[Gluster-users] [Gluster-devel] missing files
David F. Robinson
david.robinson at corvidtec.com
Fri Feb 6 02:15:11 UTC 2015
copy that. Thanks for looking into the issue.
David
------ Original Message ------
From: "Benjamin Turner" <bennyturns at gmail.com>
To: "David F. Robinson" <david.robinson at corvidtec.com>
Cc: "Ben Turner" <bturner at redhat.com>; "Pranith Kumar Karampuri"
<pkarampu at redhat.com>; "Xavier Hernandez" <xhernandez at datalab.es>;
"gluster-users at gluster.org" <gluster-users at gluster.org>; "Gluster Devel"
<gluster-devel at gluster.org>
Sent: 2/5/2015 9:05:43 PM
Subject: Re: [Gluster-users] [Gluster-devel] missing files
>Correct! I have seen(back in the day, its been 3ish years since I have
>seen it) having say 50+ volumes each with a geo rep session take system
>load levels to the point where pings couldn't be serviced within the
>ping timeout. So it is known to happen but there has been alot of work
>in the geo rep space to help here, some of which is discussed:
>
>https://medium.com/@msvbhat/distributed-geo-replication-in-glusterfs-ec95f4393c50
>
>(think tar + ssh and other fixes)Your symptoms remind me of that case
>of 50+ geo repd volumes, thats why I mentioned it from the start. My
>current shoot from the hip theory is when rsyncing all that data the
>servers got too busy to service the pings and it lead to disconnects.
>This is common across all of the clustering / distributed software I
>have worked on, if the system gets too busy to service heartbeat within
>the timeout things go crazy(think fork bomb on a single host). Now
>this could be a case of me putting symptoms from an old issue into what
>you are describing, but thats where my head is at. If I'm correct I
>should be able to repro using a similar workload. I think that the
>multi threaded epoll changes that _just_ landed in master will help
>resolve this, but they are so new I haven't been able to test this.
>I'll know more when I get a chance to test tomorrow.
>
>-b
>
>On Thu, Feb 5, 2015 at 6:04 PM, David F. Robinson
><david.robinson at corvidtec.com> wrote:
>>Isn't rsync what geo-rep uses?
>>
>>David (Sent from mobile)
>>
>>===============================
>>David F. Robinson, Ph.D.
>>President - Corvid Technologies
>>704.799.6944 x101 [office]
>>704.252.1310 [cell]
>>704.799.7974 [fax]
>>David.Robinson at corvidtec.com
>>http://www.corvidtechnologies.com
>>
>> > On Feb 5, 2015, at 5:41 PM, Ben Turner <bturner at redhat.com> wrote:
>> >
>> > ----- Original Message -----
>> >> From: "Ben Turner" <bturner at redhat.com>
>> >> To: "David F. Robinson" <david.robinson at corvidtec.com>
>> >> Cc: "Pranith Kumar Karampuri" <pkarampu at redhat.com>, "Xavier
>>Hernandez" <xhernandez at datalab.es>, "Benjamin Turner"
>> >> <bennyturns at gmail.com>, gluster-users at gluster.org, "Gluster Devel"
>><gluster-devel at gluster.org>
>> >> Sent: Thursday, February 5, 2015 5:22:26 PM
>> >> Subject: Re: [Gluster-users] [Gluster-devel] missing files
>> >>
>> >> ----- Original Message -----
>> >>> From: "David F. Robinson" <david.robinson at corvidtec.com>
>> >>> To: "Ben Turner" <bturner at redhat.com>
>> >>> Cc: "Pranith Kumar Karampuri" <pkarampu at redhat.com>, "Xavier
>>Hernandez"
>> >>> <xhernandez at datalab.es>, "Benjamin Turner"
>> >>> <bennyturns at gmail.com>, gluster-users at gluster.org, "Gluster Devel"
>> >>> <gluster-devel at gluster.org>
>> >>> Sent: Thursday, February 5, 2015 5:01:13 PM
>> >>> Subject: Re: [Gluster-users] [Gluster-devel] missing files
>> >>>
>> >>> I'll send you the emails I sent Pranith with the logs. What causes
>>these
>> >>> disconnects?
