[Gluster-users] Gluster 3.2.0 and ucarp not working

[bxmatus at gmail.com]

Hi Craig,

thanks for answer. I'm using replications - which is working ok,
volume is mounted using -t glusterfs parameter, does it matter ?
All nodes are using real IP's not virtual ( for probing etc ) , i'm
using virtual only for mounting volume on client. I was waiting over
10 minutes for volume
to "wake up" but it never start to work - it never switch to another
node, even when UCARP was already pointing there, there was lot
of "recovery" messages on log but no attemt to connect to second node.

thanks

Matus


2011/6/6 Craig Carl <ccarl at gluster.com>:
> Matus -
>
> Gluster has automatic, built-in failover if you are using replica nodes.
> ucarp is only required if you want highly available NFS mounts.
>
>   To use ucarp with Gluster you should -
>        1. Install Gluster and create a replica volume. [1]
>            1. DO NOT use the virtual IPs when you peer probe or create
> the volume, that won't work.
>            2. Set the ping-timeout volume option to 25 seconds. [2]
>        2. Install and setup ucarp.
>        3. Mount your NFS clients using the VIPs.
>        4. Mount your glusterfs clients using the real IP addresses.
>
> We mostly use CTDB because it supports NFS and Samba, I can't attach a
> document here but I'll email you directly with the documentation.
>
> [1]
> http://gluster.com/community/documentation/index.php/Gluster_3.2:_Configuring_Distributed_Replicated_Volumes
> [2]
> http://gluster.com/community/documentation/index.php/Gluster_3.2:_Setting_Volume_Options
>
> Thanks,
>
> Craig
>
> --
> Craig Carl, Senior Systems Engineer | Gluster
> 408.829.9953(PST) | http://gluster.com
> http://www.gluster.com/gluster-for-aws/
> http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xE5666F925A557DD8
>
>
> On 6/6/11 12:09 AM, bxmatus at gmail.com wrote:
>> Hello everybody.
>>
>> I have a problem setting up gluster failover funcionality. Based on
>> manual i setup ucarp which is working well ( tested with ping/ssh etc
>> )
>>
>> But when i use virtual address for gluster volume mount and i turn off
>> one of nodes machine/gluster will freeze until node is back online.
>>
>> My virtual ip is 3.200 and machine real ip is 3.233 and 3.5. In
>> gluster log i can see:
>>
>> [2011-06-06 02:33:54.230082] I
>> [client-handshake.c:913:client_setvolume_cbk] 0-atlas-client-1:
>> Connected to 192.168.3.233:24009, attached to re
>> mote volume '/atlas'.
>> [2011-06-06 02:33:54.230116] I [afr-common.c:2514:afr_notify]
>> 0-atlas-replicate-0: Subvolume 'atlas-client-1' came back up; going
>> online.
>> [2011-06-06 02:33:54.237541] I [fuse-bridge.c:3316:fuse_graph_setup]
>> 0-fuse: switched to graph 0
>> [2011-06-06 02:33:54.237801] I [fuse-bridge.c:2897:fuse_init]
>> 0-glusterfs-fuse: FUSE inited with protocol versions: glusterfs 7.13
>> kernel 7.13
>> [2011-06-06 02:33:54.238757] I [afr-common.c:836:afr_fresh_lookup_cbk]
>> 0-atlas-replicate-0: added root inode
>> [2011-06-06 02:33:54.272650] I
>> [client-handshake.c:913:client_setvolume_cbk] 0-atlas-client-0:
>> Connected to 192.168.3.5:24009, attached to remo
>> te volume '/atlas'.
>>
>>
>> Even when IP i'm using at mount is 3.200 ... Its look like that at the
>> end gluster is using real machine IP's even when i'm connecting to
>> virtual. Is there a way
>> how to turn this functionality off or it is just broken ?
>>
>> thanks for answer
>>
>> Matus
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.org
>> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>