[Gluster-users] Shared IP address
Alex Crow
acrow at integrafin.co.uk
Thu Apr 30 17:05:26 UTC 2015
HI,
Are your PUBLIC_ADDRESSES different from the NODES addresses (they must
not be used on any real interface)? Is the /mnt/datavol mounted on all
nodes?
I also found I had to copy /var/lib/samba/private/* to the
/mnt/datavol/lock area to get samba working.
Cheers
Alex
On 30/04/15 17:55, Sharad Shukla wrote:
> Hi Alex and friends,
>
> I have installed CTDB and all related packages . I did all the
> required steps to configure ctdb and samba configuration, but somehow
> the lockfile functionality does not work.
>
>
> /Following is the ctdb configuration:/
> CTDB_RECOVERY_LOCK="/mnt/datavaol/lock/lockfile"
> CTDB_PUBLIC_ADDRESSES=/etc/ctdb/public_addresses
> CTDB_MANAGES_SAMBA=yes
> CTDB_NODES=/etc/ctdb/nodes
>
>
> Having the above config I was getting the error "Unable to find
> lockfile". So the problem was with CTDB_RECOVERY_LOCK, so I commented
> it. After this I again started ctdb services but now the Samba
> starting was a big problem.... I was getting the following error:
> Starting SMB services: /bin/bash: line 1: 4339
> Aborted (core dumped) smbd -D
>
> /Following is the smb.conf:/
> [global]
> clustering = yes
> idmap backend = tdb2
> private dir = /mnt/datavol/lock
>
> [share]
> comment = Gluster and CTDB based shared volume
> path = /mnt/datavol/share
> read only = no
> guest ok = yes
>
>
> I tried every possible way to start Samba daemon but failed to do so ..
>
> I would really appreciate if you can look into this configuration and
> suggest me some tips to make ctdb running without any errors..
>
> Thanks & Regards
> Sharad
>
>
>
>
>
>
> On Wed, Apr 29, 2015 at 11:45 AM, Alex Crow <acrow at integrafin.co.uk
> <mailto:acrow at integrafin.co.uk>> wrote:
>
>
>
> On 29/04/15 10:34, Sharad Shukla wrote:
>> Hi Susant,
>>
>> I have installed Glusterfs in 2 machines which I want to use for
>> establishing cluster. I am using CentOs 6.6. The gluster volume
>> is set up and running fine. I am manually creating the files onto
>> the mounted volume and they are replicating..
>>
>> So far looks like everything is working. Now I have configured a
>> shared ip address for reaching the replicated volume by using the
>> following command:
>>
>> gluster volume set[VOLUME]auth.allow[IP ADDRESS]
>>
>> This IP address is visible to me under "gluster volume info", but
>> I am unable to ping this ip address. I am getting the message
>> that "Host is unreachable"
>>
>> I need this ip address reachable so that I can connect my
>> application which needs to use this shared ip to connect to cluster.
>>
>> This application is a little urgent for me. I would really
>> appreciate your help..
>>
>> Thanks
>> Sharad
>
> Hi,
>
> That command is just setting an acl for that IP to connect to the
> gluster daemon.
>
> Normally you don't need to add any IP addresses as glusterfs
> clients will know about both servers as soon as they connect to
> one of them. If you're using Samba or NFS the preferred option is
> to use CTDB to spread a pool of virtual IP addresses over the servers.
>
> Cheers
>
> Alex
>
>>
>>
>> --
>> This message has been scanned for viruses and
>> dangerous content by *MailScanner*
>> <http://www.mailscanner.info/>, and is
>> believed to be clean.
>>
>>
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.org <mailto:Gluster-users at gluster.org>
>> http://www.gluster.org/mailman/listinfo/gluster-users
>
> --
> This message is intended only for the addressee and may contain
> confidential information. Unless you are that person, you may not
> disclose its contents or use it in any way and are requested to delete
> the message along with any attachments and notify us immediately.
> "Transact" is operated by Integrated Financial Arrangements plc. 29
> Clement's Lane, London EC4N 7AE. Tel: (020) 7608 4900 Fax: (020) 7608
> 5300. (Registered office: as above; Registered in England and Wales
> under number: 3727592). Authorised and regulated by the Financial
> Conduct Authority (entered on the Financial Services Register; no. 190856).
>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org <mailto:Gluster-users at gluster.org>
> http://www.gluster.org/mailman/listinfo/gluster-users
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
> believed to be clean.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.gluster.org/pipermail/gluster-users/attachments/20150430/fc3f0c8e/attachment.html>
More information about the Gluster-users
mailing list