[Gluster-users] [ovirt-users] Gluster command [<UNKNOWN>] failed on server...
Punit Dambiwal
hypunit at gmail.com
Mon Dec 1 03:35:30 UTC 2014
Hi,
Can Any body help me on this ??
On Thu, Nov 27, 2014 at 9:29 AM, Punit Dambiwal <hypunit at gmail.com> wrote:
> Hi Kaushal,
>
> Thanks for the detailed reply....let me explain my setup first :-
>
> 1. Ovirt Engine
> 2. 4* host as well as storage machine (Host and gluster combined)
> 3. Every host has 24 bricks...
>
> Now whenever the host machine reboot...it can come up but can not join the
> cluster again and through the following error "Gluster command [<UNKNOWN>]
> failed on server.."
>
> Please check my comment in line :-
>
> 1. Use the same string for doing the peer probe and for the brick address
> during volume create/add-brick. Ideally, we suggest you use properly
> resolvable FQDNs everywhere. If that is not possible, then use only IP
> addresses. Try to avoid short names.
> ---------------
> [root at cpu05 ~]# gluster peer status
> Number of Peers: 3
>
> Hostname: cpu03.stack.com
> Uuid: 5729b8c4-e80d-4353-b456-6f467bddbdfb
> State: Peer in Cluster (Connected)
>
> Hostname: cpu04.stack.com
> Uuid: d272b790-c4b2-4bed-ba68-793656e6d7b0
> State: Peer in Cluster (Connected)
> Other names:
> 10.10.0.8
>
> Hostname: cpu02.stack.com
> Uuid: 8d8a7041-950e-40d0-85f9-58d14340ca25
> State: Peer in Cluster (Connected)
> [root at cpu05 ~]#
> ----------------
> 2. During boot up, make sure to launch glusterd only after the network is
> up. This will allow the new peer identification mechanism to do its
> job correctly.
> >> I think the service itself doing the same job....
>
> [root at cpu05 ~]# cat /usr/lib/systemd/system/glusterd.service
> [Unit]
> Description=GlusterFS, a clustered file-system server
> After=network.target rpcbind.service
> Before=network-online.target
>
> [Service]
> Type=forking
> PIDFile=/var/run/glusterd.pid
> LimitNOFILE=65536
> ExecStart=/usr/sbin/glusterd -p /var/run/glusterd.pid
> KillMode=process
>
> [Install]
> WantedBy=multi-user.target
> [root at cpu05 ~]#
> --------------------
>
> gluster logs :-
>
> [2014-11-24 09:22:22.147471] I [MSGID: 100030] [glusterfsd.c:2018:main]
> 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.6.1
> (args: /usr/sbin/glusterd -p /var/run/glusterd.pid)
> [2014-11-24 09:22:22.151565] I [glusterd.c:1214:init] 0-management:
> Maximum allowed open file descriptors set to 65536
> [2014-11-24 09:22:22.151599] I [glusterd.c:1259:init] 0-management: Using
> /var/lib/glusterd as working directory
> [2014-11-24 09:22:22.155216] W [rdma.c:4195:__gf_rdma_ctx_create]
> 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such device)
> [2014-11-24 09:22:22.155264] E [rdma.c:4483:init] 0-rdma.management:
> Failed to initialize IB Device
> [2014-11-24 09:22:22.155285] E [rpc-transport.c:333:rpc_transport_load]
> 0-rpc-transport: 'rdma' initialization failed
> [2014-11-24 09:22:22.155354] W [rpcsvc.c:1524:rpcsvc_transport_create]
> 0-rpc-service: cannot create listener, initing the transport failed
> [2014-11-24 09:22:22.156290] I
> [glusterd.c:413:glusterd_check_gsync_present] 0-glusterd: geo-replication
> module not installed in the system
> [2014-11-24 09:22:22.161318] I
> [glusterd-store.c:2043:glusterd_restore_op_version] 0-glusterd: retrieved
> op-version: 30600
> [2014-11-24 09:22:22.821800] I
> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] 0-management:
> connect returned 0
> [2014-11-24 09:22:22.825810] I
> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] 0-management:
> connect returned 0
> [2014-11-24 09:22:22.828705] I
> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] 0-management:
> connect returned 0
> [2014-11-24 09:22:22.828771] I [rpc-clnt.c:969:rpc_clnt_connection_init]
> 0-management: setting frame-timeout to 600
> [2014-11-24 09:22:22.832670] I [rpc-clnt.c:969:rpc_clnt_connection_init]
> 0-management: setting frame-timeout to 600
> [2014-11-24 09:22:22.835919] I [rpc-clnt.c:969:rpc_clnt_connection_init]
> 0-management: setting frame-timeout to 600
> [2014-11-24 09:22:22.840209] E
> [glusterd-store.c:4248:glusterd_resolve_all_bricks] 0-glusterd: resolve
> brick failed in restore
> [2014-11-24 09:22:22.840233] E [xlator.c:425:xlator_init] 0-management:
> Initialization of volume 'management' failed, review your volfile again
> [2014-11-24 09:22:22.840245] E [graph.c:322:glusterfs_graph_init]
> 0-management: initializing translator failed
> [2014-11-24 09:22:22.840264] E [graph.c:525:glusterfs_graph_activate]
> 0-graph: init failed
> [2014-11-24 09:22:22.840754] W [glusterfsd.c:1194:cleanup_and_exit] (-->
> 0-: received signum (0), shutting down
>
> Thanks,
> Punit
>
>
>
>
> On Wed, Nov 26, 2014 at 7:14 PM, Kaushal M <kshlmster at gmail.com> wrote:
>
>> Based on the logs I can guess that glusterd is being started before
>> the network has come up and that the addresses given to bricks do not
>> directly match the addresses used in during peer probe.
>>
>> The gluster_after_reboot log has the line "[2014-11-25
>> 06:46:09.972113] E [glusterd-store.c:2632:glusterd_resolve_all_bricks]
>> 0-glusterd: resolve brick failed in restore".
>>
>> Brick resolution fails when glusterd cannot match the address for the
>> brick, with one of the peers. Brick resolution happens in two phases,
>> 1. We first try to identify the peer by performing string comparisions
>> with the brick address and the peer addresses (The peer names will be
>> the names/addresses that were given when the peer was probed).
