[Gluster-users] Need advice for choosing proper glusterfs cluster hardware

[Bryan Whitehead]

No matter what you do, you will be limited by your network speed. Consider
getting 10Gig network cards or Infiniband.

All writes will need to hit both servers, so the max throughput you'll get
is about 50MB/sec with a 1G card. You can get a full 100MB/sec by using the
NFS/gluster connector to one of the servers (assuming your servers have
10G/Infiniband).

On Mon, Mar 12, 2012 at 7:26 AM, Xavier Normand <xavier.normand at gmail.com>wrote:

> Hi,
>
> I'm in a process to our NFS / DRDB setup to a more scalable glusterfs
> cluster. I would like to some advise on what would be the best hardware
> match to fit both speed and storage. Currently our actual setup fit's out
> need for speed, but adding storage in that kind of setup a pain!
>
> Current setup:
> 2 servers [ Active / Passive ]
> Quad Core 2.4
> Raid 10 [ 8 * 600GB SAS 3 GB/s  ]
> 2.2 TB usable space
> client protocol: NFS
>
> What i plan to use:
> 2 servers [ Distributed replicate ]
> i5 - Quad Core - 3,3Ghz
> Raid 10 [ 4 * 2TB SATA ]
> 3.72 TB usable space
> Client protocol: glusterfs
>
> The big question! Should i use more servers with less disk space to get
> the same speed. Or i will probably get the same speed as my actual NFS
> setup. We host a lot of small files that will be read by our fontend
> servers.
>
> Thank's
>
> *Xavier Normand*
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20120313/6c7b43f8/attachment.html>