[Gluster-users] Disastrous performance with rsync to mounted Gluster volume.
Ben Turner
bturner at redhat.com
Mon Apr 27 21:56:02 UTC 2015
----- Original Message -----
> From: "David Robinson" <david.robinson at corvidtec.com>
> To: "Ben Turner" <bturner at redhat.com>, "Ernie Dunbar" <maillist at lightspeed.ca>
> Cc: "Gluster Users" <gluster-users at gluster.org>
> Sent: Monday, April 27, 2015 5:21:08 PM
> Subject: Re[2]: [Gluster-users] Disastrous performance with rsync to mounted Gluster volume.
>
> I am also having a terrible time with rsync and gluster. The vast
> majority of my time is spent figuring out what to sync... This sync
> takes 17-hours even though very little data is being transferred.
>
> sent 120,523 bytes received 74,485,191,265 bytes 1,210,720.02
> bytes/sec
> total size is 27,589,660,889,910 speedup is 370.40
>
Maybe we could try something to confirm / deny my theory. What about asking rsync to ignore anything that could differ between bricks in a replicated pair. A couple options I see are:
--size-only means that rsync will skip files that match in size, even if the timestamps differ. This means it will synchronise less files than the default behaviour. It will miss any file with changes that don't affect the overall file size.
--ignore-times means that rsync will checksum every file, even if the timestamps and file sizes match. This means it will synchronise more files than the default behaviour. It will include changes to files even where the file size is the same and the modification date/time has been reset to the original value (resetting the date/time is unlikely to be done in practise, but it could happen).
These may also help, but it looks more to be for recovering from brick failures:
http://blog.gluster.org/category/rsync/
https://mjanja.ch/2014/07/parallelizing-rsync/?utm_source=rss&utm_medium=rss&utm_campaign=parallelizing-rsync#sync_brick
I'll try some stuff in the lab and see if I can come up with RCA or something that helps.
-b
>
> ------ Original Message ------
> From: "Ben Turner" <bturner at redhat.com>
> To: "Ernie Dunbar" <maillist at lightspeed.ca>
> Cc: "Gluster Users" <gluster-users at gluster.org>
> Sent: 4/27/2015 4:52:35 PM
> Subject: Re: [Gluster-users] Disastrous performance with rsync to
> mounted Gluster volume.
>
> >----- Original Message -----
> >> From: "Ernie Dunbar" <maillist at lightspeed.ca>
> >> To: "Gluster Users" <gluster-users at gluster.org>
> >> Sent: Monday, April 27, 2015 4:24:56 PM
> >> Subject: Re: [Gluster-users] Disastrous performance with rsync to
> >>mounted Gluster volume.
> >>
> >> On 2015-04-24 11:43, Joe Julian wrote:
> >>
> >> >> This should get you where you need to be. Before you start to
> >>migrate
> >> >> the data maybe do a couple DDs and send me the output so we can
> >>get an
> >> >> idea of how your cluster performs:
> >> >>
> >> >> time `dd if=/dev/zero of=<gluster-mount>/myfile bs=1024k
> >>count=1000;
> >> >> sync`
> >> >> echo 3 > /proc/sys/vm/drop_caches
> >> >> dd if=<gluster mount> of=/dev/null bs=1024k count=1000
> >> >>
> >> >> If you are using gigabit and glusterfs mounts with replica 2 you
> >> >> should get ~55 MB / sec writes and ~110 MB / sec reads. With NFS
> >>you
> >> >> will take a bit of a hit since NFS doesnt know where files live
> >>like
> >> >> glusterfs does.
> >>
> >> After copying our data and doing a couple of very slow rsyncs, I did
> >> your speed test and came back with these results:
> >>
> >> 1048576 bytes (1.0 MB) copied, 0.0307951 s, 34.1 MB/s
> >> root at backup:/home/webmailbak# dd if=/dev/zero of=/mnt/testfile
> >> count=1024 bs=1024; sync
> >> 1024+0 records in
> >> 1024+0 records out
> >> 1048576 bytes (1.0 MB) copied, 0.0298592 s, 35.1 MB/s
> >> root at backup:/home/webmailbak# dd if=/dev/zero of=/mnt/testfile
> >> count=1024 bs=1024; sync
> >> 1024+0 records in
> >> 1024+0 records out
> >> 1048576 bytes (1.0 MB) copied, 0.0501495 s, 20.9 MB/s
> >> root at backup:/home/webmailbak# echo 3 > /proc/sys/vm/drop_caches
> >> root at backup:/home/webmailbak# # dd if=/mnt/testfile of=/dev/null
> >> bs=1024k count=1000
> >> 1+0 records in
> >> 1+0 records out
> >> 1048576 bytes (1.0 MB) copied, 0.0124498 s, 84.2 MB/s
> >>
> >>
> >> Keep in mind that this is an NFS share over the network.