>> 2. If we don't find a match from step 1, we will then resolve all the
>> brick address and the peer addresses into addrinfo structs, and then
>> compare these structs to find a match. This process should generally
>> find a match if available. This will fail only if the network is not
>> up yet as we cannot resolve addresses.
>>
>> The above steps are applicable only to glusterfs versions >=3.6. They
>> were introduced to reduce problems with peer identification, like the
>> one you encountered
>>
>> Since both of the steps failed to find a match in one run, but
>> succeeded later, we can come to the conclusion that,
>> a) the bricks don't have the exact same string used in peer probe for
>> their addresses as step 1 failed, and
>> b) the network was not up in the initial run, as step 2 failed during
>> the initial run, but passed in the second run.
>>
>> Please let me know if my conclusion is correct.
>>
>> If it is, you can solve your problem in two ways.
>> 1. Use the same string for doing the peer probe and for the brick
>> address during volume create/add-brick. Ideally, we suggest you use
>> properly resolvable FQDNs everywhere. If that is not possible, then
>> use only IP addresses. Try to avoid short names.
>> 2. During boot up, make sure to launch glusterd only after the network
>> is up. This will allow the new peer identification mechanism to do its
>> job correctly.
>>
>>
>> If you have already followed these steps and yet still hit the
>> problem, then please provide more information (setup, logs, etc.). It
>> could be much different problem that you are facing.
>>
>> ~kaushal
>>
>> On Wed, Nov 26, 2014 at 4:01 PM, Punit Dambiwal <hypunit at gmail.com>
>> wrote:
>> > Is there any one can help on this ??
>> >
>> > Thanks,
>> > punit
>> >
>> > On Wed, Nov 26, 2014 at 9:42 AM, Punit Dambiwal <hypunit at gmail.com>
>> wrote:
>> >>
>> >> Hi,
>> >>
>> >> My Glusterfs version is :- glusterfs-3.6.1-1.el7
>> >>
>> >> On Wed, Nov 26, 2014 at 1:59 AM, Kanagaraj Mayilsamy <
>> kmayilsa at redhat.com>
>> >> wrote:
>> >>>
>> >>> [+Gluster-users at gluster.org]
>> >>>
>> >>> "Initialization of volume 'management' failed, review your volfile
>> >>> again", glusterd throws this error when the service is started
>> automatically
>> >>> after the reboot. But the service is successfully started later
>> manually by
>> >>> the user.
>> >>>
>> >>> can somebody from gluster-users please help on this?
>> >>>
>> >>> glusterfs version: 3.5.1
>> >>>
>> >>> Thanks,
>> >>> Kanagaraj
>> >>>
>> >>> ----- Original Message -----
>> >>> > From: "Punit Dambiwal" <hypunit at gmail.com>
>> >>> > To: "Kanagaraj" <kmayilsa at redhat.com>
>> >>> > Cc: users at ovirt.org
>> >>> > Sent: Tuesday, November 25, 2014 7:24:45 PM
>> >>> > Subject: Re: [ovirt-users] Gluster command [<UNKNOWN>] failed on
>> >>> > server...
>> >>> >
>> >>> > Hi Kanagraj,
>> >>> >
>> >>> > Please check the attached log files....i didn't find any thing
>> >>> > special....
>> >>> >
>> >>> > On Tue, Nov 25, 2014 at 12:12 PM, Kanagaraj <kmayilsa at redhat.com>
>> >>> > wrote:
>> >>> >
>> >>> > > Do you see any errors in
>> >>> > > /var/log/glusterfs/etc-glusterfs-glusterd.vol.log or vdsm.log when
>> >>> > > the
>> >>> > > service is trying to start automatically after the reboot?
>> >>> > >
>> >>> > > Thanks,
>> >>> > > Kanagaraj
>> >>> > >
>> >>> > >
>> >>> > > On 11/24/2014 08:13 PM, Punit Dambiwal wrote:
>> >>> > >
>> >>> > > Hi Kanagaraj,
>> >>> > >
>> >>> > > Yes...once i will start the gluster service and then vdsmd ...the
>> >>> > > host
>> >>> > > can connect to cluster...but the question is why it's not started
>> >>> > > even it
>> >>> > > has chkconfig enabled...
>> >>> > >
>> >>> > > I have tested it in two host cluster environment...(Centos 6.6
>> and
>> >>> > > centos 7.0) on both hypervisior cluster..it's failed to reconnect
>> in
>> >>> > > to
>> >>> > > cluster after reboot....
>> >>> > >
>> >>> > > In both the environment glusterd enabled for next boot....but
>> it's
>> >>> > > failed with the same error....seems it's bug in either gluster or
>> >>> > > Ovirt ??
>> >>> > >
>> >>> > > Please help me to find the workaround here if can not resolve
>> >>> > > it...as
>> >>> > > without this the Host machine can not connect after reboot....that
>> >>> > > means
>> >>> > > engine will consider it as down and every time need to manually
>> start
>> >>> > > the
>> >>> > > gluster service and vdsmd... ??
>> >>> > >
>> >>> > > Thanks,
>> >>> > > Punit
>> >>> > >
>> >>> > > On Mon, Nov 24, 2014 at 10:20 PM, Kanagaraj <kmayilsa at redhat.com>
>> >>> > > wrote:
>> >>> > >
>> >>> > >> From vdsm.log "error: Connection failed. Please check if gluster
>> >>> > >> daemon
>> >>> > >> is operational."
>> >>> > >>
>> >>> > >> Starting glusterd service should fix this issue. 'service
>> glusterd
>> >>> > >> start'
>> >>> > >> But i am wondering why the glusterd was not started automatically
>> >>> > >> after
>> >>> > >> the reboot.
