[Gluster-devel] Quota Used Value Incorrect - Fix now or after upgrade
Sanoj Unnikrishnan
sunnikri at redhat.com
Fri Sep 1 11:33:50 UTC 2017
Hi Mathew,
The other option is to explicitly remove the size and contri xattr at the
brick path and then do a stat from the mount point.
#setfattr -x
trusted.glusterfs.quota.00000000-0000-0000-0000-000000000001.contri.1
<brick path /dir>
#setfattr -x trusted.glusterfs.quota.size.1 <brick path / dir>
#stat <mount path /dir>
Stat would heal the size and the contri xattr and the dirty xattr would
heal only on the next operation on the directory.
After this you could set dirty bit and do a stat again.
setxattr -n trusted.glusterfs.quota.dirty -v 0x3100 <brick path / dir>
stat <mount path /dir>
Regards,
Sanoj
On Thu, Aug 31, 2017 at 9:12 PM, Matthew B <matthew.has.questions at gmail.com>
wrote:
> Hi Raghavendra,
>
> I didn't get a chance to implement your suggestions, however it looks like
> the dirty bit is no longer set - so presumably the quota should have been
> updated, however the quota.size attribute is still incorrect though
> slightly different than before. Any other suggestions?
>
> [root at gluster07 ~]# getfattr --absolute-names -m . -d -e hex
> /mnt/raid6-storage/storage/data/projects/MEOPAR
> # file: /mnt/raid6-storage/storage/data/projects/MEOPAR
> security.selinux=0x73797374656d5f753a6f626a6563
> 745f723a756e6c6162656c65645f743a733000
> trusted.gfid=0x7209b677f4b94d82a3820733620e6929
> trusted.glusterfs.6f95525a-94d7-4174-bac4-e1a18fe010a2.
> xtime=0x599f228800088654
> trusted.glusterfs.dht=0x0000000100000000b6db6d41db6db6ee
> trusted.glusterfs.quota.d5a5ecda-7511-4bbb-9b4c-4fcc84e3e1da.contri=
> 0xfffffa3d7c28f60000000000000a9d0a000000000005fd2f
> trusted.glusterfs.quota.dirty=0x3000
> trusted.glusterfs.quota.limit-set=0x0000088000000000ffffffffffffffff
> trusted.glusterfs.quota.size=0xfffffa3d7c28f60000000000000a
> 9d0a000000000005fd2f
>
> Thanks,
> -Matthew
>
> On Mon, Aug 28, 2017 at 8:05 PM, Raghavendra Gowdappa <rgowdapp at redhat.com
> > wrote:
>
>>
>>
>> ----- Original Message -----
>> > From: "Matthew B" <matthew.has.questions at gmail.com>
>> > To: "Sanoj Unnikrishnan" <sunnikri at redhat.com>
>> > Cc: "Raghavendra Gowdappa" <rgowdapp at redhat.com>, "Gluster Devel" <
>> gluster-devel at gluster.org>
>> > Sent: Monday, August 28, 2017 9:33:25 PM
>> > Subject: Re: [Gluster-devel] Quota Used Value Incorrect - Fix now or
>> after upgrade
>> >
>> > Hi Sanoj,
>> >
>> > Thank you for the information - I have applied the changes you specified
>> > above - but I haven't seen any changes in the xattrs on the directory
>> after
>> > about 15 minutes:
>>
>> I think stat is served from cache - either gluster's md-cache or kernel
>> attribute cache. For healing to happen we need to force a lookup (which we
>> had hoped would be issued as part of stat cmd) and this lookup has to reach
>> marker xlator loaded on bricks. To make sure a lookup on the directory
>> reaches marker we need to:
>>
>> 1. Turn off kernel attribute and entry cache (using --entrytimeout=0 and
>> --attribute-timeout=0 as options to glusterfs while mounting)
>> 2. Turn off md-cache using gluster cli (gluster volume set
>> performance.md-cache <volname> off)
>> 3. Turn off readdirplus in the entire stack [1]
>>
>> Once the above steps are done I guess doing a stat results in a lookup on
>> the directory witnessed by marker. Once the issue is fixed you can undo the
>> above three steps so that performance is not affected in your setup.
