[Gluster-users] NIC bonding with glusterfs

[Heggland, Christian]

Have a look here:

http://wiki.centos.org/TipsAndTricks/BondingInterfaces
or
http://www.tokiwinter.com/configuring-interface-bonding-on-centosrheloel-6-x/

Should put you on the right track :)

Christian Heggland
Systems Administrator
National Oilwell Varco
Korsvikfjorden Industriomrade
N-4639 KRISTIANSAND S
Phone: +4738192000
Direct:  +4738048514
Cell: +4748235475
www.nov.com<http://www.nov.com>

This message, including any attachments, is intended only for the addressee and may contain privileged or confidential information. Any unauthorized disclosure is strictly prohibited. If you receive this message in error, please notify us immediately so that we may correct our internal records. Please then delete the original message. Thank you.
From: Jake G. [mailto:dj_dark_junglist at yahoo.com]
Sent: 19. september 2013 11:21
To: Heggland, Christian; gluster-users at gluster.org
Subject: Re: [Gluster-users] NIC bonding with glusterfs

Sorry I am using CentOS 6.4

________________________________
From: "Heggland, Christian" <Christian.Heggland at nov.com<mailto:Christian.Heggland at nov.com>>
To: Jake G. <dj_dark_junglist at yahoo.com<mailto:dj_dark_junglist at yahoo.com>>; "gluster-users at gluster.org<mailto:gluster-users at gluster.org>" <gluster-users at gluster.org<mailto:gluster-users at gluster.org>>
Sent: Thursday, September 19, 2013 6:08 PM
Subject: RE: [Gluster-users] NIC bonding with glusterfs

Hello

What distro are you running ?


Regards,
Christian
From: gluster-users-bounces at gluster.org<mailto:gluster-users-bounces at gluster.org> [mailto:gluster-users-bounces at gluster.org] On Behalf Of Jake G.
Sent: 19. september 2013 10:05
To: gluster-users at gluster.org<mailto:gluster-users at gluster.org>
Subject: [Gluster-users] NIC bonding with glusterfs

Hi all,

In the process of setting up a two node gluster volume and would like to setup NIC bonding to improve network performance.

What is the preferred method to use NIC bonding for glusterfs?

I used in my /etc/modprobe.d/bonding.conf file

alias bond0 bonding
options bond0 mode=6 miimon=100

Do I need any other options in there? would anyone have a gluster specific NIC bonding guide to refer to?

Thank you in advance.

Jake

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20130919/bbf61f43/attachment.html>