>> >>> > >>
>> >>> > >> Thanks,
>> >>> > >> Kanagaraj
>> >>> > >>
>> >>> > >>
>> >>> > >>
>> >>> > >> On 11/24/2014 07:18 PM, Punit Dambiwal wrote:
>> >>> > >>
>> >>> > >> Hi Kanagaraj,
>> >>> > >>
>> >>> > >> Please find the attached VDSM logs :-
>> >>> > >>
>> >>> > >> ----------------
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >>
>> >>> > >>
>> 21:41:17,182::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
>> >>> > >> Owner.cancelAll requests {}
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:17,182::task::993::Storage.TaskManager.Task::(_decref)
>> >>> > >> Task=`1691d409-9b27-4585-8281-5ec26154367a`::ref 0 aborting False
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:32,393::task::595::Storage.TaskManager.Task::(_updateState)
>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from state
>> init
>> >>> > >> ->
>> >>> > >> state preparing
>> >>> > >> Thread-13::INFO::2014-11-24
>> >>> > >> 21:41:32,393::logUtils::44::dispatcher::(wrapper) Run and
>> protect:
>> >>> > >> repoStats(options=None)
>> >>> > >> Thread-13::INFO::2014-11-24
>> >>> > >> 21:41:32,393::logUtils::47::dispatcher::(wrapper) Run and
>> protect:
>> >>> > >> repoStats, Return response: {}
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:32,393::task::1191::Storage.TaskManager.Task::(prepare)
>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::finished: {}
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:32,394::task::595::Storage.TaskManager.Task::(_updateState)
>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from state
>> >>> > >> preparing
>> >>> > >> ->
>> >>> > >> state finished
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >>
>> >>> > >>
>> 21:41:32,394::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll)
>> >>> > >> Owner.releaseAll requests {} resources {}
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >>
>> >>> > >>
>> 21:41:32,394::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
>> >>> > >> Owner.cancelAll requests {}
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:32,394::task::993::Storage.TaskManager.Task::(_decref)
>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::ref 0 aborting False
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:41,550::BindingXMLRPC::1132::vds::(wrapper) client
>> >>> > >> [10.10.10.2]::call
>> >>> > >> getCapabilities with () {}
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:41,553::utils::738::root::(execCmd)
>> >>> > >> /sbin/ip route show to 0.0.0.0/0 table all (cwd None)
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:41,560::utils::758::root::(execCmd)
>> >>> > >> SUCCESS: <err> = ''; <rc> = 0
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:41,588::caps::728::root::(_getKeyPackages) rpm package
>> >>> > >> ('gluster-swift',) not found
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:41,592::caps::728::root::(_getKeyPackages) rpm package
>> >>> > >> ('gluster-swift-object',) not found
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:41,593::caps::728::root::(_getKeyPackages) rpm package
>> >>> > >> ('gluster-swift-plugin',) not found
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package
>> >>> > >> ('gluster-swift-account',) not found
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package
>> >>> > >> ('gluster-swift-proxy',) not found
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package
>> >>> > >> ('gluster-swift-doc',) not found
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm package
>> >>> > >> ('gluster-swift-container',) not found
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm package
>> >>> > >> ('glusterfs-geo-replication',) not found
>> >>> > >> Thread-13::DEBUG::2014-11-24 21:41:41,600::caps::646::root::(get)
>> >>> > >> VirtioRNG DISABLED: libvirt version 0.10.2-29.el6_5.9 required >=
>> >>> > >> 0.10.2-31
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:41,603::BindingXMLRPC::1139::vds::(wrapper) return
>> >>> > >> getCapabilities
>> >>> > >> with {'status': {'message': 'Done', 'code': 0}, 'info':
>> >>> > >> {'HBAInventory':
>> >>> > >> {'iSCSI': [{'InitiatorName':
>> >>> > >> 'iqn.1994-05.com.redhat:32151ce183c8'}],
>> >>> > >> 'FC':
>> >>> > >> []}, 'packages2': {'kernel': {'release': '431.el6.x86_64',
>> >>> > >> 'buildtime':
>> >>> > >> 1385061309.0, 'version': '2.6.32'}, 'glusterfs-rdma': {'release':
>> >>> > >> '1.el6',
>> >>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'}, 'glusterfs-fuse':
>> >>> > >> {'release': '1.el6', 'buildtime': 1403622628L, 'version':
>> '3.5.1'},
>> >>> > >> 'spice-server': {'release': '6.el6_5.2', 'buildtime':
>> 1402324637L,
>> >>> > >> 'version': '0.12.4'}, 'vdsm': {'release': '1.gitdb83943.el6',
>> >>> > >> 'buildtime':