>>
>> [1] http://nongnu.13855.n7.nabble.com/Turning-off-readdirp-in-th
>> e-entire-stack-on-fuse-mount-td220297.html
>>
>> >
>> > [root at gluster07 ~]# setfattr -n trusted.glusterfs.quota.dirty -v 0x3100
>> > /mnt/raid6-storage/storage/data/projects/MEOPAR/
>> >
>> > [root at gluster07 ~]# stat /mnt/raid6-storage/storage/dat
>> a/projects/MEOPAR
>> >
>> > [root at gluster07 ~]# getfattr --absolute-names -m . -d -e hex
>> > /mnt/raid6-storage/storage/data/projects/MEOPAR
>> > # file: /mnt/raid6-storage/storage/data/projects/MEOPAR
>> > security.selinux=0x73797374656d5f753a6f626a6563745f723a756e6
>> c6162656c65645f743a733000
>> > trusted.gfid=0x7209b677f4b94d82a3820733620e6929
>> > trusted.glusterfs.6f95525a-94d7-4174-bac4-e1a18fe010a2.xtime
>> =0x599f228800088654
>> > trusted.glusterfs.dht=0x0000000100000000b6db6d41db6db6ee
>> > trusted.glusterfs.quota.d5a5ecda-7511-4bbb-9b4c-4fcc84e3e1da
>> .contri=0xfffffa3d7c1ba60000000000000a9ccb000000000005fd2f
>> > trusted.glusterfs.quota.dirty=0x3100
>> > trusted.glusterfs.quota.limit-set=0x0000088000000000ffffffffffffffff
>> > trusted.glusterfs.quota.size=0xfffffa3d7c1ba60000000000000a9
>> ccb000000000005fd2f
>> >
>> > [root at gluster07 ~]# gluster volume status storage
>> > Status of volume: storage
>> > Gluster process TCP Port RDMA Port
>> Online Pid
>> > ------------------------------------------------------------
>> ------------------
>> > Brick 10.0.231.50:/mnt/raid6-storage/storag
>> > e 49159 0 Y
>> > 2160
>> > Brick 10.0.231.51:/mnt/raid6-storage/storag
>> > e 49153 0 Y
>> > 16037
>> > Brick 10.0.231.52:/mnt/raid6-storage/storag
>> > e 49159 0 Y
>> > 2298
>> > Brick 10.0.231.53:/mnt/raid6-storage/storag
>> > e 49154 0 Y
>> > 9038
>> > Brick 10.0.231.54:/mnt/raid6-storage/storag
>> > e 49153 0 Y
>> > 32284
>> > Brick 10.0.231.55:/mnt/raid6-storage/storag
>> > e 49153 0 Y
>> > 14840
>> > Brick 10.0.231.56:/mnt/raid6-storage/storag
>> > e 49152 0 Y
>> > 29389
>> > NFS Server on localhost 2049 0 Y
>> > 29421
>> > Quota Daemon on localhost N/A N/A Y
>> > 29438
>> > NFS Server on 10.0.231.51 2049 0 Y
>> > 18249
>> > Quota Daemon on 10.0.231.51 N/A N/A Y
>> > 18260
>> > NFS Server on 10.0.231.55 2049 0 Y
>> > 24128
>> > Quota Daemon on 10.0.231.55 N/A N/A Y
>> > 24147
>> > NFS Server on 10.0.231.54 2049 0 Y
>> > 9397
>> > Quota Daemon on 10.0.231.54 N/A N/A Y
>> > 9406
>> > NFS Server on 10.0.231.53 2049 0 Y
>> > 18387
>> > Quota Daemon on 10.0.231.53 N/A N/A Y
>> > 18397
>> > NFS Server on 10.0.231.52 2049 0 Y
>> > 2230
>> > Quota Daemon on 10.0.231.52 N/A N/A Y
>> > 2262
>> > NFS Server on 10.0.231.50 2049 0 Y
>> > 2113
>> > Quota Daemon on 10.0.231.50 N/A N/A Y
>> > 2154
>> >
>> > Task Status of Volume storage
>> > ------------------------------------------------------------
>> ------------------
>> > There are no active volume tasks
>> >
>> > [root at gluster07 ~]# gluster volume quota storage list | egrep "MEOPAR "
>> > /data/projects/MEOPAR 8.5TB 80%(6.8TB)
>> 16384.0PB
>> > 17.4TB No No
>> >
>> >
>> >
>> >
>> > Looking at the quota daemon on gluster07:
>> >
>> > [root at gluster07 ~]# ps -f -p 29438
>> > UID PID PPID C STIME TTY TIME CMD
>> > root 29438 1 0 Jun19 ? 04:43:31 /usr/sbin/glusterfs -s
>> > localhost --volfile-id gluster/quotad -p
>> > /var/lib/glusterd/quotad/run/quotad.pid -l
>> /var/log/glusterfs/quotad.log
>> >
>> > I can see some errors on the log - not sure if those are related:
>> >
>> > [root at gluster07 ~]# tail /var/log/glusterfs/quotad.log
>> > [2017-08-28 15:36:17.990909] W [dict.c:592:dict_unref]
>> > (-->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(qd
>> _lookup_cbk+0x35e)
>> > [0x7f79fb09253e]
>> > -->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(quo
>> tad_aggregator_getlimit_cbk+0xb3)
