[Gluster-users] Subject: "Accept Peer Request" state

[Cary Tsai]

I understand that.
Our application basically is one brick is doing write and others read.
And even 'write' is batch write. Not like the regular FS operations.
The data written to the mirror volume is very low.
The entire volume is 8GB (SSD) and only  on average 50  MBs per day that
kind of traffic.
Cary



On Mon, May 5, 2014 at 2:16 PM, James <purpleidea at gmail.com> wrote:

> On Mon, May 5, 2014 at 5:11 PM, Cary Tsai <f4lens at gmail.com> wrote:
> > I have 4 systems, us-east-1, us-east-2, us-west-1, and us-west-2.
> > From us-east-1, it sees us-east-2 state as :  Accepted peer request
> > (Connected)
> > But other systems sees it as "Peer in Cluster (Connected)"
> >
> > Due to us-east-2 is "  Accepted peer request " I cannot create a volume
> > using brick in us-east-2 on us-east-1.
> >
> > How do I make us-east-2 seen as "Peer in Cluster" in us-east-1?
> >
> > Thanks
>
> BTW, normal gluster mode isn't usually meant for "geo-distribution"...
> You might want to look at the geo-replication feature instead.
>
> HTH
>
> >
> > _______________________________________________
> > Gluster-users mailing list
> > Gluster-users at gluster.org
> > http://supercolony.gluster.org/mailman/listinfo/gluster-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20140505/88a7ca3e/attachment.html>