[Gluster-users] Unable to mount gfs gv0 volume Enterprise Linux Enterprise Linux Server release 5.6 (Carthage)
Ben Turner
bturner at redhat.com
Thu Jan 16 20:50:58 UTC 2014
----- Original Message -----
> From: "Lalatendu Mohanty" <lmohanty at redhat.com>
> To: "Jeffrey Brewster" <jab2805 at yahoo.com>, "Ben Turner" <bturner at redhat.com>
> Cc: gluster-users at gluster.org
> Sent: Thursday, January 16, 2014 3:26:51 PM
> Subject: Re: [Gluster-users] Unable to mount gfs gv0 volume Enterprise Linux Enterprise Linux Server release 5.6
> (Carthage)
>
> On 01/17/2014 01:49 AM, Jeffrey Brewster wrote:
> > Thanks! I will try on 6.4.
>
> Just checked my GlusterFS version , it is
> glusterfs-3.5.0qa3-1.el6.x86_64, I am in the process of updating it to
> beta1 . However I am positive that it would work with 3.4.2 also. Make
> sure you have covered selinux and iptables settings on your new set-up.
+1, thanks for jumping in lala. @Jeff sry for the delay got caught up in my day job.
-b
> -Lala
> >
> >
> > On Thursday, January 16, 2014 3:02 PM, Lalatendu Mohanty
> > <lmohanty at redhat.com> wrote:
> > On 01/16/2014 08:29 PM, Jeffrey Brewster wrote:
> >>
> >> Please find the packages I have installed. I have been using the
> >> quick start doc so I have been trying to mount locally. Do I need a
> >> 3.4.2 client rpm? I have not seen one.
> >>
> >>
> >
> > Jeffery,
> >
> > If you are trying to mount the volume locally on the gluster-node, you
> > dont need any extra client packages.
> >
> > I believe you are using**below link for the quick start guide. In the
> > guide, the recommended distribution for these steps to try is
> > Fedora20. I have tried the same steps on RHEL6.4 , it worked fine. My
> > guess is there might be a bug with with EL5. I don't have a EL5 handy
> > , hence couldn't test it.
> > *
> > *http://www.gluster.org/community/documentation/index.php/QuickStart
> >
> > -Lala
> >> host1:
> >>
> >> gluster packages installed:
> >>
> >> [root at gcvs0139 ~]# rpm -qa | grep gluster | cat -n
> >> 1 glusterfs-libs-3.4.2-1.el5
> >> 2 glusterfs-server-3.4.2-1.el5
> >> 3 glusterfs-3.4.2-1.el5
> >> 4 glusterfs-cli-3.4.2-1.el5
> >> 5 glusterfs-geo-replication-3.4.2-1.el5
> >> 6 glusterfs-fuse-3.4.2-1.el5
> >>
> >> selinux disabled:
> >>
> >> [root at gcvs0139 ~]# getenforce
> >> Disabled
> >> [root at gcvs0139 ~]#
> >>
> >>
> >>
> >>
> >>
> >>
> >> host 2: SAME
> >>
> >> [root at gcvs4056 glusterfs]# rpm -qa | grep gluster | cat -n
> >> 1 glusterfs-libs-3.4.2-1.el5
> >> 2 glusterfs-3.4.2-1.el5
> >> 3 glusterfs-cli-3.4.2-1.el5
> >> 4 glusterfs-geo-replication-3.4.2-1.el5
> >> 5 glusterfs-fuse-3.4.2-1.el5
> >> 6 glusterfs-server-3.4.2-1.el5
> >>
> >>
> >> [root at gcvs4056 glusterfs]# getenforce
> >> Disabled
> >> [root at gcvs4056 glusterfs]#
> >>
> >>
> >>
> >> On Thursday, January 16, 2014 12:37 AM, Lalatendu Mohanty
> >> <lmohanty at redhat.com> <mailto:lmohanty at redhat.com> wrote:
> >> On 01/16/2014 03:58 AM, Jeffrey Brewster wrote:
> >>>
> >>> I'm not sure why the mount is failing. I followed the quick start
> >>> guide...