>> > [0x7f79fb093333] -->/lib64/libglusterfs.so.0(dict_unref+0x99)
>> > [0x7f7a090299e9] ) 0-dict: dict is NULL [Invalid argument]
>> > [2017-08-28 15:36:17.991389] W [dict.c:592:dict_unref]
>> > (-->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(qd
>> _lookup_cbk+0x35e)
>> > [0x7f79fb09253e]
>> > -->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(quo
>> tad_aggregator_getlimit_cbk+0xb3)
>> > [0x7f79fb093333] -->/lib64/libglusterfs.so.0(dict_unref+0x99)
>> > [0x7f7a090299e9] ) 0-dict: dict is NULL [Invalid argument]
>> > [2017-08-28 15:36:17.992656] W [dict.c:592:dict_unref]
>> > (-->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(qd
>> _lookup_cbk+0x35e)
>> > [0x7f79fb09253e]
>> > -->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(quo
>> tad_aggregator_getlimit_cbk+0xb3)
>> > [0x7f79fb093333] -->/lib64/libglusterfs.so.0(dict_unref+0x99)
>> > [0x7f7a090299e9] ) 0-dict: dict is NULL [Invalid argument]
>> > [2017-08-28 15:36:17.993235] W [dict.c:592:dict_unref]
>> > (-->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(qd
>> _lookup_cbk+0x35e)
>> > [0x7f79fb09253e]
>> > -->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(quo
>> tad_aggregator_getlimit_cbk+0xb3)
>> > [0x7f79fb093333] -->/lib64/libglusterfs.so.0(dict_unref+0x99)
>> > [0x7f7a090299e9] ) 0-dict: dict is NULL [Invalid argument]
>> > [2017-08-28 15:45:51.024756] W [dict.c:592:dict_unref]
>> > (-->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(qd
>> _lookup_cbk+0x35e)
>> > [0x7f79fb09253e]
>> > -->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(quo
>> tad_aggregator_getlimit_cbk+0xb3)
>> > [0x7f79fb093333] -->/lib64/libglusterfs.so.0(dict_unref+0x99)
>> > [0x7f7a090299e9] ) 0-dict: dict is NULL [Invalid argument]
>> > [2017-08-28 15:45:51.027871] W [dict.c:592:dict_unref]
>> > (-->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(qd
>> _lookup_cbk+0x35e)
>> > [0x7f79fb09253e]
>> > -->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(quo
>> tad_aggregator_getlimit_cbk+0xb3)
>> > [0x7f79fb093333] -->/lib64/libglusterfs.so.0(dict_unref+0x99)
>> > [0x7f7a090299e9] ) 0-dict: dict is NULL [Invalid argument]
>> > [2017-08-28 15:45:51.030843] W [dict.c:592:dict_unref]
>> > (-->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(qd
>> _lookup_cbk+0x35e)
>> > [0x7f79fb09253e]
>> > -->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(quo
>> tad_aggregator_getlimit_cbk+0xb3)
>> > [0x7f79fb093333] -->/lib64/libglusterfs.so.0(dict_unref+0x99)
>> > [0x7f7a090299e9] ) 0-dict: dict is NULL [Invalid argument]
>> > [2017-08-28 15:45:51.031324] W [dict.c:592:dict_unref]
>> > (-->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(qd
>> _lookup_cbk+0x35e)
>> > [0x7f79fb09253e]
>> > -->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(quo
>> tad_aggregator_getlimit_cbk+0xb3)
>> > [0x7f79fb093333] -->/lib64/libglusterfs.so.0(dict_unref+0x99)
>> > [0x7f7a090299e9] ) 0-dict: dict is NULL [Invalid argument]
>> > [2017-08-28 15:45:51.032791] W [dict.c:592:dict_unref]
>> > (-->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(qd
>> _lookup_cbk+0x35e)
>> > [0x7f79fb09253e]
>> > -->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(quo
>> tad_aggregator_getlimit_cbk+0xb3)
>> > [0x7f79fb093333] -->/lib64/libglusterfs.so.0(dict_unref+0x99)
>> > [0x7f7a090299e9] ) 0-dict: dict is NULL [Invalid argument]
>> > [2017-08-28 15:45:51.033295] W [dict.c:592:dict_unref]
>> > (-->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(qd
>> _lookup_cbk+0x35e)
>> > [0x7f79fb09253e]
>> > -->/usr/lib64/glusterfs/3.7.13/xlator/features/quotad.so(quo
>> tad_aggregator_getlimit_cbk+0xb3)
>> > [0x7f79fb093333] -->/lib64/libglusterfs.so.0(dict_unref+0x99)
>> > [0x7f7a090299e9] ) 0-dict: dict is NULL [Invalid argument]
>> >
>> > How should I proceed?