>> >>
>> >> Thanks David! Disconnects happen when there are interruption in
>> >> communication between peers, normally there is ping timeout that
>>happens.
>> >> It could be anything from a flaky NW to the system was to busy to
>>respond
>> >> to the pings. My initial take is more towards the ladder as rsync
>>is
>> >> absolutely the worst use case for gluster - IIRC it writes in 4kb
>>blocks. I
>> >> try to keep my writes at least 64KB as in my testing that is the
>>smallest
>> >> block size I can write with before perf starts to really drop off.
>>I'll try
>> >> something similar in the lab.
>> >
>> > Ok I do think that the file being self healed is RCA for what you
>>were seeing. Lets look at one of the disconnects:
>> >
>> > data-brick02a-homegfs.log:[2015-02-03 20:54:02.772180] I
>>[server.c:518:server_rpc_notify] 0-homegfs-server: disconnecting
>>connection from
>>gfs01b.corvidtec.com-4175-2015/02/02-16:44:31:179119-homegfs-client-2-0-1
>> >
>> > And in the glustershd.log from the gfs01b_glustershd.log file:
>> >
>> > [2015-02-03 20:55:48.001797] I
>>[afr-self-heal-entry.c:554:afr_selfheal_entry_do]
>>0-homegfs-replicate-0: performing entry selfheal on
>>6c79a368-edaa-432b-bef9-ec690ab42448
>> > [2015-02-03 20:55:49.341996] I
>>[afr-self-heal-common.c:476:afr_log_selfheal] 0-homegfs-replicate-0:
>>Completed entry selfheal on 6c79a368-edaa-432b-bef9-ec690ab42448.
>>source=1 sinks=0
>> > [2015-02-03 20:55:49.343093] I
>>[afr-self-heal-entry.c:554:afr_selfheal_entry_do]
>>0-homegfs-replicate-0: performing entry selfheal on
>>792cb0d6-9290-4447-8cd7-2b2d7a116a69
>> > [2015-02-03 20:55:50.463652] I
>>[afr-self-heal-common.c:476:afr_log_selfheal] 0-homegfs-replicate-0:
>>Completed entry selfheal on 792cb0d6-9290-4447-8cd7-2b2d7a116a69.
>>source=1 sinks=0
>> > [2015-02-03 20:55:51.465289] I
>>[afr-self-heal-metadata.c:54:__afr_selfheal_metadata_do]
>>0-homegfs-replicate-0: performing metadata selfheal on
>>403e661a-1c27-4e79-9867-c0572aba2b3c
>> > [2015-02-03 20:55:51.466515] I
>>[afr-self-heal-common.c:476:afr_log_selfheal] 0-homegfs-replicate-0:
>>Completed metadata selfheal on 403e661a-1c27-4e79-9867-c0572aba2b3c.
>>source=1 sinks=0
>> > [2015-02-03 20:55:51.467098] I
>>[afr-self-heal-entry.c:554:afr_selfheal_entry_do]
>>0-homegfs-replicate-0: performing entry selfheal on
>>403e661a-1c27-4e79-9867-c0572aba2b3c
>> > [2015-02-03 20:55:55.257808] I
>>[afr-self-heal-common.c:476:afr_log_selfheal] 0-homegfs-replicate-0:
>>Completed entry selfheal on 403e661a-1c27-4e79-9867-c0572aba2b3c.