> >>>
> >>>
> >>> Data:
> >>> --------------
> >>>
> >>>
> >>>
> >>> 1. Info check looks good
> >>> gluster volume info
> >>>
> >>> Volume Name: gv2
> >>> Type: Replicate
> >>> Volume ID: ca9f2409-3004-4287-af6f-1b455048710e
> >>> Status: Started
> >>> Number of Bricks: 1 x 2 = 2
> >>> Transport-type: tcp
> >>> Bricks:
> >>> Brick1: gcvs0139:/data/gv0/brick1/app
> >>> Brick2: gcvs4056:/data/gv0/brick2/app1
> >>>
> >>>
> >>> 2. Status looks good
> >>>
> >>> gluster volume status
> >>>
> >>> Status of volume: gv2
> >>> Gluster process Port Online
> >>> Pid
> >>> ------------------------------------------------------------------------------
> >>> Brick gcvs0139:/data/gv0/brick1/app 49152 Y
> >>> 7648
> >>> Brick gcvs4056:/data/gv0/brick2/app1 49152 Y
> >>> 12005
> >>> NFS Server on localhost 2049 Y
> >>> 12017
> >>> Self-heal Daemon on localhost N/A Y
> >>> 12021
> >>> NFS Server on gcvs0139 2049 Y
> >>> 7660
> >>> Self-heal Daemon on gcvs0139 N/A Y
> >>> 7664
> >>>
> >>> There are no active volume tasks
> >>>
> >>>
> >>> 3. peer check looks good
> >>>
> >>> [root at gcvs4056 /]# gluster peer probe gcvs0139
> >>> peer probe: success: host gcvs0139 port 24007 already in peer list
> >>> [root at gcvs4056 /]#
> >>>
> >>>
> >>>
> >>> 4. mount fails
> >>>
> >>> [root at gcvs4056 /]# mount -t glusterfs gcvs4056:/gv2 /mnt
> >>> Mount failed. Please check the log file for more details.
> >>> [root at gcvs4056 /]#
> >>>
> >>>
> >>> 5. mount log
> >>>
> >>> From the mnt.log:
> >>> -------------
> >>>
> >>>
> >>> [2014-01-15 22:19:57.751543] I [afr-common.c:3698:afr_notify]
> >>> 0-gv2-replicate-0: Subvolume 'gv2-client-1' came back up; going online.
> >>> [2014-01-15 22:19:57.751614] I [rpc-clnt.c:1676:rpc_clnt_reconfig]
> >>> 0-gv2-client-0: changing port to
> >>> 49152 (from 0)
> >>> [2014-01-15 22:19:57.751675] I
> >>> [client-handshake.c:450:client_set_lk_version_cbk] 0-gv2-client-1:
> >>> Server lk version = 1
> >>> [2014-01-15 22:19:57.751712] W [socket.c:514:__socket_rwv]
> >>> 0-gv2-client-0: readv failed (No data available)
> >>> [2014-01-15 22:19:57.759041] W
> >>> [common-utils.c:2247:gf_get_reserved_ports] 0-glusterfs: could not open
> >>> the file /proc/sys/net/ipv4/ip_local_reserved_ports for getting reserved
> >>> ports info (No such file or directory)
> >>> [2014-01-15 22:19:57.759080] W
> >>> [common-utils.c:2280:gf_process_reserved_ports] 0-glusterfs: Not able to
> >>> get reserved ports, hence there is a possibility that glusterfs may
> >>> consume reserved port
> >>> [2014-01-15 22:19:57.762259] I
> >>> [client-handshake.c:1659:select_server_supported_programs]
> >>> 0-gv2-client-0: Using Program GlusterFS 3.3, Num (1298437), Version
> >>> (330)
> >>> [2014-01-15 22:19:57.762974] I
> >>> [client-handshake.c:1456:client_setvolume_cbk] 0-gv2-client-0: Connected
> >>> to 10.131.83.139:49152,
> >>> attached to remote volume '/data/gv0/brick1/app'.
