[Gluster-users] Fwd: NUFA sample volume file to the following configuration

[Stas Oskin]

Hi.

Can you advice regarding the below?

Regards.

2008/12/28 Stas Oskin <stas.oskin at gmail.com>

> Hi.
>
> Thanks for the link, but I already seen it.
>
> What I need to know, is how to include in volume the separate disk drives
> that I have on the server.
> Also, how to set an AFR there.
>
> Regards.
>
>
> 2008/12/28 Basavanagowda Kanur <gowda at zresearch.com>
>
> Stas,
>> http://gluster.org/docs/index.php/NUFA_with_single_process will help you
>> setup NUFA.
>>
>> --
>> gowda
>>
>> On Sun, Dec 28, 2008 at 4:44 AM, Stas Oskin <stas.oskin at gmail.com> wrote:
>>
>>> Hi.
>>>
>>> I'm looking to run GlusterFS in NUFA approach for 2 servers in following
>>> configuration:
>>>
>>> /dev/md2              4.8G  1.1G  3.5G  25% /
>>> /dev/sda5             357G  195M  339G   1% /disk1
>>> /dev/sdb5             357G  195M  339G   1% /disk2
>>> /dev/sdc3             357G  195M  339G   1% /disk3
>>> /dev/sdd3             357G  195M  339G   1% /disk4
>>> /dev/md0              190M   12M  169M   7% /boot
>>>
>>> Where the data would be located on sda/b/c/d disks.
>>>
>>> I studied the volume file syntax, but couldn't understand how to create a
>>> file to unify all these disks into one volume.
>>>
>>> If someone could post a sample file, which does a NUFA setup for 2
>>> servers with such disks topology + AFR between them, so I could get started
>>> with it, I'd much appreciate it.
>>>
>>> Thanks in advance.
>>>
>>> _______________________________________________
>>> Gluster-users mailing list
>>> Gluster-users at gluster.org
>>> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
>>>
>>>
>>
>>
>> --
>> hard work often pays off after time, but laziness always pays off now
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20081229/2e515ff5/attachment.html>