>>source=1 sinks=0
>> > [2015-02-03 20:55:55.258548] I
>>[afr-self-heal-metadata.c:54:__afr_selfheal_metadata_do]
>>0-homegfs-replicate-0: performing metadata selfheal on
>>c612ee2f-2fb4-4157-a9ab-5a2d5603c541
>> > [2015-02-03 20:55:55.259367] I
>>[afr-self-heal-common.c:476:afr_log_selfheal] 0-homegfs-replicate-0:
>>Completed metadata selfheal on c612ee2f-2fb4-4157-a9ab-5a2d5603c541.
>>source=1 sinks=0
>> > [2015-02-03 20:55:55.259980] I
>>[afr-self-heal-entry.c:554:afr_selfheal_entry_do]
>>0-homegfs-replicate-0: performing entry selfheal on
>>c612ee2f-2fb4-4157-a9ab-5a2d5603c541
>> >
>> > As you can see the self heal logs are just spammed with files being
>>healed, and I looked at a couple of disconnects and I see self heals
>>getting run shortly after on the bricks that were down. Now we need
>>to find the cause of the disconnects, I am thinking once the
>>disconnects are resolved the files should be properly copied over
>>without SH having to fix things. Like I said I'll give this a go on
>>my lab systems and see if I can repro the disconnects, I'll have time
>>to run through it tomorrow. If in the mean time anyone else has a
>>theory / anything to add here it would be appreciated.
>> >
>> > -b
>> >
>> >> -b
>> >>
>> >>> David (Sent from mobile)
>> >>>
>> >>> ===============================
>> >>> David F. Robinson, Ph.D.
>> >>> President - Corvid Technologies
>> >>> 704.799.6944 x101 [office]
>> >>> 704.252.1310 [cell]
>> >>> 704.799.7974 [fax]
>> >>> David.Robinson at corvidtec.com
>> >>> http://www.corvidtechnologies.com
>> >>>
>> >>>> On Feb 5, 2015, at 4:55 PM, Ben Turner <bturner at redhat.com>
>>wrote:
>> >>>>
>> >>>> ----- Original Message -----
>> >>>>> From: "Pranith Kumar Karampuri" <pkarampu at redhat.com>
>> >>>>> To: "Xavier Hernandez" <xhernandez at datalab.es>, "David F.
>>Robinson"
>> >>>>> <david.robinson at corvidtec.com>, "Benjamin Turner"
>> >>>>> <bennyturns at gmail.com>
>> >>>>> Cc: gluster-users at gluster.org, "Gluster Devel"
>> >>>>> <gluster-devel at gluster.org>
>> >>>>> Sent: Thursday, February 5, 2015 5:30:04 AM
>> >>>>> Subject: Re: [Gluster-users] [Gluster-devel] missing files
>> >>>>>
>> >>>>>
>> >>>>>> On 02/05/2015 03:48 PM, Pranith Kumar Karampuri wrote:
>> >>>>>> I believe David already fixed this. I hope this is the same
>>issue he
>> >>>>>> told about permissions issue.
>> >>>>> Oops, it is not. I will take a look.
