[Gluster-devel] [Gluster-users] "Transport endpoint is not connected" error + long list of files to be healed

Ashish Pandey aspandey at redhat.com
Wed Nov 13 19:05:56 UTC 2019


Hi Mauro, 

Yes, it will take time to heal these files and time depends on the number of file/dir you have created and the amount of data you have written while the 
bricks were down. 

YOu can just run following command and keep observing that the count is changing or not - 

gluster volume heal tier2 info | grep entries 

--- 
Ashish 

----- Original Message -----

From: "Mauro Tridici" <mauro.tridici at cmcc.it> 
To: "Gluster Devel" <gluster-devel at gluster.org> 
Cc: "Gluster-users" <gluster-users at gluster.org> 
Sent: Wednesday, November 13, 2019 7:00:37 PM 
Subject: [Gluster-users] "Transport endpoint is not connected" error + long list of files to be healed 

Dear All, 

our GlusterFS filesystem was showing some problem during some simple users actions (for example, during directory or file creation). 




mkdir -p test 
mkdir: impossibile creare la directory `test': Transport endpoint is not connected 




After received some users notification, I investigated about the issue and I detected that 3 bricks (each one in a separate gluster servers) were down. 
So, I forced the bricks to be up using “gluster vol start tier force” and bricks come back successfully. All the bricks are up. 

Anyway, I see from “gluster vol status” command output that also 2 self-heal daemons were down and I had to restart daemons to fix the problem. 
Now, everything seems to be ok watching the output of “gluster vol status” and I can create a test directory on the file system. 

But, during the last check made using “gluster volume heal tier2 info”, I saw a long list of files and directories that need to be healed. 
The list is very long and the command output is still going ahead on my terminal. 

What I can do to fix this issue? Does the self-heal feature fix automatically each files that need to be healed? 
Could you please help me to understand what I need to do in this case? 

You can find below some information about our GlusterFS configuration: 

Volume Name: tier2 
Type: Distributed-Disperse 
Volume ID: a28d88c5-3295-4e35-98d4-210b3af9358c 
Status: Started 
Snapshot Count: 0 
Number of Bricks: 12 x (4 + 2) = 72 
Transport-type: tcp 

Thank you in advance. 
Regards, 
Mauro 

________ 

Community Meeting Calendar: 

APAC Schedule - 
Every 2nd and 4th Tuesday at 11:30 AM IST 
Bridge: https://bluejeans.com/118564314 

NA/EMEA Schedule - 
Every 1st and 3rd Tuesday at 01:00 PM EDT 
Bridge: https://bluejeans.com/118564314 

Gluster-users mailing list 
Gluster-users at gluster.org 
https://lists.gluster.org/mailman/listinfo/gluster-users 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-devel/attachments/20191113/bca9847e/attachment.html>


More information about the Gluster-devel mailing list