[Gluster-users] VMDK file replication issue

Fri Aug 8 03:46:36 UTC 2008

Hi Marco,
There is nothing suspicious in Configuration. Can you attach the complete
logfiles of both glusterfs process?

regards,

On Thu, Aug 7, 2008 at 9:19 PM, Marco Trevisan
<marco.trevisan at cardinis.com>wrote:

> Hi all,
>
> I'm in the process of evaluating GlusterFS as a clustered file system, I
> like it very much because -among the other cool features- it's very easy
> to configure and it allows me to reuse the filesystems I already know as
> storage backends.
>
> Before trying it on expensive hardware, I decided to try it on a very
> low HW configuration:
>
> - 2 old PCs  (one P4 class CPU, IDE drives, one 100 Mbps ethernet card)
> and a 100 Mbps switch.
>
> The OS is Debian 'lenny' in both nodes. 'Lenny' comes with FUSE v2.7.2.
>
> I then compiled glusterfs 1.3.10 on both nodes and setup a server-side,
> single-process AFR configuration (the file content is reported below).
> I did NOT use the glusterfs-patched FUSE library.
>
> On top of that I've put some VMWare Server virtual machines. Each
> virtual machine image is split into a few 2 GB "vmdk" files (not
> preallocated).
>
> I was successful in starting up and running my virtual machines (with
> only an additional line in their configuration files), so I was very
> happy with it.
>
> The problem now is, after putting a virtual machine under "intense"
> I/O,  when I rebooted it today I found its root filesystem (=the vmdk)
> was corrupted. It lost some important directories (e.g. kernel modules
> directory under /lib/modules).
>
> Just to give you a little more detail of the behaviour under I/O, when
> the virtual machine is doing I/O to the VMDK file, iptraf shows the
> corresponding traffic on the ethernet link at about 15-50 Mbps, so it
> looks like only the modified portions of the file are being sent to the
> other AFR node, infact if I simulate a failure by powering off the other
> AFR node, at reboot I see 90 Mbps (link saturation) traffic as I try to
> open the VMDK file, and that operation blocks until full synchronization
> has finished.
>
> The glusterfs.log content is as follows:
> [...]
> 2008-08-06 12:20:24 E [posix-locks.c:1148:pl_lk] gfs-ds-locks: returning
> EAGAIN
> 2008-08-06 12:20:24 E [afr.c:3190:afr_lk_cbk] gfs-ds-afr:
> (path=/logs-127.0.1.1/.terracotta-logging.lock child=gfs-ds-locks)
> op_ret=-1 op_errno=11
> 2008-08-06 12:42:25 E [posix-locks.c:1148:pl_lk] gfs-ds-locks: returning
> EAGAIN
> 2008-08-06 12:42:25 E [afr.c:3190:afr_lk_cbk] gfs-ds-afr:
> (path=/logs-127.0.1.1/.terracotta-logging.lock child=gfs-ds-locks)
> op_ret=-1 op_errno=11
> 2008-08-07 11:42:17 E [posix-locks.c:1180:pl_forget] gfs-ds-locks:
> Active locks found!
>
>
> The above log does not seem to justify such file corruption... there is
> nothing related to "vmdk" files.
>
> Any suggestions?
> Is the HW configuration way too slow for afr to work reliably?
> Are there mistakes in the configuration file?
>
> Any help is really appreciated.
>
> Kind regards,
>   Marco
>
>
> ----------GlusterFS config file ----------------
>
> # dataspace on storage1
> volume gfs-ds
>  type storage/posix
>  option directory /mnt/hda7/gfs-ds
> end-volume
>
> # posix locks
> volume gfs-ds-locks
>  type features/posix-locks
>  subvolumes gfs-ds
> end-volume
>
> volume gfs-ds-threads
>  type performance/io-threads
>  option thread-count 1
>  option cache-size 32MB
>  subvolumes gfs-ds-locks
> end-volume
>
> volume server
>  type protocol/server
>  option transport-type tcp/server
>  subvolumes gfs-ds-threads
>  # storage network access only
>  option auth.ip.gfs-ds-threads.allow *
>  option auth.ip.gfs-ds-afr.allow *
> end-volume
>
>
> # dataspace on storage2
> volume gfs-storage2-ds
>  type protocol/client
>  option transport-type tcp/client
>  option remote-host <the other node's IP>  # storage network
>  option remote-subvolume gfs-ds-threads
>  option transport-timeout 10           # value in seconds; it should be
> set relatively low
> end-volume
>
> # automatic file replication translator for dataspace
> volume gfs-ds-afr
>  type cluster/afr
>  subvolumes gfs-ds-locks gfs-storage2-ds         # local and remote
> dataspaces
> end-volume
>
> volume writebehind
>  type performance/write-behind
>  option aggregate-size 128kB
>  subvolumes gfs-ds-afr
> end-volume
>
> volume readahead
>  type performance/read-ahead
>  option page-size 64kB
>  option page-count 16
>  subvolumes writebehind
> end-volume
> -------------
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
>

-- 
Raghavendra G

A centipede was happy quite, until a toad in fun,
Said, "Prey, which leg comes after which?",
This raised his doubts to such a pitch,
He fell flat into the ditch,
Not knowing how to run.
-Anonymous
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20080808/b3906def/attachment.html>