>> >>> > >> 1412784567L, 'version': '4.16.7'}, 'qemu-kvm': {'release':
>> >>> > >> '2.415.el6_5.10', 'buildtime': 1402435700L, 'version':
>> '0.12.1.2'},
>> >>> > >> 'qemu-img': {'release': '2.415.el6_5.10', 'buildtime':
>> 1402435700L,
>> >>> > >> 'version': '0.12.1.2'}, 'libvirt': {'release': '29.el6_5.9',
>> >>> > >> 'buildtime':
>> >>> > >> 1402404612L, 'version': '0.10.2'}, 'glusterfs': {'release':
>> '1.el6',
>> >>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'}, 'mom': {'release':
>> >>> > >> '2.el6',
>> >>> > >> 'buildtime': 1403794344L, 'version': '0.4.1'},
>> 'glusterfs-server':
>> >>> > >> {'release': '1.el6', 'buildtime': 1403622628L, 'version':
>> '3.5.1'}},
>> >>> > >> 'numaNodeDistance': {'1': [20, 10], '0': [10, 20]}, 'cpuModel':
>> >>> > >> 'Intel(R)
>> >>> > >> Xeon(R) CPU X5650 @ 2.67GHz', 'liveMerge': 'false',
>> >>> > >> 'hooks':
>> >>> > >> {},
>> >>> > >> 'cpuSockets': '2', 'vmTypes': ['kvm'], 'selinux': {'mode': '1'},
>> >>> > >> 'kdumpStatus': 0, 'supportedProtocols': ['2.2', '2.3'],
>> 'networks':
>> >>> > >> {'ovirtmgmt': {'iface': u'bond0.10', 'addr': '43.252.176.16',
>> >>> > >> 'bridged':
>> >>> > >> False, 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'mtu':
>> '1500',
>> >>> > >> 'bootproto4': 'none', 'netmask': '255.255.255.0', 'ipv4addrs': ['
>> >>> > >> 43.252.176.16/24' <http://43.252.176.16/24%27>], 'interface':
>> >>> > >> u'bond0.10', 'ipv6gateway': '::', 'gateway': '43.25.17.1'},
>> >>> > >> 'Internal':
>> >>> > >> {'iface': 'Internal', 'addr': '', 'cfg': {'DEFROUTE': 'no',
>> >>> > >> 'HOTPLUG':
>> >>> > >> 'no', 'MTU': '9000', 'DELAY': '0', 'NM_CONTROLLED': 'no',
>> >>> > >> 'BOOTPROTO':
>> >>> > >> 'none', 'STP': 'off', 'DEVICE': 'Internal', 'TYPE': 'Bridge',
>> >>> > >> 'ONBOOT':
>> >>> > >> 'no'}, 'bridged': True, 'ipv6addrs':
>> >>> > >> ['fe80::210:18ff:fecd:daac/64'],
>> >>> > >> 'gateway': '', 'bootproto4': 'none', 'netmask': '', 'stp': 'off',
>> >>> > >> 'ipv4addrs': [], 'mtu': '9000', 'ipv6gateway': '::', 'ports':
>> >>> > >> ['bond1.100']}, 'storage': {'iface': u'bond1', 'addr':
>> '10.10.10.6',
>> >>> > >> 'bridged': False, 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'],
>> >>> > >> 'mtu':
>> >>> > >> '9000', 'bootproto4': 'none', 'netmask': '255.255.255.0',
>> >>> > >> 'ipv4addrs': ['
>> >>> > >> 10.10.10.6/24' <http://10.10.10.6/24%27>], 'interface':
>> u'bond1',
>> >>> > >> 'ipv6gateway': '::', 'gateway': ''}, 'VMNetwork': {'iface':
>> >>> > >> 'VMNetwork',
>> >>> > >> 'addr': '', 'cfg': {'DEFROUTE': 'no', 'HOTPLUG': 'no', 'MTU':
>> >>> > >> '1500',
>> >>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'none', 'STP':
>> >>> > >> 'off',
>> >>> > >> 'DEVICE': 'VMNetwork', 'TYPE': 'Bridge', 'ONBOOT': 'no'},
>> 'bridged':
>> >>> > >> True,
>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'gateway': '',
>> >>> > >> 'bootproto4':
>> >>> > >> 'none', 'netmask': '', 'stp': 'off', 'ipv4addrs': [], 'mtu':
>> '1500',
>> >>> > >> 'ipv6gateway': '::', 'ports': ['bond0.36']}}, 'bridges':
>> >>> > >> {'Internal':
>> >>> > >> {'addr': '', 'cfg': {'DEFROUTE': 'no', 'HOTPLUG': 'no', 'MTU':
>> >>> > >> '9000',
>> >>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'none', 'STP':
>> >>> > >> 'off',
>> >>> > >> 'DEVICE': 'Internal', 'TYPE': 'Bridge', 'ONBOOT': 'no'},
>> >>> > >> 'ipv6addrs':
>> >>> > >> ['fe80::210:18ff:fecd:daac/64'], 'mtu': '9000', 'netmask': '',
>> >>> > >> 'stp':
>> >>> > >> 'off', 'ipv4addrs': [], 'ipv6gateway': '::', 'gateway': '',
>> 'opts':
>> >>> > >> {'topology_change_detected': '0', 'multicast_last_member_count':
>> >>> > >> '2',
>> >>> > >> 'hash_elasticity': '4', 'multicast_query_response_interval':
>> '999',
>> >>> > >> 'multicast_snooping': '1', 'multicast_startup_query_interval':
>> >>> > >> '3124',
>> >>> > >> 'hello_timer': '31', 'multicast_querier_interval': '25496',
>> >>> > >> 'max_age':
>> >>> > >> '1999', 'hash_max': '512', 'stp_state': '0', 'root_id':
>> >>> > >> '8000.001018cddaac', 'priority': '32768',
>> >>> > >> 'multicast_membership_interval':
>> >>> > >> '25996', 'root_path_cost': '0', 'root_port': '0',
>> >>> > >> 'multicast_querier':
>> >>> > >> '0',
>> >>> > >> 'multicast_startup_query_count': '2', 'hello_time': '199',
>> >>> > >> 'topology_change': '0', 'bridge_id': '8000.001018cddaac',
>> >>> > >> 'topology_change_timer': '0', 'ageing_time': '29995', 'gc_timer':
>> >>> > >> '31',
>> >>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0',
>> >>> > >> 'multicast_query_interval': '12498',
>> >>> > >> 'multicast_last_member_interval':
>> >>> > >> '99', 'multicast_router': '1', 'forward_delay': '0'}, 'ports':
>> >>> > >> ['bond1.100']}, 'VMNetwork': {'addr': '', 'cfg': {'DEFROUTE':
>> 'no',
>> >>> > >> 'HOTPLUG': 'no', 'MTU': '1500', 'DELAY': '0', 'NM_CONTROLLED':