> >>> [2014-01-15 22:19:57.763008] I
> >>> [client-handshake.c:1468:client_setvolume_cbk] 0-gv2-client-0: Server
> >>> and Client lk-version numbers are not same, reopening the fds
> >>> [2014-01-15 22:19:57.775406] I [fuse-bridge.c:4769:fuse_graph_setup]
> >>> 0-fuse: switched to graph 0
> >>> [2014-01-15 22:19:57.775695] I
> >>> [client-handshake.c:450:client_set_lk_version_cbk] 0-gv2-client-0:
> >>> Server lk version = 1
> >>> [2014-01-15 22:19:57.779538] I [fuse-bridge.c:4628:fuse_thread_proc]
> >>> 0-fuse: unmounting /mnt
> >>> [2014-01-15 22:19:57.780102] W [glusterfsd.c:1002:cleanup_and_exit]
> >>> (-->/lib64/libc.so.6(clone+0x6d) [0x31f6ad40cd]
> >>> (-->/lib64/libpthread.so.0 [0x31f7e0673d]
> >>> (-->/usr/sbin/glusterfs(glusterfs_sigwaiter+0x138) [0x405328]))) 0-:
> >>> received signum (15), shutting down
> >>> [2014-01-15 22:19:57.780206] I [fuse-bridge.c:5260:fini] 0-fuse:
> >>> Unmounting '/mnt'.
> >>>
> >>>
> >>>
> >>>
> >>> On Tuesday, January 14, 2014 5:12 PM, Jeffrey Brewster
> >>> <jab2805 at yahoo.com> <mailto:jab2805 at yahoo.com> wrote:
> >>>
> >>> Hi Ben,
> >>>
> >>> 1. Port 24007 is open and all iptable rules have been flushed:
> >>>
> >>> [root at gcvs4056 run]# telnet gcvs0139 24007
> >>> Trying 10.131.83.139...
> >>> Connected to gcvs0139.
> >>> Escape character is '^]'.
> >>>
> >>>
> >>> 2. gluster peer status looks good from both boxes:
> >>>
> >>> box1
> >>> [root at gcvs4056 run]# gluster peer status
> >>> Number of Peers: 1
> >>>
> >>> Hostname: gcvs0139
> >>> Uuid: d40ba14d-cbb4-40e7-86a2-62afaa99af4d
> >>> State: Peer in Cluster (Connected)
> >>>
> >>> box 2:
> >>>
> >>>
> >>> # gluster peer status
> >>> Number of Peers: 1
> >>>
> >>> Hostname: gcvs4056
> >>> Port: 24007
> >>> Uuid: b1aae40a-78be-4303-bf48-49fb41d6bb30
> >>> State: Peer in Cluster (Connected)
> >>>
> >>> 3. selinux is disabled on both boxes.
> >>>
> >>> grep dis /etc/sysconfig/selinux
> >>> # disabled - No SELinux policy is loaded.
> >>> SELINUX=disabled
> >>>
> >>>
> >>
> >> I can see that selinux is disabled in the config file, but this does
> >> not come in to effect unless you reboot the server. Check the current
> >> status of selinux i.e. run "getenforce" .
> >>
> >> Also what gluster packages are installed on the client side?
> >>
> >>>
> >>> Thanks for your help!
> >>>
> >>>
> >>>
> >>> On Tuesday, January 14, 2014 4:54 PM, Ben Turner
> >>> <bturner at redhat.com> <mailto:bturner at redhat.com> wrote:
> >>> ----- Original Message -----
> >>> > From: "Jeffrey Brewster" <jab2805 at yahoo.com
> >>> <mailto:jab2805 at yahoo.com>>
> >>> > To: "Ben Turner" <bturner at redhat.com <mailto:bturner at redhat.com>>
> >>> > Cc: gluster-users at gluster.org <mailto:gluster-users at gluster.org>
> >>> > Sent: Tuesday, January 14, 2014 4:35:30 PM
> >>> > Subject: Re: [Gluster-users] Unable to mount gfs gv0 volume
> >>> Enterprise Linux Enterprise Linux Server release 5.6
> >>> > (Carthage)
> >>> >
> >>> > Hi Ben,
> >>> >
> >>> >
> >>> >
> >>> >
> >>> > I don't have any "E" (error I assume) lines in the mnt.log file. I
> >>> check all
> >>> > the log files in the /var/log/glusterfs/ dir. I restarted
> >>> glusterd to see
> >>> > if I could see any errors.