>> >
>> > Thanks,
>> > -Matthew
>> >
>> > On Mon, Aug 28, 2017 at 3:13 AM, Sanoj Unnikrishnan <
>> sunnikri at redhat.com>
>> > wrote:
>> >
>> > > Hi Mathew,
>> > >
>> > > If you are sure that "/mnt/raid6-storage/storage/da
>> ta/projects/MEOPAR/"
>> > > is the only directory with wrong accounting and its immediate sub
>> > > directories have correct xattr values, Setting the dirty xattr and
>> doing a
>> > > stat after that should resolve the issue.
>> > >
>> > > 1) setxattr -n trusted.glusterfs.quota.dirty -v 0x3100
>> > > /mnt/raid6-storage/storage/data/projects/MEOPAR/
>> > >
>> > > 2) stat /mnt/raid6-storage/storage/data/projects/MEOPAR/
>> > >
>> > > Could you please share what kind of operations that happens on this
>> > > directory, to help RCA the issue.
>> > >
>> > > If you think this can be true elsewhere in filesystem as well,use the
>> > > following script to identify the same.
>> > >
>> > > 1) https://github.com/gluster/glusterfs/blob/master/extras/
>> > > quota/xattr_analysis.py
>> > > 2) https://github.com/gluster/glusterfs/blob/master/extras/
>> > > quota/log_accounting.sh
>> > >
>> > > Regards,
>> > > Sanoj
>> > >
>> > >
>> > >
>> > >
>> > > On Mon, Aug 28, 2017 at 12:39 PM, Raghavendra Gowdappa <
>> > > rgowdapp at redhat.com> wrote:
>> > >
>> > >> +sanoj
>> > >>
>> > >> ----- Original Message -----
>> > >> > From: "Matthew B" <matthew.has.questions at gmail.com>
>> > >> > To: gluster-devel at gluster.org
>> > >> > Sent: Saturday, August 26, 2017 12:45:19 AM
>> > >> > Subject: [Gluster-devel] Quota Used Value Incorrect - Fix now or
>> after
>> > >> upgrade
>> > >> >
>> > >> > Hello,
>> > >> >
>> > >> > I need some advice on fixing an issue with quota on my gluster
>> volume.
>> > >> It's
>> > >> > running version 3.7, distributed volume, with 7 nodes.
>> > >> >
>> > >> > # gluster --version
>> > >> > glusterfs 3.7.13 built on Jul 8 2016 15:26:18
>> > >> > Repository revision: git:// git.gluster.com/glusterfs.git
>> > >> > Copyright (c) 2006-2011 Gluster Inc. < http://www.gluster.com >
>> > >> > GlusterFS comes with ABSOLUTELY NO WARRANTY.
>> > >> > You may redistribute copies of GlusterFS under the terms of the GNU
>> > >> General
>> > >> > Public License.
>> > >> >
>> > >> > # gluster volume info storage
>> > >> >
>> > >> > Volume Name: storage
>> > >> > Type: Distribute
>> > >> > Volume ID: 6f95525a-94d7-4174-bac4-e1a18fe010a2
>> > >> > Status: Started
>> > >> > Number of Bricks: 7
>> > >> > Transport-type: tcp
>> > >> > Bricks:
>> > >> > Brick1: 10.0.231.50:/mnt/raid6-storage/storage
>> > >> > Brick2: 10.0.231.51:/mnt/raid6-storage/storage
>> > >> > Brick3: 10.0.231.52:/mnt/raid6-storage/storage
>> > >> > Brick4: 10.0.231.53:/mnt/raid6-storage/storage
>> > >> > Brick5: 10.0.231.54:/mnt/raid6-storage/storage
>> > >> > Brick6: 10.0.231.55:/mnt/raid6-storage/storage
>> > >> > Brick7: 10.0.231.56:/mnt/raid6-storage/storage
>> > >> > Options Reconfigured:
>> > >> > changelog.changelog: on
>> > >> > geo-replication.ignore-pid-check: on
>> > >> > geo-replication.indexing: on
>> > >> > nfs.disable: no
>> > >> > performance.readdir-ahead: on
>> > >> > features.quota: on
>> > >> > features.inode-quota: on
>> > >> > features.quota-deem-statfs: on
>> > >> > features.read-only: off
>> > >> >
>> > >> > # df -h /storage/
>> > >> > Filesystem Size Used Avail Use% Mounted on