>> 'no',
>> >>> > >> 'BOOTPROTO': 'none', 'STP': 'off', 'DEVICE': 'VMNetwork', 'TYPE':
>> >>> > >> 'Bridge',
>> >>> > >> 'ONBOOT': 'no'}, 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'],
>> >>> > >> 'mtu':
>> >>> > >> '1500', 'netmask': '', 'stp': 'off', 'ipv4addrs': [],
>> 'ipv6gateway':
>> >>> > >> '::',
>> >>> > >> 'gateway': '', 'opts': {'topology_change_detected': '0',
>> >>> > >> 'multicast_last_member_count': '2', 'hash_elasticity': '4',
>> >>> > >> 'multicast_query_response_interval': '999', 'multicast_snooping':
>> >>> > >> '1',
>> >>> > >> 'multicast_startup_query_interval': '3124', 'hello_timer': '131',
>> >>> > >> 'multicast_querier_interval': '25496', 'max_age': '1999',
>> >>> > >> 'hash_max':
>> >>> > >> '512', 'stp_state': '0', 'root_id': '8000.60eb6920b46c',
>> 'priority':
>> >>> > >> '32768', 'multicast_membership_interval': '25996',
>> 'root_path_cost':
>> >>> > >> '0',
>> >>> > >> 'root_port': '0', 'multicast_querier': '0',
>> >>> > >> 'multicast_startup_query_count': '2', 'hello_time': '199',
>> >>> > >> 'topology_change': '0', 'bridge_id': '8000.60eb6920b46c',
>> >>> > >> 'topology_change_timer': '0', 'ageing_time': '29995', 'gc_timer':
>> >>> > >> '31',
>> >>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0',
>> >>> > >> 'multicast_query_interval': '12498',
>> >>> > >> 'multicast_last_member_interval':
>> >>> > >> '99', 'multicast_router': '1', 'forward_delay': '0'}, 'ports':
>> >>> > >> ['bond0.36']}}, 'uuid': '44454C4C-4C00-1057-8053-B7C04F504E31',
>> >>> > >> 'lastClientIface': 'bond1', 'nics': {'eth3': {'permhwaddr':
>> >>> > >> '00:10:18:cd:da:ae', 'addr': '', 'cfg': {'SLAVE': 'yes',
>> >>> > >> 'NM_CONTROLLED':
>> >>> > >> 'no', 'MTU': '9000', 'HWADDR': '00:10:18:cd:da:ae', 'MASTER':
>> >>> > >> 'bond1',
>> >>> > >> 'DEVICE': 'eth3', 'ONBOOT': 'no'}, 'ipv6addrs': [], 'mtu':
>> '9000',
>> >>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr': '00:10:18:cd:da:ac',
>> >>> > >> 'speed':
>> >>> > >> 1000}, 'eth2': {'permhwaddr': '00:10:18:cd:da:ac', 'addr': '',
>> >>> > >> 'cfg':
>> >>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU': '9000', 'HWADDR':
>> >>> > >> '00:10:18:cd:da:ac', 'MASTER': 'bond1', 'DEVICE': 'eth2',
>> 'ONBOOT':
>> >>> > >> 'no'},
>> >>> > >> 'ipv6addrs': [], 'mtu': '9000', 'netmask': '', 'ipv4addrs': [],
>> >>> > >> 'hwaddr':
>> >>> > >> '00:10:18:cd:da:ac', 'speed': 1000}, 'eth1': {'permhwaddr':
>> >>> > >> '60:eb:69:20:b4:6d', 'addr': '', 'cfg': {'SLAVE': 'yes',
>> >>> > >> 'NM_CONTROLLED':
>> >>> > >> 'no', 'MTU': '1500', 'HWADDR': '60:eb:69:20:b4:6d', 'MASTER':
>> >>> > >> 'bond0',
>> >>> > >> 'DEVICE': 'eth1', 'ONBOOT': 'yes'}, 'ipv6addrs': [], 'mtu':
>> '1500',
>> >>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr': '60:eb:69:20:b4:6c',
>> >>> > >> 'speed':
>> >>> > >> 1000}, 'eth0': {'permhwaddr': '60:eb:69:20:b4:6c', 'addr': '',
>> >>> > >> 'cfg':
>> >>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU': '1500', 'HWADDR':
>> >>> > >> '60:eb:69:20:b4:6c', 'MASTER': 'bond0', 'DEVICE': 'eth0',
>> 'ONBOOT':
>> >>> > >> 'yes'},
>> >>> > >> 'ipv6addrs': [], 'mtu': '1500', 'netmask': '', 'ipv4addrs': [],
>> >>> > >> 'hwaddr':
>> >>> > >> '60:eb:69:20:b4:6c', 'speed': 1000}}, 'software_revision': '1',
>> >>> > >> 'clusterLevels': ['3.0', '3.1', '3.2', '3.3', '3.4', '3.5'],
>> >>> > >> 'cpuFlags':
>> >>> > >>
>> >>> > >>
>> u'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,popcnt,aes,lahf_lm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270',
>> >>> > >> 'ISCSIInitiatorName': 'iqn.1994-05.com.redhat:32151ce183c8',
>> >>> > >> 'netConfigDirty': 'False', 'supportedENGINEs': ['3.0', '3.1',
>> '3.2',
>> >>> > >> '3.3',
>> >>> > >> '3.4', '3.5'], 'autoNumaBalancing': 2, 'reservedMem': '321',
>> >>> > >> 'bondings':
>> >>> > >> {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '',
>> >>> > >> 'slaves':
>> >>> > >> [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': '', 'cfg':
>> >>> > >> {'HOTPLUG': 'no', 'MTU': '1500', 'NM_CONTROLLED': 'no',
>> >>> > >> 'BONDING_OPTS':
>> >>> > >> 'mode=4 miimon=100', 'DEVICE': 'bond0', 'ONBOOT': 'yes'},
>> >>> > >> 'ipv6addrs':
>> >>> > >> ['fe80::62eb:69ff:fe20:b46c/64'], 'mtu': '1500', 'netmask': '',
>> >>> > >> 'ipv4addrs': [], 'hwaddr': '60:eb:69:20:b4:6c', 'slaves':
>> ['eth0',
>> >>> > >> 'eth1'],
>> >>> > >> 'opts': {'miimon': '100', 'mode': '4'}}, 'bond1': {'addr':
>> >>> > >> '10.10.10.6',
>> >>> > >> 'cfg': {'DEFROUTE': 'no', 'IPADDR': '10.10.10.6', 'HOTPLUG':
>> 'no',
>> >>> > >> 'MTU':
>> >>> > >> '9000', 'NM_CONTROLLED': 'no', 'NETMASK': '255.255.255.0',
>> >>> > >> 'BOOTPROTO':
>> >>> > >> 'none', 'BONDING_OPTS': 'mode=4 miimon=100', 'DEVICE': 'bond1',
>> >>> > >> 'ONBOOT':