>> >>>>
>> >>>> Yes David exactly like these:
>> >>>>
>> >>>> data-brick02a-homegfs.log:[2015-02-03 19:09:34.568842] I
>> >>>> [server.c:518:server_rpc_notify] 0-homegfs-server: disconnecting
>> >>>> connection from
>> >>>>
>>gfs02a.corvidtec.com-18563-2015/02/03-19:07:58:519134-homegfs-client-2-0-0
>> >>>> data-brick02a-homegfs.log:[2015-02-03 19:09:41.286551] I
>> >>>> [server.c:518:server_rpc_notify] 0-homegfs-server: disconnecting
>> >>>> connection from
>> >>>>
>>gfs01a.corvidtec.com-12804-2015/02/03-19:09:38:497808-homegfs-client-2-0-0
>> >>>> data-brick02a-homegfs.log:[2015-02-03 19:16:35.906412] I
>> >>>> [server.c:518:server_rpc_notify] 0-homegfs-server: disconnecting
>> >>>> connection from
>> >>>>
>>gfs02b.corvidtec.com-27190-2015/02/03-19:15:53:458467-homegfs-client-2-0-0
>> >>>> data-brick02a-homegfs.log:[2015-02-03 19:51:22.761293] I
>> >>>> [server.c:518:server_rpc_notify] 0-homegfs-server: disconnecting
>> >>>> connection from
>> >>>>
>>gfs01a.corvidtec.com-25926-2015/02/03-19:51:02:89070-homegfs-client-2-0-0
>> >>>> data-brick02a-homegfs.log:[2015-02-03 20:54:02.772180] I
>> >>>> [server.c:518:server_rpc_notify] 0-homegfs-server: disconnecting
>> >>>> connection from
>> >>>>
>>gfs01b.corvidtec.com-4175-2015/02/02-16:44:31:179119-homegfs-client-2-0-1
>> >>>>
>> >>>> You can 100% verify my theory if you can correlate the time on
>>the
>> >>>> disconnects to the time that the missing files were healed. Can
>>you have
>> >>>> a look at /var/log/glusterfs/glustershd.log? That has all of the
>>healed
>> >>>> files + timestamps, if we can see a disconnect during the rsync
>>and a
>> >>>> self
>> >>>> heal of the missing file I think we can safely assume that the
>> >>>> disconnects
>> >>>> may have caused this. I'll try this on my test systems, how much
>>data
>> >>>> did
>> >>>> you rsync? What size ish of files / an idea of the dir layout?
>> >>>>
>> >>>> @Pranith - Could bricks flapping up and down during the rsync
>>cause the
>> >>>> files to be missing on the first ls(written to 1 subvol but not
>>the other
>> >>>> cause it was down), the ls triggered SH, and thats why the files
>>were
>> >>>> there for the second ls be a possible cause here?
>> >>>>
>> >>>> -b
>> >>>>
>> >>>>
>> >>>>> Pranith
>> >>>>>>
>> >>>>>> Pranith
>> >>>>>>> On 02/05/2015 03:44 PM, Xavier Hernandez wrote:
>> >>>>>>> Is the failure repeatable ? with the same directories ?
>> >>>>>>>
>> >>>>>>> It's very weird that the directories appear on the volume when
>>you do
>> >>>>>>> an 'ls' on the bricks. Could it be that you only made a single
>>'ls'
>> >>>>>>> on fuse mount which not showed the directory ? Is it possible
>>that
>> >>>>>>> this 'ls' triggered a self-heal that repaired the problem,
>>whatever
>> >>>>>>> it was, and when you did another 'ls' on the fuse mount after
>>the
>> >>>>>>> 'ls' on the bricks, the directories were there ?
>> >>>>>>>
>> >>>>>>> The first 'ls' could have healed the files, causing that the
>> >>>>>>> following 'ls' on the bricks showed the files as if nothing
>>were
>> >>>>>>> damaged. If that's the case, it's possible that there were
>>some
>> >>>>>>> disconnections during the copy.
>> >>>>>>>
>> >>>>>>> Added Pranith because he knows better replication and
>>self-heal
>> >>>>>>> details.
