[Gluster-users] mount failed

[Jass Zhao]

Hi,

I tried gluster .3.0 with centos5.2 x86_64. I following the installation
guide: *
http://www.gluster.com/community/documentation/index.php/GlusterFS_User_Guide
*
*
*
*After configuring a distribute volume, the mount failed:**
*
*/usr/bin/glusterfs-volgen --name testvol comp-1:/data/testvol
comp-2:/data/testvol
*
*mount -t glusterfs /etc/glusterfs/testvol-tcp.vol /data//mnt/
*
*
*
*Here is the log: /var/log/glusterfs/data-mnt-.log
*
*
*
*
================================================================================
Version : glusterfs 3.0.0 built on Dec 8 2009 03:09:12
git: 2.0.1-886-g8379edd
Starting Time: 2010-02-03 15:51:31
Command line : /usr/sbin/glusterfs --log-level=NORMAL
--volfile-server-port=6996 --volfile-server=compute-5-2 /data2/zhaopeng/mnt/
PID : 32578
System name : Linux
Nodename : compute-5-2.local
Kernel Release : 2.6.18-92.el5xen
Hardware Identifier: x86_64

Given volfile:
+------------------------------------------------------------------------------+
1: ### file: server-volume.vol.sample
2:
3: #####################################
4: ### GlusterFS Server Volume File ##
5: #####################################
6:
7: #### CONFIG FILE RULES:
8: ### "#" is comment character.
9: ### - Config file is case sensitive
10: ### - Options within a volume block can be in any order.
11: ### - Spaces or tabs are used as delimitter within a line.
12: ### - Multiple values to options will be : delimitted.
13: ### - Each option should end within a line.
14: ### - Missing or commented fields will assume default values.
15: ### - Blank/commented lines are allowed.
16: ### - Sub-volumes should already be defined above before referring.
17:
18: ### Export volume "brick" with the contents of "/home/export" directory.
19: volume brick
20: type storage/posix # POSIX FS translator
21: option directory /home/export # Export this directory
22: end-volume
23:
24: ### Add network serving capability to above brick.
25: volume server
26: type protocol/server
27: option transport-type tcp
28: # option transport-type unix

29: # option transport-type ib-sdp
30: # option transport.socket.bind-address 192.168.1.10 # Default is to
listen on all interfaces
31: # option transport.socket.listen-port 6996 # Default is 6996
32:
33: # option transport-type ib-verbs
34: # option transport.ib-verbs.bind-address 192.168.1.10 # Default is to
listen on all interfaces
35: # option transport.ib-verbs.listen-port 6996 # Default is 6996
36: # option transport.ib-verbs.work-request-send-size 131072
37: # option transport.ib-verbs.work-request-send-count 64
38: # option transport.ib-verbs.work-request-recv-size 131072
39: # option transport.ib-verbs.work-request-recv-count 64
40:
41: # option client-volume-filename /etc/glusterfs/glusterfs-client.vol
42: subvolumes brick
43: # NOTE: Access to any volume through protocol/server is denied by
44: # default. You need to explicitly grant access through # "auth"
45: # option.
46: option auth.addr.brick.allow * # Allow access to "brick" volume
47: end-volume

+------------------------------------------------------------------------------+
[2010-02-03 15:51:31] E [mount.c:510:fuse_mount_sys] glusterfs-fuse: cannot
open /dev/fuse (No such device)
[2010-02-03 15:51:31] N [mount.c:587:gf_fuse_mount] glusterfs-fuse: direct
mount failed (No such device), retry to mount via fusermount
[2010-02-03 15:51:31] E [mount.c:611:gf_fuse_mount] glusterfs-fuse: mount
failed
[2010-02-03 15:51:31] E [xlator.c:838:xlator_init_rec] fuse: Initialization
of volume 'fuse' failed, review your volfile again
[2010-02-03 15:51:31] E [glusterfsd.c:583:_xlator_graph_init] glusterfs:
initializing translator failed

*
*Has anyone ran into the same problem?
*
*
*
*BR,
*
*Gnep
*
*
*