[Gluster-devel] [Gluster-users] VMs blocked for more than 120 seconds
kdhananj at redhat.com
Mon May 13 08:20:14 UTC 2019
OK. In that case, can you check if the following two changes help:
# gluster volume set $VOL network.remote-dio off
# gluster volume set $VOL performance.strict-o-direct on
preferably one option changed at a time, its impact tested and then the
next change applied and tested.
Also, gluster version please?
On Mon, May 13, 2019 at 1:02 PM Martin Toth <snowmailer at gmail.com> wrote:
> Cache in qemu is none. That should be correct. This is full command :
> /usr/bin/qemu-system-x86_64 -name one-312 -S -machine
> pc-i440fx-xenial,accel=kvm,usb=off -m 4096 -realtime mlock=off -smp
> 4,sockets=4,cores=1,threads=1 -uuid e95a774e-a594-4e98-b141-9f30a3f848c1
> -no-user-config -nodefaults -chardev
> -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime
> -no-shutdown -boot order=c,menu=on,splash-time=3000,strict=on -device
> -device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x4
> -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x5
> -drive file=/var/lib/one//datastores/116/312/*disk.0*
> -drive file=gluster://localhost:24007/imagestore/
> -drive file=/var/lib/one//datastores/116/312/*disk.1*
> -device ide-cd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0
> -netdev tap,fd=26,id=hostnet0
> -device e1000,netdev=hostnet0,id=net0,mac=02:00:5c:f0:e4:39,bus=pci.0,addr=0x3
> -chardev pty,id=charserial0 -device
> -chardev socket,id=charchannel0,path=/var/lib/libvirt/qemu/channel/target/domain-one-312/org.qemu.guest_agent.0,server,nowait
> -vnc 0.0.0.0:312,password -device cirrus-vga,id=video0,bus=pci.0,addr=0x2
> -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x7 -msg timestamp=on
> I’ve highlighted disks. First is VM context disk - Fuse used, second is
> SDA (OS is installed here) - libgfapi used, third is SWAP - Fuse used.
> I will start profiling on Gluster Volumes and wait for next VM to fail.
> Than I will attach/send profiling info after some VM will be failed. I
> suppose this is correct profiling strategy.
About this, how many vms do you need to recreate it? A single vm? Or
multiple vms doing IO in parallel?
> On 13 May 2019, at 09:21, Krutika Dhananjay <kdhananj at redhat.com> wrote:
> Also, what's the caching policy that qemu is using on the affected vms?
> Is it cache=none? Or something else? You can get this information in the
> command line of qemu-kvm process corresponding to your vm in the ps output.
> On Mon, May 13, 2019 at 12:49 PM Krutika Dhananjay <kdhananj at redhat.com>
>> What version of gluster are you using?
>> Also, can you capture and share volume-profile output for a run where you
>> manage to recreate this issue?
>> Let me know if you have any questions.
>> On Mon, May 13, 2019 at 12:34 PM Martin Toth <snowmailer at gmail.com>
>>> there is no healing operation, not peer disconnects, no readonly
>>> filesystem. Yes, storage is slow and unavailable for 120 seconds, but why,
>>> its SSD with 10G, performance is good.
>>> > you'd have it's log on qemu's standard output,
>>> If you mean /var/log/libvirt/qemu/vm.log there is nothing. I am looking
>>> for problem for more than month, tried everything. Can’t find anything. Any
>>> more clues or leads?
>>> > On 13 May 2019, at 08:55, lemonnierk at ulrar.net wrote:
>>> > On Mon, May 13, 2019 at 08:47:45AM +0200, Martin Toth wrote:
>>> >> Hi all,
>>> > Hi
>>> >> I am running replica 3 on SSDs with 10G networking, everything works
>>> OK but VMs stored in Gluster volume occasionally freeze with “Task XY
>>> blocked for more than 120 seconds”.
>>> >> Only solution is to poweroff (hard) VM and than boot it up again. I
>>> am unable to SSH and also login with console, its stuck probably on some
>>> disk operation. No error/warning logs or messages are store in VMs logs.
>>> > As far as I know this should be unrelated, I get this during heals
>>> > without any freezes, it just means the storage is slow I think.
>>> >> KVM/Libvirt(qemu) using libgfapi and fuse mount to access VM disks on
>>> replica volume. Can someone advice how to debug this problem or what can
>>> cause these issues?
>>> >> It’s really annoying, I’ve tried to google everything but nothing
>>> came up. I’ve tried changing virtio-scsi-pci to virtio-blk-pci disk
>>> drivers, but its not related.
>>> > Any chance your gluster goes readonly ? Have you checked your gluster
>>> > logs to see if maybe they lose each other some times ?
>>> > /var/log/glusterfs
>>> > For libgfapi accesses you'd have it's log on qemu's standard output,
>>> > that might contain the actual error at the time of the freez.
>>> > _______________________________________________
>>> > Gluster-users mailing list
>>> > Gluster-users at gluster.org
>>> > https://lists.gluster.org/mailman/listinfo/gluster-users
>>> Gluster-users mailing list
>>> Gluster-users at gluster.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Gluster-devel