>> >>>>>>>
>> >>>>>>> Xavi
>> >>>>>>>
>> >>>>>>>> On 02/04/2015 07:23 PM, David F. Robinson wrote:
>> >>>>>>>> Distributed/replicated
>> >>>>>>>>
>> >>>>>>>> Volume Name: homegfs
>> >>>>>>>> Type: Distributed-Replicate
>> >>>>>>>> Volume ID: 1e32672a-f1b7-4b58-ba94-58c085e59071
>> >>>>>>>> Status: Started
>> >>>>>>>> Number of Bricks: 4 x 2 = 8
>> >>>>>>>> Transport-type: tcp
>> >>>>>>>> Bricks:
>> >>>>>>>> Brick1: gfsib01a.corvidtec.com:/data/brick01a/homegfs
>> >>>>>>>> Brick2: gfsib01b.corvidtec.com:/data/brick01b/homegfs
>> >>>>>>>> Brick3: gfsib01a.corvidtec.com:/data/brick02a/homegfs
>> >>>>>>>> Brick4: gfsib01b.corvidtec.com:/data/brick02b/homegfs
>> >>>>>>>> Brick5: gfsib02a.corvidtec.com:/data/brick01a/homegfs
>> >>>>>>>> Brick6: gfsib02b.corvidtec.com:/data/brick01b/homegfs
>> >>>>>>>> Brick7: gfsib02a.corvidtec.com:/data/brick02a/homegfs
>> >>>>>>>> Brick8: gfsib02b.corvidtec.com:/data/brick02b/homegfs
>> >>>>>>>> Options Reconfigured:
>> >>>>>>>> performance.io-thread-count: 32
>> >>>>>>>> performance.cache-size: 128MB
>> >>>>>>>> performance.write-behind-window-size: 128MB
>> >>>>>>>> server.allow-insecure: on
>> >>>>>>>> network.ping-timeout: 10
>> >>>>>>>> storage.owner-gid: 100
>> >>>>>>>> geo-replication.indexing: off
>> >>>>>>>> geo-replication.ignore-pid-check: on
>> >>>>>>>> changelog.changelog: on
>> >>>>>>>> changelog.fsync-interval: 3
>> >>>>>>>> changelog.rollover-time: 15
>> >>>>>>>> server.manage-gids: on
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>> ------ Original Message ------
>> >>>>>>>> From: "Xavier Hernandez" <xhernandez at datalab.es>
>> >>>>>>>> To: "David F. Robinson" <david.robinson at corvidtec.com>;
>>"Benjamin
>> >>>>>>>> Turner" <bennyturns at gmail.com>
>> >>>>>>>> Cc: "gluster-users at gluster.org" <gluster-users at gluster.org>;
>>"Gluster
>> >>>>>>>> Devel" <gluster-devel at gluster.org>
>> >>>>>>>> Sent: 2/4/2015 6:03:45 AM
>> >>>>>>>> Subject: Re: [Gluster-devel] missing files
>> >>>>>>>>
>> >>>>>>>>>> On 02/04/2015 01:30 AM, David F. Robinson wrote:
>> >>>>>>>>>> Sorry. Thought about this a little more. I should have been
>> >>>>>>>>>> clearer.
>> >>>>>>>>>> The files were on both bricks of the replica, not just one
>>side.
>> >>>>>>>>>> So,
>> >>>>>>>>>> both bricks had to have been up... The files/directories
>>just
>> >>>>>>>>>> don't show
>> >>>>>>>>>> up on the mount.
>> >>>>>>>>>> I was reading and saw a related bug
>> >>>>>>>>>> (https://bugzilla.redhat.com/show_bug.cgi?id=1159484). I
>>saw it
>> >>>>>>>>>> suggested to run:
>> >>>>>>>>>> find <mount> -d -exec getfattr -h -n trusted.ec.heal
>>{} \;
>> >>>>>>>>>
>> >>>>>>>>> This command is specific for a dispersed volume. It won't do
>> >>>>>>>>> anything
>> >>>>>>>>> (aside from the error you are seeing) on a replicated
>>volume.
>> >>>>>>>>>
>> >>>>>>>>> I think you are using a replicated volume, right ?
>> >>>>>>>>>
>> >>>>>>>>> In this case I'm not sure what can be happening. Is your
>>volume a
>> >>>>>>>>> pure
>> >>>>>>>>> replicated one or a distributed-replicated ? on a pure
>>replicated it
>> >>>>>>>>> doesn't make sense that some entries do not show in an 'ls'
>>when the
>> >>>>>>>>> file is in both replicas (at least without any error message
>>in the
>> >>>>>>>>> logs). On a distributed-replicated it could be caused by
>>some
>> >>>>>>>>> problem
>> >>>>>>>>> while combining contents of each replica set.