> >>> >
> >>>
> >>> Make sure SELinux is disabled and your firewall is open to allow
> >>> gluster traffic. Have a look at:
> >>>
> >>> http://www.gluster.org/community/documentation/index.php/Basic_Gluster_Troubleshooting
> >>>
> >>> For what ports you need open. As a test I would just try disabling
> >>> iptables and adding in the rules after you confirm it is working.
> >>>
> >>> -b
> >>>
> >>>
> >>> >
> >>> >
> >>> >
> >>> >
> >>> > Data:
> >>> >
> >>> >
> >>> >
> >>> > Warnings from mount log:
> >>> > -------------
> >>> >
> >>> > # grep W mnt.log | cat -n
> >>> >
> >>> >
> >>> > 1 [2014-01-14
> >>> > 19:32:22.920069] W [common-utils.c:2247:gf_get_reserved_ports]
> >>> > 0-glusterfs: could not open the file
> >>> > /proc/sys/net/ipv4/ip_local_reserved_ports for getting reserv
> >>> >
> >>> > 2 [2014-01-14 19:32:22.920108] W
> >>> > [common-utils.c:2280:gf_process_reserved_ports] 0-glusterfs: Not
> >>> able to
> >>> > get reserved ports, hence there is a possibility that glusterfs may c
> >>> >
> >>> > 3 [2014-01-14 19:32:22.935611] W
> >>> > [common-utils.c:2247:gf_get_reserved_ports] 0-glusterfs: could not
> >>> open
> >>> > the file /proc/sys/net/ipv4/ip_local_reserved_ports for getting reserv
> >>> >
> >>> > 4 [2014-01-14 19:32:22.935646] W
> >>> > [common-utils.c:2280:gf_process_reserved_ports] 0-glusterfs: Not
> >>> able to
> >>> > get reserved ports, hence there is a possibility that glusterfs may c
> >>> >
> >>> > 5 [2014-01-14 19:32:22.938783] W
> >>> > [common-utils.c:2247:gf_get_reserved_ports] 0-glusterfs: could not
> >>> open
> >>> > the file /proc/sys/net/ipv4/ip_local_reserved_ports for getting
> >>> reserv
> >>> >
> >>> > 6 [2014-01-14 19:32:22.938826] W
> >>> > [common-utils.c:2280:gf_process_reserved_ports] 0-glusterfs: Not
> >>> able to
> >>> > get reserved ports, hence there is a possibility that glusterfs may c
> >>> > 7 [2014-01-14 19:32:22.941076] W [socket.c:514:__socket_rwv]
> >>> > 0-gv0-client-1: readv failed (No data available)
> >>> >
> >>> > 8 [2014-01-14 19:32:22.945278] W
> >>> > [common-utils.c:2247:gf_get_reserved_ports] 0-glusterfs: could not
> >>> open
> >>> > the file /proc/sys/net/ipv4/ip_local_reserved_ports for getting reserv
> >>> >
> >>> > 9 [2014-01-14 19:32:22.945312] W
> >>> > [common-utils.c:2280:gf_process_reserved_ports] 0-glusterfs: Not
> >>> able to
> >>> > get reserved ports, hence there is a possibility that glusterfs may c
> >>> > 10 [2014-01-14
> >>> > 19:32:22.946921] W [socket.c:514:__socket_rwv] 0-gv0-client-0:
> >>> readv failed
> >>> > (No data available)
> >>> >
> >>> > 11 [2014-01-14 19:32:22.953383] W
> >>> > [common-utils.c:2247:gf_get_reserved_ports] 0-glusterfs: could not
> >>> open
> >>> > the file /proc/sys/net/ipv4/ip_local_reserved_ports for getting reserv