>> >>> > >> 'no'}, 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'], 'mtu':
>> '9000',
>> >>> > >> 'netmask': '255.255.255.0', 'ipv4addrs': ['10.10.10.6/24'
>> >>> > >> <http://10.10.10.6/24%27>], 'hwaddr': '00:10:18:cd:da:ac',
>> 'slaves':
>> >>> > >> ['eth2', 'eth3'], 'opts': {'miimon': '100', 'mode': '4'}},
>> 'bond2':
>> >>> > >> {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves':
>> [],
>> >>> > >> 'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '', 'cfg': {},
>> >>> > >> 'mtu':
>> >>> > >> '1500', 'netmask': '', 'slaves': [], 'hwaddr':
>> >>> > >> '00:00:00:00:00:00'}},
>> >>> > >> 'software_version': '4.16', 'memSize': '24019', 'cpuSpeed':
>> >>> > >> '2667.000',
>> >>> > >> 'numaNodes': {u'1': {'totalMemory': '12288', 'cpus': [6, 7, 8, 9,
>> >>> > >> 10, 11,
>> >>> > >> 18, 19, 20, 21, 22, 23]}, u'0': {'totalMemory': '12278', 'cpus':
>> [0,
>> >>> > >> 1, 2,
>> >>> > >> 3, 4, 5, 12, 13, 14, 15, 16, 17]}}, 'version_name': 'Snow Man',
>> >>> > >> 'vlans':
>> >>> > >> {'bond0.10': {'iface': 'bond0', 'addr': '43.25.17.16', 'cfg':
>> >>> > >> {'DEFROUTE':
>> >>> > >> 'yes', 'VLAN': 'yes', 'IPADDR': '43.25.17.16', 'HOTPLUG': 'no',
>> >>> > >> 'GATEWAY':
>> >>> > >> '43.25.17.1', 'NM_CONTROLLED': 'no', 'NETMASK': '255.255.255.0',
>> >>> > >> 'BOOTPROTO': 'none', 'DEVICE': 'bond0.10', 'MTU': '1500',
>> 'ONBOOT':
>> >>> > >> 'yes'},
>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'vlanid': 10,
>> 'mtu':
>> >>> > >> '1500',
>> >>> > >> 'netmask': '255.255.255.0', 'ipv4addrs': ['43.25.17.16/24']
>> >>> > >> <http://43.25.17.16/24%27%5D>}, 'bond0.36': {'iface': 'bond0',
>> >>> > >> 'addr':
>> >>> > >> '', 'cfg': {'BRIDGE': 'VMNetwork', 'VLAN': 'yes', 'HOTPLUG':
>> 'no',
>> >>> > >> 'MTU':
>> >>> > >> '1500', 'NM_CONTROLLED': 'no', 'DEVICE': 'bond0.36', 'ONBOOT':
>> >>> > >> 'no'},
>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'vlanid': 36,
>> 'mtu':
>> >>> > >> '1500',
>> >>> > >> 'netmask': '', 'ipv4addrs': []}, 'bond1.100': {'iface': 'bond1',
>> >>> > >> 'addr':
>> >>> > >> '', 'cfg': {'BRIDGE': 'Internal', 'VLAN': 'yes', 'HOTPLUG': 'no',
>> >>> > >> 'MTU':
>> >>> > >> '9000', 'NM_CONTROLLED': 'no', 'DEVICE': 'bond1.100', 'ONBOOT':
>> >>> > >> 'no'},
>> >>> > >> 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'], 'vlanid': 100,
>> 'mtu':
>> >>> > >> '9000',
>> >>> > >> 'netmask': '', 'ipv4addrs': []}}, 'cpuCores': '12', 'kvmEnabled':
>> >>> > >> 'true',
>> >>> > >> 'guestOverhead': '65', 'cpuThreads': '24', 'emulatedMachines':
>> >>> > >> [u'rhel6.5.0', u'pc', u'rhel6.4.0', u'rhel6.3.0', u'rhel6.2.0',
>> >>> > >> u'rhel6.1.0', u'rhel6.0.0', u'rhel5.5.0', u'rhel5.4.4',
>> >>> > >> u'rhel5.4.0'],
>> >>> > >> 'operatingSystem': {'release': '5.el6.centos.11.1', 'version':
>> '6',
>> >>> > >> 'name':
>> >>> > >> 'RHEL'}, 'lastClient': '10.10.10.2'}}
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:41,620::BindingXMLRPC::1132::vds::(wrapper) client
>> >>> > >> [10.10.10.2]::call
>> >>> > >> getHardwareInfo with () {}
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:41,621::BindingXMLRPC::1139::vds::(wrapper) return
>> >>> > >> getHardwareInfo
>> >>> > >> with {'status': {'message': 'Done', 'code': 0}, 'info':
>> >>> > >> {'systemProductName': 'CS24-TY', 'systemSerialNumber': '7LWSPN1',
>> >>> > >> 'systemFamily': 'Server', 'systemVersion': 'A00', 'systemUUID':
>> >>> > >> '44454c4c-4c00-1057-8053-b7c04f504e31', 'systemManufacturer':
>> >>> > >> 'Dell'}}
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:41,733::BindingXMLRPC::1132::vds::(wrapper) client
>> >>> > >> [10.10.10.2]::call
>> >>> > >> hostsList with () {} flowID [222e8036]
>> >>> > >> Thread-13::ERROR::2014-11-24
>> >>> > >> 21:41:44,753::BindingXMLRPC::1148::vds::(wrapper) vdsm exception
>> >>> > >> occured
>> >>> > >> Traceback (most recent call last):
>> >>> > >> File "/usr/share/vdsm/rpc/BindingXMLRPC.py", line 1135, in
>> wrapper
>> >>> > >> res = f(*args, **kwargs)
>> >>> > >> File "/usr/share/vdsm/gluster/api.py", line 54, in wrapper
>> >>> > >> rv = func(*args, **kwargs)
>> >>> > >> File "/usr/share/vdsm/gluster/api.py", line 251, in hostsList
>> >>> > >> return {'hosts': self.svdsmProxy.glusterPeerStatus()}
>> >>> > >> File "/usr/share/vdsm/supervdsm.py", line 50, in __call__
>> >>> > >> return callMethod()
>> >>> > >> File "/usr/share/vdsm/supervdsm.py", line 48, in <lambda>
>> >>> > >> **kwargs)
>> >>> > >> File "<string>", line 2, in glusterPeerStatus
>> >>> > >> File "/usr/lib64/python2.6/multiprocessing/managers.py", line
>> 740,
>> >>> > >> in
>> >>> > >> _callmethod
>> >>> > >> raise convert_to_error(kind, result)
>> >>> > >> GlusterCmdExecFailedException: Command execution failed
>> >>> > >> error: Connection failed. Please check if gluster daemon is
>> >>> > >> operational.