>> >>>>>>>>>
>> >>>>>>>>> What's the configuration of your volume ?
>> >>>>>>>>>
>> >>>>>>>>> Xavi
>> >>>>>>>>>
>> >>>>>>>>>>
>> >>>>>>>>>> I get a bunch of errors for operation not supported:
>> >>>>>>>>>> [root at gfs02a homegfs]# find wks_backup -d -exec getfattr -h
>>-n
>> >>>>>>>>>> trusted.ec.heal {} \;
>> >>>>>>>>>> find: warning: the -d option is deprecated; please use
>>-depth
>> >>>>>>>>>> instead,
>> >>>>>>>>>> because the latter is a POSIX-compliant feature.
>> >>>>>>>>>> wks_backup/homer_backup/backup: trusted.ec.heal: Operation
>>not
>> >>>>>>>>>> supported
>> >>>>>>>>>> wks_backup/homer_backup/logs/2014_05_20.log:
>>trusted.ec.heal:
>> >>>>>>>>>> Operation
>> >>>>>>>>>> not supported
>> >>>>>>>>>> wks_backup/homer_backup/logs/2014_05_21.log:
>>trusted.ec.heal:
>> >>>>>>>>>> Operation
>> >>>>>>>>>> not supported
>> >>>>>>>>>> wks_backup/homer_backup/logs/2014_05_18.log:
>>trusted.ec.heal:
>> >>>>>>>>>> Operation
>> >>>>>>>>>> not supported
>> >>>>>>>>>> wks_backup/homer_backup/logs/2014_05_19.log:
>>trusted.ec.heal:
>> >>>>>>>>>> Operation
>> >>>>>>>>>> not supported
>> >>>>>>>>>> wks_backup/homer_backup/logs/2014_05_22.log:
>>trusted.ec.heal:
>> >>>>>>>>>> Operation
>> >>>>>>>>>> not supported
>> >>>>>>>>>> wks_backup/homer_backup/logs: trusted.ec.heal: Operation
>>not
>> >>>>>>>>>> supported
>> >>>>>>>>>> wks_backup/homer_backup: trusted.ec.heal: Operation not
>>supported
>> >>>>>>>>>> ------ Original Message ------
>> >>>>>>>>>> From: "Benjamin Turner" <bennyturns at gmail.com
>> >>>>>>>>>> <mailto:bennyturns at gmail.com>>
>> >>>>>>>>>> To: "David F. Robinson" <david.robinson at corvidtec.com
>> >>>>>>>>>> <mailto:david.robinson at corvidtec.com>>
>> >>>>>>>>>> Cc: "Gluster Devel" <gluster-devel at gluster.org
>> >>>>>>>>>> <mailto:gluster-devel at gluster.org>>;
>>"gluster-users at gluster.org"
>> >>>>>>>>>> <gluster-users at gluster.org
>><mailto:gluster-users at gluster.org>>
>> >>>>>>>>>> Sent: 2/3/2015 7:12:34 PM
>> >>>>>>>>>> Subject: Re: [Gluster-devel] missing files
>> >>>>>>>>>>> It sounds to me like the files were only copied to one
>>replica,
>> >>>>>>>>>>> werent
>> >>>>>>>>>>> there for the initial for the initial ls which triggered a
>>self
>> >>>>>>>>>>> heal,
>> >>>>>>>>>>> and were there for the last ls because they were healed.
>>Is there
>> >>>>>>>>>>> any
>> >>>>>>>>>>> chance that one of the replicas was down during the rsync?
>>It
>> >>>>>>>>>>> could
>> >>>>>>>>>>> be that you lost a brick during copy or something like
>>that. To
>> >>>>>>>>>>> confirm I would look for disconnects in the brick logs as
>>well as
>> >>>>>>>>>>> checking glusterfshd.log to verify the missing files were
>>actually
>> >>>>>>>>>>> healed.
