome using
>> local storage disks without problems. There is a bug somewhere in
gluster or
>> qemu... Proxmox uses RH kernel btw:
>>
>> Linux services 2.6.32-37-pve
>> QEMU emulator version 2.2.1
>> glusterfs 3.6.4
>>
>> any ideas?
>> I'm ready to help to investigate this bug.
>> When sun will shine, I'll try to install latest Ubuntu also. But now I'm
>> going to sleep.
>>
>>
>>
>>
>> --
>> Best regards,
>> Roman.
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.org
>> http://www.gluster.org/mailman/listinfo/gluster-users
>>
>>
>
>
>
> --
> Best regards,
> Roman.
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-users



-- 

Best regards,
Roman.



-- 

Best regards,
Roman.

_______________________________________________
Gluster-users mailing list
Gluster-users at gluster.org
http://www.gluster.org/mailman/listinfo/gluster-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20150718/90629ac8/attachment.html>