>> >>> > >> return code: 1
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:50,949::task::595::Storage.TaskManager.Task::(_updateState)
>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from state
>> init
>> >>> > >> ->
>> >>> > >> state preparing
>> >>> > >> Thread-13::INFO::2014-11-24
>> >>> > >> 21:41:50,950::logUtils::44::dispatcher::(wrapper) Run and
>> protect:
>> >>> > >> repoStats(options=None)
>> >>> > >> Thread-13::INFO::2014-11-24
>> >>> > >> 21:41:50,950::logUtils::47::dispatcher::(wrapper) Run and
>> protect:
>> >>> > >> repoStats, Return response: {}
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:50,950::task::1191::Storage.TaskManager.Task::(prepare)
>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::finished: {}
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:50,950::task::595::Storage.TaskManager.Task::(_updateState)
>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from state
>> >>> > >> preparing
>> >>> > >> ->
>> >>> > >> state finished
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >>
>> >>> > >>
>> 21:41:50,951::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll)
>> >>> > >> Owner.releaseAll requests {} resources {}
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >>
>> >>> > >>
>> 21:41:50,951::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
>> >>> > >> Owner.cancelAll requests {}
>> >>> > >> Thread-13::DEBUG::2014-11-24
>> >>> > >> 21:41:50,951::task::993::Storage.TaskManager.Task::(_decref)
>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::ref 0 aborting False
>> >>> > >> -------------------------------
>> >>> > >>
>> >>> > >> [root at compute4 ~]# service glusterd status
>> >>> > >> glusterd is stopped
>> >>> > >> [root at compute4 ~]# chkconfig --list | grep glusterd
>> >>> > >> glusterd 0:off 1:off 2:on 3:on 4:on 5:on
>> >>> > >> 6:off
>> >>> > >> [root at compute4 ~]#
>> >>> > >>
>> >>> > >> Thanks,
>> >>> > >> Punit
>> >>> > >>
>> >>> > >> On Mon, Nov 24, 2014 at 6:36 PM, Kanagaraj <kmayilsa at redhat.com>
>> >>> > >> wrote:
>> >>> > >>
>> >>> > >>> Can you send the corresponding error in vdsm.log from the host?
>> >>> > >>>
>> >>> > >>> Also check if glusterd service is running.
>> >>> > >>>
>> >>> > >>> Thanks,
>> >>> > >>> Kanagaraj
>> >>> > >>>
>> >>> > >>>
>> >>> > >>> On 11/24/2014 03:39 PM, Punit Dambiwal wrote:
>> >>> > >>>
>> >>> > >>> Hi,
>> >>> > >>>
>> >>> > >>> After reboot my Hypervisior host can not activate again in the
>> >>> > >>> cluster
>> >>> > >>> and failed with the following error :-
>> >>> > >>>
>> >>> > >>> Gluster command [<UNKNOWN>] failed on server...
>> >>> > >>>
>> >>> > >>> Engine logs :-
>> >>> > >>>
>> >>> > >>> 2014-11-24 18:05:28,397 INFO
>> >>> > >>>
>> >>> > >>>
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
>> >>> > >>> (DefaultQuartzScheduler_Worker-64) START,
>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId =
>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 5f251c90
>> >>> > >>> 2014-11-24 18:05:30,609 INFO
>> >>> > >>>
>> >>> > >>>
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
>> >>> > >>> (DefaultQuartzScheduler_Worker-64) FINISH,
>> >>> > >>> GlusterVolumesListVDSCommand,
>> >>> > >>> return:
>> >>> > >>>
>> >>> > >>>
>> {26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity at d95203e0
>> },
>> >>> > >>> log id: 5f251c90
>> >>> > >>> 2014-11-24 18:05:33,768 INFO
>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>> >>> > >>> (ajp--127.0.0.1-8702-8)
>> >>> > >>> [287d570d] Lock Acquired to object EngineLock [exclusiveLocks=
>> key:
>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a value: VDS
>> >>> > >>> , sharedLocks= ]
>> >>> > >>> 2014-11-24 18:05:33,795 INFO
>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Running command:
>> >>> > >>> ActivateVdsCommand internal: false. Entities affected : ID:
>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDSAction group
>> >>> > >>> MANIPULATE_HOST
>> >>> > >>> with role type ADMIN
>> >>> > >>> 2014-11-24 18:05:33,796 INFO
>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Before acquiring
>> >>> > >>> lock in
>> >>> > >>> order to prevent monitoring for host Compute5 from data-center
>> >>> > >>> SV_WTC
>> >>> > >>> 2014-11-24 18:05:33,797 INFO
>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Lock acquired,
>> from
>> >>> > >>> now a
>> >>> > >>> monitoring of host will be skipped for host Compute5 from
>> >>> > >>> data-center
>> >>> > >>> SV_WTC
>> >>> > >>> 2014-11-24 18:05:33,817 INFO
>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] START,
>> >>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId =
>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, status=Unassigned,
>> >>> > >>> nonOperationalReason=NONE, stopSpmFailureLogged=false), log id:
>> >>> > >>> 1cbc7311
>> >>> > >>> 2014-11-24 18:05:33,820 INFO
>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] FINISH,
>> >>> > >>> SetVdsStatusVDSCommand, log id: 1cbc7311
>> >>> > >>> 2014-11-24 18:05:34,086 INFO
>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Activate finished. Lock
>> >>> > >>> released.
>> >>> > >>> Monitoring can run now for host Compute5 from data-center SV_WTC
>> >>> > >>> 2014-11-24 18:05:34,088 INFO
>> >>> > >>>
>> >>> > >>>
>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Correlation ID: 287d570d,
>> Job
>> >>> > >>> ID:
>> >>> > >>> 5ef8e4d6-b2bc-469e-8e81-7ef74b2a001a, Call Stack: null, Custom
>> >>> > >>> Event ID:
>> >>> > >>> -1, Message: Host Compute5 was activated by admin.