> >>> >
> >>> > 12 [2014-01-14 19:32:22.953423] W
> >>> > [common-utils.c:2280:gf_process_reserved_ports] 0-glusterfs: Not
> >>> able to
> >>> > get reserved ports, hence there is a possibility that glusterfs may c
> >>> >
> >>> > 13 [2014-01-14 19:32:22.976633] W
> >>> [glusterfsd.c:1002:cleanup_and_exit]
> >>> > (-->/lib64/libc.so.6(clone+0x6d) [0x31f6ad40cd]
> >>> > (-->/lib64/libpthread.so.0 [0x
> >>> >
> >>> >
> >>> >
> >>> >
> >>> >
> >>> >
> >>> >
> >>> >
> >>> >
> >>> > After restarting glusterd:
> >>> > -----------------------------
> >>> >
> >>> >
> >>> > # grep E * | grep 21:25| cat -n
> >>> >
> >>> >
> >>> > 1 etc-glusterfs-glusterd.vol.log:[2014-01-14 21:25:47.637082] E
> >>> > [rpc-transport.c:253:rpc_transport_load] 0-rpc-transport:
> >>> > /usr/lib64/glusterfs/3.4.2/rpc-transport/rdma.so: cannot open shared
> >>> > object file: No such file or directory
> >>> > 2 etc-glusterfs-glusterd.vol.log:[2014-01-14 21:25:49.940650] E
> >>> > [glusterd-store.c:1858:glusterd_store_retrieve_volume] 0-: Unknown
> >>> key:
> >>> > brick-0
> >>> > 3 etc-glusterfs-glusterd.vol.log:[2014-01-14 21:25:49.940698] E
> >>> > [glusterd-store.c:1858:glusterd_store_retrieve_volume] 0-: Unknown
> >>> key:
> >>> > brick-1
> >>> > 4 etc-glusterfs-glusterd.vol.log:[2014-01-14 21:25:52.075563] E
> >>> > [glusterd-utils.c:3801:glusterd_nodesvc_unlink_socket_file]
> >>> > 0-management: Failed to remove
> >>> > /var/run/3096dde11d292c28c8c2f97101c272e8.socket error: Resource
> >>> > temporarily unavailable
> >>> > 5 etc-glusterfs-glusterd.vol.log:[2014-01-14 21:25:53.084722] E
> >>> > [glusterd-utils.c:3801:glusterd_nodesvc_unlink_socket_file]
> >>> > 0-management: Failed to remove
> >>> > /var/run/15f2dcd004edbff6ab31364853d6b6b0.socket error: No such
> >>> file or
> >>> > directory
> >>> > 6 glustershd.log:[2014-01-14 21:25:42.392401] W
> >>> > [socket.c:1962:__socket_proto_state_machine] 0-glusterfs: reading from
> >>> > socket failed. Error (No data available), peer (127.0.0.1:24007)
> >>> > 7 glustershd.log:[2014-01-14 21:25:53.476026] E
> >>> > [afr-self-heald.c:1067:afr_find_child_position] 0-gv0-replicate-0:
> >>> > getxattr failed on gv0-client-0 - (Transport endpoint is not
> >>> connected)
> >>> > 8 nfs.log:[2014-01-14 21:25:42.391560] W
> >>> > [socket.c:1962:__socket_proto_state_machine] 0-glusterfs: reading from
> >>> > socket failed. Error (No data available), peer (127.0.0.1:24007)
> >>> >
> >>> >
> >>> >
> >>> >
> >>> > Procs After restrt:
> >>> >
> >>> >
> >>> > ps -ef | grep gluster
> >>> > root 6345 1 0 18:35 ? 00:00:00 /usr/sbin/glusterfsd -s
> >>> > gcvs4056 --volfile-id gv0.gcvs4056.data-gv0-brick1-app -p
> >>> > /var/lib/glusterd/vols/gv0/run/gcvs4056-data-gv0-brick1-app.pid -S