> >>
> >> I've also noticed that if I increase the count of those writes, the
> >> transfer speed increases as well:
> >>
> >> 2097152 bytes (2.1 MB) copied, 0.036291 s, 57.8 MB/s
> >> root at backup:/home/webmailbak# dd if=/dev/zero of=/mnt/testfile
> >> count=2048 bs=1024; sync
> >> 2048+0 records in
> >> 2048+0 records out
> >> 2097152 bytes (2.1 MB) copied, 0.0362724 s, 57.8 MB/s
> >> root at backup:/home/webmailbak# dd if=/dev/zero of=/mnt/testfile
> >> count=2048 bs=1024; sync
> >> 2048+0 records in
> >> 2048+0 records out
> >> 2097152 bytes (2.1 MB) copied, 0.0360319 s, 58.2 MB/s
> >> root at backup:/home/webmailbak# dd if=/dev/zero of=/mnt/testfile
> >> count=10240 bs=1024; sync
> >> 10240+0 records in
> >> 10240+0 records out
> >> 10485760 bytes (10 MB) copied, 0.127219 s, 82.4 MB/s
> >> root at backup:/home/webmailbak# dd if=/dev/zero of=/mnt/testfile
> >> count=10240 bs=1024; sync
> >> 10240+0 records in
> >> 10240+0 records out
> >> 10485760 bytes (10 MB) copied, 0.128671 s, 81.5 MB/s
> >
> >This is correct, there is overhead that happens with small files and
> >the smaller the file the less throughput you get. That said, since
> >files are smaller you should get more files / second but less MB /
> >second. I have found that when you go under 16k changing files size
> >doesn't matter, you will get the same number of 16k files / second as
> >you do 1 k files.
> >
> >>
> >>
> >> However, the biggest stumbling block for rsync seems to be changes to
> >> directories. I'm unsure about what exactly it's doing (probably
> >>changing
> >> last access times?) but these minor writes seem to take a very long
> >>time
> >> when normally they would not. Actual file copies (as in the very
> >>files
> >> that are actually new within those same directories) appear to take
> >> quite a lot less time than the directory updates.
> >
> >Dragons be here! Access time is not kept in sync across the
> >replicas(IIRC, someone correct me if I am wrong!) and each time a dir
> >is read from a different brick I bet the access time is different.
> >
> >>
> >> For example:
> >>
> >> # time rsync -av --inplace --whole-file --ignore-existing
> >>--delete-after
> >> gromm/* /mnt/gromm/
> >> building file list ... done
> >> Maildir/ ## This part takes a long time.
> >> Maildir/.INBOX.Trash/
> >> Maildir/.INBOX.Trash/cur/
> >>
> >>Maildir/.INBOX.Trash/cur/1429836077.H817602P21531.pop.lightspeed.ca:2,S
> >> Maildir/.INBOX.Trash/tmp/ ## The previous three lines took
> >>nearly
> >> no time at all.
> >> Maildir/cur/ ## This takes a long time.
> >> Maildir/cur/1430160436.H952679P13870.pop.lightspeed.ca:2,S
> >> Maildir/new/
> >> Maildir/tmp/ ## The previous lines again take no
> >>time
> >> at all.
> >> deleting Maildir/cur/1429836077.H817602P21531.pop.lightspeed.ca:2,S
> >> ## This delete did take a while.
> >> sent 1327634 bytes received 75 bytes 59009.29 bytes/sec
> >> total size is 624491648 speedup is 470.35
> >>
> >> real 0m26.110s
> >> user 0m0.140s
> >> sys 0m1.596s
> >>
> >>
> >> So, rsync reports that it wrote 1327634 bytes at 59 kBytes/sec, and
> >>the
> >> whole operation took 26 seconds. To write 2 files that were around
> >>20-30
> >> kBytes each and delete 1.
> >>
> >> The last rsync took around 56 minutes, when normally such an rsync
> >>would
> >> have taken 5-10 minutes, writing over the network via ssh.
> >
> >It may have something to do with the access times not being in sync
> >across replicated pairs. Maybe some has experience with this / could
> >this be tripping up rsync?
> >
> >-b
> >
> >> _______________________________________________
> >> Gluster-users mailing list
> >> Gluster-users at gluster.org
> >> http://www.gluster.org/mailman/listinfo/gluster-users
> >>
> >_______________________________________________
> >Gluster-users mailing list
> >Gluster-users at gluster.org
> >http://www.gluster.org/mailman/listinfo/gluster-users
>
>
More information about the Gluster-users
mailing list