>> >>> > >>> 2014-11-24 18:05:34,090 INFO
>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Lock freed to object
>> EngineLock
>> >>> > >>> [exclusiveLocks= key: 0bf6b00f-7947-4411-b55a-cc5eea2b381a
>> value:
>> >>> > >>> VDS
>> >>> > >>> , sharedLocks= ]
>> >>> > >>> 2014-11-24 18:05:35,792 INFO
>> >>> > >>>
>> >>> > >>>
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
>> >>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] START,
>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId =
>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 48a0c832
>> >>> > >>> 2014-11-24 18:05:37,064 INFO
>> >>> > >>>
>> >>> > >>>
>> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]
>> >>> > >>> (DefaultQuartzScheduler_Worker-69) START,
>> >>> > >>> GetHardwareInfoVDSCommand(HostName = Compute5, HostId =
>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a,
>> >>> > >>> vds=Host[Compute5,0bf6b00f-7947-4411-b55a-cc5eea2b381a]), log
>> id:
>> >>> > >>> 6d560cc2
>> >>> > >>> 2014-11-24 18:05:37,074 INFO
>> >>> > >>>
>> >>> > >>>
>> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]
>> >>> > >>> (DefaultQuartzScheduler_Worker-69) FINISH,
>> >>> > >>> GetHardwareInfoVDSCommand, log
>> >>> > >>> id: 6d560cc2
>> >>> > >>> 2014-11-24 18:05:37,093 WARN
>> >>> > >>> [org.ovirt.engine.core.vdsbroker.VdsManager]
>> >>> > >>> (DefaultQuartzScheduler_Worker-69) Host Compute5 is running with
>> >>> > >>> disabled
>> >>> > >>> SELinux.
>> >>> > >>> 2014-11-24 18:05:37,127 INFO
>> >>> > >>>
>> >>> > >>>
>> [org.ovirt.engine.core.bll.HandleVdsCpuFlagsOrClusterChangedCommand]
>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] Running command:
>> >>> > >>> HandleVdsCpuFlagsOrClusterChangedCommand internal: true.
>> Entities
>> >>> > >>> affected
>> >>> > >>> : ID: 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS
>> >>> > >>> 2014-11-24 18:05:37,147 INFO
>> >>> > >>>
>> >>> > >>>
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]
>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] START,
>> >>> > >>> GlusterServersListVDSCommand(HostName = Compute5, HostId =
>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a), log id: 4faed87
>> >>> > >>> 2014-11-24 18:05:37,164 INFO
>> >>> > >>>
>> >>> > >>>
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]
>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] FINISH,
>> >>> > >>> GlusterServersListVDSCommand, log id: 4faed87
>> >>> > >>> 2014-11-24 18:05:37,189 INFO
>> >>> > >>> [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Running command:
>> >>> > >>> SetNonOperationalVdsCommand internal: true. Entities affected :
>> >>> > >>> ID:
>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS
>> >>> > >>> 2014-11-24 18:05:37,206 INFO
>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] START,
>> >>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId =
>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, status=NonOperational,
>> >>> > >>> nonOperationalReason=GLUSTER_COMMAND_FAILED,
>> >>> > >>> stopSpmFailureLogged=false),
>> >>> > >>> log id: fed5617
>> >>> > >>> 2014-11-24 18:05:37,209 INFO
>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] FINISH,
>> >>> > >>> SetVdsStatusVDSCommand, log id: fed5617
>> >>> > >>> 2014-11-24 18:05:37,223 ERROR
>> >>> > >>>
>> >>> > >>>
>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Correlation ID:
>> >>> > >>> 4a84c4e5,
>> >>> > >>> Job
>> >>> > >>> ID: 4bfd4a6d-c3ef-468f-a40e-a3a6ca13011b, Call Stack: null,
>> Custom
>> >>> > >>> Event
>> >>> > >>> ID: -1, Message: Gluster command [<UNKNOWN>] failed on server
>> >>> > >>> Compute5.
>> >>> > >>> 2014-11-24 18:05:37,243 INFO
>> >>> > >>>
>> >>> > >>>
>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Correlation ID:
>> null,
>> >>> > >>> Call
>> >>> > >>> Stack: null, Custom Event ID: -1, Message: Status of host
>> Compute5
>> >>> > >>> was
>> >>> > >>> set
>> >>> > >>> to NonOperational.
>> >>> > >>> 2014-11-24 18:05:37,272 INFO
>> >>> > >>> [org.ovirt.engine.core.bll.HandleVdsVersionCommand]
>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Running command:
>> >>> > >>> HandleVdsVersionCommand internal: true. Entities affected : ID:
>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS
>> >>> > >>> 2014-11-24 18:05:37,274 INFO
>> >>> > >>> [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Host
>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a : Compute5 is already in
>> >>> > >>> NonOperational status for reason GLUSTER_COMMAND_FAILED.
>> >>> > >>> SetNonOperationalVds command is skipped.
>> >>> > >>> 2014-11-24 18:05:38,065 INFO
>> >>> > >>>
>> >>> > >>>
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
>> >>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] FINISH,
>> >>> > >>> GlusterVolumesListVDSCommand, return:
>> >>> > >>>
>> >>> > >>>
>> {26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity at 4e72a1b1
>> },
>> >>> > >>> log id: 48a0c832
>> >>> > >>> 2014-11-24 18:05:43,243 INFO
>> >>> > >>>
>> >>> > >>>
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
>> >>> > >>> (DefaultQuartzScheduler_Worker-35) START,
>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId =
>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 3ce13ebc
>> >>> > >>> ^C
>> >>> > >>> [root at ccr01 ~]#
>> >>> > >>>
>> >>> > >>> Thanks,
>> >>> > >>> Punit
>> >>> > >>>
>> >>> > >>>
>> >>> > >>> _______________________________________________
>> >>> > >>> Users mailing
>> >>> > >>> listUsers at ovirt.orghttp://
>> lists.ovirt.org/mailman/listinfo/users
>> >>> > >>>
>> >>> > >>>
>> >>> > >>>
>> >>> > >>
>> >>> > >>
>> >>> > >
>> >>> > >
>> >>> >
>> >>
>> >>
>> >
>> >
>> > _______________________________________________
>> > Gluster-users mailing list
>> > Gluster-users at gluster.org
>> > http://supercolony.gluster.org/mailman/listinfo/gluster-users
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20141201/db4f1945/attachment.html>
More information about the Gluster-users
mailing list