> >>> > /var/run/f2339d9fa145fd28662d8b970fbd4aab.socket --brick-name
> >>> > /data/gv0/brick1/app -l
> >>> /var/log/glusterfs/bricks/data-gv0-brick1-app.log
> >>> > --xlator-option
> >>> *-posix.glusterd-uuid=b1aae40a-78be-4303-bf48-49fb41d6bb30
> >>> > --brick-port 49153 --xlator-option gv0-server.listen-port=49153
> >>> > root 7240 1 0 21:25 ? 00:00:00 /usr/sbin/glusterd
> >>> > --pid-file=/var/run/glusterd.pid
> >>> > root 7266 1 0 21:25 ? 00:00:00 /usr/sbin/glusterfs -s
> >>> > localhost --volfile-id gluster/nfs -p
> >>> /var/lib/glusterd/nfs/run/nfs.pid -l
> >>> > /var/log/glusterfs/nfs.log -S
> >>> > /var/run/3096dde11d292c28c8c2f97101c272e8.socket
> >>> > root 7273 1 0 21:25 ? 00:00:00 /usr/sbin/glusterfs -s
> >>> > localhost --volfile-id gluster/glustershd -p
> >>> > /var/lib/glusterd/glustershd/run/glustershd.pid -l
> >>> > /var/log/glusterfs/glustershd.log -S
> >>> > /var/run/15f2dcd004edbff6ab31364853d6b6b0.socket --xlator-option
> >>> > *replicate*.node-uuid=b1aae40a-78be-4303-bf48-49fb41d6bb30
> >>> > root 7331 5375 0 21:34 pts/1 00:00:00 grep gluster
> >>> >
> >>> >
> >>> >
> >>> >
> >>> >
> >>> >
> >>> >
> >>> > On Tuesday, January 14, 2014 4:08 PM, Ben Turner
> >>> <bturner at redhat.com <mailto:bturner at redhat.com>> wrote:
> >>> >
> >>> > ----- Original Message -----
> >>> > > From: "Jeffrey Brewster" <jab2805 at yahoo.com
> >>> <mailto:jab2805 at yahoo.com>>
> >>> > > To: "Ben Turner" <bturner at redhat.com <mailto:bturner at redhat.com>>
> >>> > > Cc: gluster-users at gluster.org <mailto:gluster-users at gluster.org>
> >>> > > Sent: Tuesday, January 14, 2014 3:57:24 PM
> >>> > > Subject: Re: [Gluster-users] Unable to mount gfs gv0 volume
> >>> Enterprise
> >>> > > Linux Enterprise Linux Server release 5.6
> >>> > > (Carthage)
> >>> > >
> >>> > > Thanks Ben,
> >>> > >
> >>> > >
> >>> > >
> >>> > > I tried that it still failed.
> >>> >
> >>> > As Vijay suggested have a look at /var/log/glusterfs, there should
> >>> be a log
> >>> > there with the mountpoint name that should give us a clue as to
> >>> what is
> >>> > going on. To note if there is a problem with FUSE not being
> >>> loaded you will
> >>> > see something like:
> >>> >
> >>> > [2013-01-12 01:58:22.213417] I [glusterfsd.c:1759:main]
> >>> > 0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version
> >>> > 3.3.0.5rhs
> >>> > [2013-01-12 01:58:22.213831] E [mount.c:596:gf_fuse_mount]
> >>> 0-glusterfs-fuse:
> >>> > cannot open /dev/fuse (No such file or directory)
> >>> > [2013-01-12 01:58:22.213856] E [xlator.c:385:xlator_init] 0-fuse:
> >>> > Initialization of volume 'fuse' failed, review your volfile again
> >>> >
> >>> > If you can't tell the problem from the log shoot out the relevant
> >>> line and
> >>> > I'll have a look.
