[Gluster-users] Connected but not connected?
Mohit Anchlia
mohitanchlia at gmail.com
Thu May 19 17:08:34 UTC 2011
Generally probing more than once should give something like "peer
already in the list" message.
On Thu, May 19, 2011 at 7:12 AM, Whit Blauvelt
<whit.gluster at transpect.com> wrote:
> Hi Pranith,
>
> I got past the problem by stopping glusterd on both systems, deleting the
> files from /etc/glusterd/peers, restarting glusterd, then doing the peer
> probe again. Everything went normally that time. So it must have been
> something about the values in the files in /etc/glusterd/peers that was in
> error.
>
> Now I see that "State: Accepted peer request (Connected)" was not really the
> response to want from "gluster peer status." With the working setup, the
> response is "State: Peer in Cluster (Connected)," which makes more sense.
>
> The not-working state before had followed it taking several peer probes to
> get that step to succeed, so I'd guess the flawed files in
> /etc/glusterd/peers were related to probing more than once. After deleting
> those files, probing worked the first time.
>
> Whit
>
> On Thu, May 19, 2011 at 04:40:35AM -0500, Pranith Kumar. Karampuri wrote:
>> Hi Whit,
>> Could you please zip the logs and send them across. They are generally located in /usr/local/var/log/glusterfs/
>> I also need the following outputs:
>> On white:
>> gluster fsm log black
>> On black:
>> gluster fsm log white
>>
>> We need to fix the error message saying that the "peer is not in cluster".
>>
>> Pranith
>> ----- Original Message -----
>> From: "Whit Blauvelt" <whit.gluster at transpect.com>
>> To: gluster-users at gluster.org
>> Sent: Thursday, May 19, 2011 6:49:53 AM
>> Subject: [Gluster-users] Connected but not connected?
>>
>> Hi,
>>
>> This is an attempt to recreate a small replicated storage that was
>> previously working between these two systems using 3.2.0, which has been
>> removed from the systems (for prudential reasons) and 3.1.3 installed.
>> Everything from 3.2.0 was removed _except_ that the two blocks I'm trying to
>> bind still have their replicated data from 3.2.0.
>>
>> With two hosts, "white" and "black":
>>
>> root at white# gluster peer status
>> Number of Peers: 1
>>
>> Hostname: black
>> Uuid: 6f7238a2-df00-464e-a296-4bb38ddc8b1c
>> State: Accepted peer request (Connected)
>> root at white# gluster volume create bind replica 2 transport tcp white:/mnt/gluster/bind black:/mnt/gluster/bind
>> Host black not connected
>>
>> Okay, black is "Connected" but "not connected." Let's try from black:
> ...
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>
More information about the Gluster-users
mailing list