>> >>>>>>>>>>>
>> >>>>>>>>>>> -b
>> >>>>>>>>>>>
>> >>>>>>>>>>> On Tue, Feb 3, 2015 at 5:37 PM, David F. Robinson
>> >>>>>>>>>>> <david.robinson at corvidtec.com
>> >>>>>>>>>>> <mailto:david.robinson at corvidtec.com>>
>> >>>>>>>>>>> wrote:
>> >>>>>>>>>>>
>> >>>>>>>>>>> I rsync'd 20-TB over to my gluster system and noticed
>>that I
>> >>>>>>>>>>> had
>> >>>>>>>>>>> some directories missing even though the rsync completed
>> >>>>>>>>>>> normally.
>> >>>>>>>>>>> The rsync logs showed that the missing files were
>>transferred.
>> >>>>>>>>>>> I went to the bricks and did an 'ls -al
>> >>>>>>>>>>> /data/brick*/homegfs/dir/*' the files were on the
>>bricks.
>> >>>>>>>>>>> After I
>> >>>>>>>>>>> did this 'ls', the files then showed up on the FUSE
>>mounts.
>> >>>>>>>>>>> 1) Why are the files hidden on the fuse mount?
>> >>>>>>>>>>> 2) Why does the ls make them show up on the FUSE mount?
>> >>>>>>>>>>> 3) How can I prevent this from happening again?
>> >>>>>>>>>>> Note, I also mounted the gluster volume using NFS and
>>saw the
>> >>>>>>>>>>> same
>> >>>>>>>>>>> behavior. The files/directories were not shown until I
>>did the
>> >>>>>>>>>>> "ls" on the bricks.
>> >>>>>>>>>>> David
>> >>>>>>>>>>> ===============================
>> >>>>>>>>>>> David F. Robinson, Ph.D.
>> >>>>>>>>>>> President - Corvid Technologies
>> >>>>>>>>>>> 704.799.6944 x101 <tel:704.799.6944%20x101> [office]
>> >>>>>>>>>>> 704.252.1310 <tel:704.252.1310> [cell]
>> >>>>>>>>>>> 704.799.7974 <tel:704.799.7974> [fax]
>> >>>>>>>>>>> David.Robinson at corvidtec.com
>> >>>>>>>>>>> <mailto:David.Robinson at corvidtec.com>
>> >>>>>>>>>>> http://www.corvidtechnologies.com
>> >>>>>>>>>>> <http://www.corvidtechnologies.com/>
>> >>>>>>>>>>>
>> >>>>>>>>>>> _______________________________________________
>> >>>>>>>>>>> Gluster-devel mailing list
>> >>>>>>>>>>> Gluster-devel at gluster.org
>><mailto:Gluster-devel at gluster.org>
>> >>>>>>>>>>> http://www.gluster.org/mailman/listinfo/gluster-devel
>> >>>>>>>>>>
>> >>>>>>>>>>
>> >>>>>>>>>> _______________________________________________
>> >>>>>>>>>> Gluster-devel mailing list
>> >>>>>>>>>> Gluster-devel at gluster.org
>> >>>>>>>>>> http://www.gluster.org/mailman/listinfo/gluster-devel
>> >>>>>>
>> >>>>>> _______________________________________________
>> >>>>>> Gluster-users mailing list
>> >>>>>> Gluster-users at gluster.org
>> >>>>>> http://www.gluster.org/mailman/listinfo/gluster-users
>> >>>>>
>> >>>>> _______________________________________________
>> >>>>> Gluster-users mailing list
>> >>>>> Gluster-users at gluster.org
>> >>>>> http://www.gluster.org/mailman/listinfo/gluster-users
>> >>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20150206/1106d3fd/attachment.html>
More information about the Gluster-users
mailing list