> >>> >
> >>> > -b
> >>> >
> >>> >
> >>> > >
> >>> > >
> >>> > >
> >>> > > On Tuesday, January 14, 2014 3:22 PM, Ben Turner
> >>> <bturner at redhat.com <mailto:bturner at redhat.com>>
> >>> > > wrote:
> >>> > >
> >>> > > ----- Original Message -----
> >>> > > > From: "Jeffrey Brewster" <jab2805 at yahoo.com
> >>> <mailto:jab2805 at yahoo.com>>
> >>> > > > To: gluster-users at gluster.org <mailto:gluster-users at gluster.org>
> >>> > > > Sent: Tuesday, January 14, 2014 1:47:55 PM
> >>> > > > Subject: [Gluster-users] Unable to mount gfs gv0 volume
> >>> Enterprise Linux
> >>> > > > Enterprise Linux Server release 5.6
> >>> > > > (Carthage)
> >>> > > >
> >>> > > >
> >>> > > >
> >>> > > > Hi all,
> >>> > > >
> >>> > > > I have been following the quick start guide as part of a POC.
> >>> I created a
> >>> > > > 10GB brick to be mounted. I'm unable to mount the volume. I
> >>> don't see any
> >>> > > > thing in the logs. has anyone had the same issues? I was
> >>> thinking I need
> >>> > > > to
> >>> > > > install gluster-client but I don't see in the latest release rpms.
> >>> > > >
> >>> > > > Data:
> >>> > > > ===========
> >>> > > >
> >>> > > > OS Version:
> >>> > > > ------------
> >>> > > >
> >>> > > > Description: Enterprise Linux Enterprise Linux Server release 5.6
> >>> > > > (Carthage
> >>> > > >
> >>> > > >
> >>> > > > Installed packages on both servers
> >>> > > > ------------
> >>> > > >
> >>> > > > # rpm -qa | grep gluster | cat -n
> >>> > > > 1 glusterfs-libs-3.4.2-1.el5
> >>> > > > 2 glusterfs-3.4.2-1.el5
> >>> > > > 3 glusterfs-cli-3.4.2-1.el5
> >>> > > > 4 glusterfs-geo-replication-3.4.2-1.el5
> >>> > > > 5 glusterfs-fuse-3.4.2-1.el5
> >>> > > > 6 glusterfs-server-3.4.2-1.el5
> >>> > > >
> >>> > > >
> >>> > > > gluster peer probe successful:
> >>> > > > -----------
> >>> > > > peer probe: success: host gcvs0139 port 24007 already in peer list
> >>> > > >
> >>> > > > Gluster info:
> >>> > > > ---------
> >>> > > > gluster volume info | cat -n
> >>> > > > 1
> >>> > > > 2 Volume Name: gv0
> >>> > > > 3 Type: Replicate
> >>> > > > 4 Volume ID: 30a27041-ba1b-456f-b0bc-d8cdd2376c2f
> >>> > > > 5 Status: Started
> >>> > > > 6 Number of Bricks: 1 x 2 = 2
> >>> > > > 7 Transport-type: tcp
> >>> > > > 8 Bricks:
> >>> > > > 9 Brick1: gcvs0139:/data/gv0/brick1/app
> >>> > > > 10 Brick2: gcvs4056:/data/gv0/brick1/app
> >>> > > >
> >>> > > >
> >>> > > > Mount Failure:
> >>> > > > ----------
> >>> > > >
> >>> > > >
> >>> > > > [root at gcvs4056 <mailto:root at gcvs4056> jbrewster]# mount -t
> >>> glusterfs gcvs4056:/gv0 /mnt
> >>> > > > Mount failed. Please check the log file for more details.
> >>> > > >
> >>> > >
> >>> > > I bet you need to modprobe the fuse module, in el5 its not loaded by
> >>> > > default.
> >>> > >
> >>> > >
> >>> > > -b
> >>> > >
> >>> > > >
> >>> > > >
> >>> > > > _______________________________________________
> >>> > > > Gluster-users mailing list
> >>> > > > Gluster-users at gluster.org <mailto:Gluster-users at gluster.org>
> >>> > > > http://supercolony.gluster.org/mailman/listinfo/gluster-users
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> Gluster-users mailing list
> >>> Gluster-users at gluster.org <mailto:Gluster-users at gluster.org>
> >>> http://supercolony.gluster.org/mailman/listinfo/gluster-users
> >>
> >>
> >>
> >
> >
> >
>
>
More information about the Gluster-users
mailing list