[Gluster-users] glusterfsd not starting at boot with Debian 7

[ML mail]

Dear Pranith

As asked you will find below the glusterd logfile including the log entries at the boot of the server. On Debian the logfile is located in the /var/log/glusterfs/etc-glusterfs-glusterd.vol.log file.


[2015-02-05 13:13:03.566059] I [glusterfsd.c:1959:main] 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.5.3 (/usr/sbin/glusterd -p /var/run/glusterd.pid)
[2015-02-05 13:13:03.580131] I [glusterd.c:1122:init] 0-management: Using /var/lib/glusterd as working directory
[2015-02-05 13:13:03.583040] I [socket.c:3645:socket_init] 0-socket.management: SSL support is NOT enabled
[2015-02-05 13:13:03.583060] I [socket.c:3660:socket_init] 0-socket.management: using system polling thread
[2015-02-05 13:13:03.585326] W [rdma.c:4194:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such device)
[2015-02-05 13:13:03.585343] E [rdma.c:4482:init] 0-rdma.management: Failed to initialize IB Device
[2015-02-05 13:13:03.585350] E [rpc-transport.c:333:rpc_transport_load] 0-rpc-transport: 'rdma' initialization failed
[2015-02-05 13:13:03.585392] W [rpcsvc.c:1535:rpcsvc_transport_create] 0-rpc-service: cannot create listener, initing the transport failed
[2015-02-05 13:13:03.585446] I [socket.c:3645:socket_init] 0-socket.management: SSL support is NOT enabled
[2015-02-05 13:13:03.585454] I [socket.c:3660:socket_init] 0-socket.management: using system polling thread
[2015-02-05 13:13:06.111967] I [glusterd-store.c:1421:glusterd_restore_op_version] 0-glusterd: retrieved op-version: 30501
[2015-02-05 13:13:06.114871] E [glusterd-store.c:1979:glusterd_store_retrieve_volume] 0-: Unknown key: brick-0
[2015-02-05 13:13:06.277826] I [glusterd.c:138:glusterd_uuid_init] 0-management: retrieved UUID: 459ca0c5-8400-4392-9846-fcef98772f44
Final graph:
+------------------------------------------------------------------------------+
1: volume management
2:     type mgmt/glusterd
3:     option rpc-auth.auth-glusterfs on
4:     option rpc-auth.auth-unix on
5:     option rpc-auth.auth-null on
6:     option transport.socket.listen-backlog 128
7:     option rpc-auth-allow-insecure on
8:     option transport.socket.read-fail-log off
9:     option transport.socket.keepalive-interval 2
10:     option transport.socket.keepalive-time 10
11:     option transport-type rdma
12:     option working-directory /var/lib/glusterd
13: end-volume
14:
+------------------------------------------------------------------------------+
[2015-02-05 13:13:06.281802] I [rpc-clnt.c:972:rpc_clnt_connection_init] 0-management: setting frame-timeout to 600
[2015-02-05 13:13:06.281889] I [socket.c:3645:socket_init] 0-management: SSL support is NOT enabled
[2015-02-05 13:13:06.281902] I [socket.c:3660:socket_init] 0-management: using system polling thread
[2015-02-05 13:13:06.282359] I [socket.c:2321:socket_event_handler] 0-transport: disconnecting now
[2015-02-05 13:13:06.285676] I [rpc-clnt.c:972:rpc_clnt_connection_init] 0-management: setting frame-timeout to 600
[2015-02-05 13:13:06.285770] I [socket.c:3645:socket_init] 0-management: SSL support is NOT enabled
[2015-02-05 13:13:06.285786] I [socket.c:3660:socket_init] 0-management: using system polling thread
[2015-02-05 13:13:06.285982] I [glusterd-handler.c:3713:__glusterd_brick_rpc_notify] 0-management: Disconnected from gfs1a:/data/myvol/brick
[2015-02-05 13:13:06.286042] I [socket.c:2321:socket_event_handler] 0-transport: disconnecting now





On Thursday, February 5, 2015 12:02 PM, Pranith Kumar Karampuri <pkarampu at redhat.com> wrote:

On 02/05/2015 04:08 AM, ML mail wrote:
> Hi,
>
> I have installed Gluster 3.5.3 on Debian 7 and have one single test volume right now. Unfortunately after a reboot this volume does not get get started automatically: the glusterfsd process for that volume is inexistant although the glusterd process is running.
>
>
> After a boot running "gluster volume status" shows:
> Status of volume: myvol
> Gluster process                        Port    Online    Pid
> ------------------------------------------------------------------------------
> Brick gfs1a:/data/myvol/brick                N/A    N    N/A
>
> Task Status of Volume myvol
> ------------------------------------------------------------------------------
>
> There are no active volume tasks
>
> as you can see all N/A there. In order to make it work I have to run "gluster volume stop myvol" and "gluster volume start myvol". Then it is ready and working. What could the problem be? Is the init.d startup srcript on Debian 7 buggy?
If glusterd is starting then there shouldn't be any bug in the init 
scripts. Could you attach the log file of glusterd? I am not sure where 
it is stored in debian may be /var/log/glusterfs or 
/usr/local/var/log/glusterfs it will have glusterd in the name of the file.

Pranith

>
> Best regards
> ML
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-users