[Gluster-users] error: "Transport endpoint is not connected" and "Stale NFS file handle"

[José Manuel Canelas]

Argh, the pain!

I can't believe I didn't see that. I'm sorry for wasting your time. (and
for the delayed reply, have been away)

I'll test this configuration in the next phase and report back.

thank you,
zé

On 03/22/2010 04:03 AM, Raghavendra G wrote:
> Hi Jose,
> 
> There is a mistake in volume specification file. Please see the inlined comments below.
> 
> On Fri, Feb 26, 2010 at 7:55 PM, José Manuel Canelas <jcanelas at co.sapo.pt<mailto:jcanelas at co.sapo.pt>> wrote:
> Hello, everyone.
> 
> We're setting up GlusterFS for some testing and having some trouble with
> the configuration.
> 
> We have 4 nodes as clients and servers, 4 disks each. I'm trying to
> setup 3 replicas across all those 16 disks, configured at the client
> side, for high availability and optimal performance, in a way that makes
> it easy to add new disks and nodes.
> 
> The best way I thought doing it was to put disks together from different
> nodes into 3 distributed volumes and then use each of those as a replica
> of the top volume. I'd like your input on this too, so if you look at
> the configuration and something looks wrong or dumb, it probably is, so
> please let me know :)
> 
> Now the server config looks like this:
> 
> volume posix1
>  type storage/posix
>  option directory /srv/gdisk01
> end-volume
> 
> volume locks1
>    type features/locks
>    subvolumes posix1
> end-volume
> 
> volume brick1
>    type performance/io-threads
>    option thread-count 8
>    subvolumes locks1
> end-volume
> 
> [4 more identical bricks and...]
> 
> volume server-tcp
>    type protocol/server
>    option transport-type tcp
>    option auth.addr.brick1.allow *
>    option auth.addr.brick2.allow *
>    option auth.addr.brick3.allow *
>    option auth.addr.brick4.allow *
>    option transport.socket.listen-port 6996
>    option transport.socket.nodelay on
>    subvolumes brick1 brick2 brick3 brick4
> end-volume
> 
> 
> The client config:
> 
> volume node01-1
>    type protocol/client
>    option transport-type tcp
>    option remote-host node01
>    option transport.socket.nodelay on
>    option transport.remote-port 6996
>    option remote-subvolume brick1
> end-volume
> 
> [repeated for every brick, until node04-4]
> 
> ### Our 3 replicas
> volume repstore1
>    type cluster/distribute
>    subvolumes node01-1 node02-1 node03-1 node04-1 node04-4
> end-volume
> 
> volume repstore2
>    type cluster/distribute
>    subvolumes node01-2 node02-2 node03-2 node04-2 node02-2
> 
> node02-2 is specfied twice. Any subvolume should be specified only once here.
> 
> end-volume
> 
> volume repstore3
>    type cluster/distribute
>    subvolumes node01-3 node02-3 node03-3 node04-3 node03-3
> 
> same here. node03-3 is specfied twice.
> 
> end-volume
> 
> volume replicate
>    type cluster/replicate
>    subvolumes repstore1 repstore2 repstore3
> end-volume
> 
> [and then the performance bits]
> 
> 
> When starting the glusterfs server, everything looks fine. I then mount
> the filesystem with
> 
> node01:~# glusterfs --debug -f /etc/glusterfs/glusterfs.vol
> /srv/gluster-export
> 
> and it does not complain and shows up as properly mounted. When
> accessing the content, it gives back an error, that the "Transport
> endpoint is not connected". The log has a "Stale NFS file handle"
> warning. See bellow:
> 
> [...]
> [2010-02-26 14:56:01] D [dht-common.c:274:dht_revalidate_cbk] repstore3:
> mismatching layouts for /
> [2010-02-26 14:56:01] W [fuse-bridge.c:722:fuse_attr_cbk]
> glusterfs-fuse: 9: LOOKUP() / => -1 (Stale NFS file handle)
> 
> 
> node01:~# mount
> /dev/cciss/c0d0p1 on / type ext3 (rw,errors=remount-ro)
> tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
> proc on /proc type proc (rw,noexec,nosuid,nodev)
> sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
> procbususb on /proc/bus/usb type usbfs (rw)
> udev on /dev type tmpfs (rw,mode=0755)
> tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
> devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
> fusectl on /sys/fs/fuse/connections type fusectl (rw)
> /dev/cciss/c0d1 on /srv/gdisk01 type ext3 (rw,errors=remount-ro)
> /dev/cciss/c0d2 on /srv/gdisk02 type ext3 (rw,errors=remount-ro)
> /dev/cciss/c0d3 on /srv/gdisk03 type ext3 (rw,errors=remount-ro)
> /dev/cciss/c0d4 on /srv/gdisk04 type ext3 (rw,errors=remount-ro)
> /etc/glusterfs/glusterfs.vol on /srv/gluster-export type fuse.glusterfs
> (rw,allow_other,default_permissions,max_read=131072)
> node01:~# ls /srv/gluster-export
> ls: cannot access /srv/gluster-export: Transport endpoint is not connected
> node01:~#
> 
> 
> The complete debug log and configuration files are attached.
> 
> Thank you in advance,
> José Canelas
> 
> 
> 
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org<mailto:Gluster-users at gluster.org>
> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
> 
> 
> Let us know whether this fixes your problem :).
> 
> --
> Raghavendra G
> 
>