>> > >> > 10.0.231.50:/storage 255T 172T 83T 68% /storage
>> > >> >
>> > >> >
>> > >> > I am planning to upgrade to 3.10 (or 3.12 when it's available) but
>> I
>> > >> have a
>> > >> > number of quotas configured, and one of them (below) has a very
>> wrong
>> > >> "Used"
>> > >> > value:
>> > >> >
>> > >> > # gluster volume quota storage list | egrep "MEOPAR "
>> > >> > /data/projects/MEOPAR 8.5TB 80%(6.8TB) 16384.0PB 17.4TB No No
>> > >> >
>> > >> >
>> > >> > I have confirmed the bad value appears in one of the bricks current
>> > >> xattrs,
>> > >> > and it looks like the issue has been encountered previously on
>> bricks
>> > >> 04,
>> > >> > 03, and 06: (gluster07 does not have a
>> trusted.glusterfs.quota.size.1
>> > >> as it
>> > >> > was recently added)
>> > >> >
>> > >> > $ ansible -i hosts gluster-servers[0:6] -u <user> --ask-pass -m
>> shell -b
>> > >> > --become-method=sudo --ask-become-pass -a "getfattr
>> --absolute-names -m
>> > >> . -d
>> > >> > -e hex /mnt/raid6-storage/storage/data/projects/MEOPAR | egrep
>> > >> > '^trusted.glusterfs.quota.size'"
>> > >> > SSH password:
>> > >> > SUDO password[defaults to SSH password]:
>> > >> >
>> > >> > gluster02 | SUCCESS | rc=0 >>
>> > >> > trusted.glusterfs.quota.size=0x0000011ecfa56c00000000000005c
>> > >> d6d000000000006d478
>> > >> > trusted.glusterfs.quota.size.1=0x0000010ad4a4520000000000000
>> > >> 12a0300000000000150fa
>> > >> >
>> > >> > gluster05 | SUCCESS | rc=0 >>
>> > >> > trusted.glusterfs.quota.size=0x00000033b8e92200000000000004c
>> > >> de8000000000006b1a4
>> > >> > trusted.glusterfs.quota.size.1=0x0000010dca277c0000000000000
>> > >> 1297d0000000000015005
>> > >> >
>> > >> > gluster01 | SUCCESS | rc=0 >>
>> > >> > trusted.glusterfs.quota.size=0x0000003d4d4348000000000000057
>> > >> 616000000000006afd2
>> > >> > trusted.glusterfs.quota.size.1=0x00000133fe211e0000000000000
>> > >> 5d161000000000006cfd4
>> > >> >
>> > >> > gluster04 | SUCCESS | rc=0 >>
>> > >> > trusted.glusterfs.quota.size=0xffffff396f3e9400000000000004d
>> > >> 7ea0000000000068c62
>> > >> > trusted.glusterfs.quota.size.1=0x00000106e672480000000000000
>> > >> 1138f0000000000012fb2
>> > >> >
>> > >> > gluster03 | SUCCESS | rc=0 >>
>> > >> > trusted.glusterfs.quota.size=0xfffffd02acabf0000000000000035
>> > >> 99000000000000643e2
>> > >> > trusted.glusterfs.quota.size.1=0x00000114e20f5e0000000000000
>> > >> 113b30000000000012fb2
>> > >> >
>> > >> > gluster06 | SUCCESS | rc=0 >>
>> > >> > trusted.glusterfs.quota.size=0xffffff0c98de44000000000000053
>> > >> 6e40000000000068cf2
>> > >> > trusted.glusterfs.quota.size.1=0x0000013532664e0000000000000
>> > >> 5e73f000000000006cfd4
>> > >> >
>> > >> > gluster07 | SUCCESS | rc=0 >>
>> > >> > trusted.glusterfs.quota.size=0xfffffa3d7c1ba60000000000000a9
>> > >> ccb000000000005fd2f
>> > >> >
>> > >> > And reviewing the subdirectories of that folder on the impacted
>> server
>> > >> you
>> > >> > can see that none of the direct children have such incorrect
>> values:
>> > >> >
>> > >> > [root at gluster07 ~]# getfattr --absolute-names -m . -d -e hex
>> > >> > /mnt/raid6-storage/storage/data/projects/MEOPAR/*
>> > >> > # file: /mnt/raid6-storage/storage/data/projects/MEOPAR/<dir1 >
>> > >> > ...
>> > >> > trusted.glusterfs.quota.7209b677-f4b9-4d82-a382-0733620e6929
>> > >> .contri=0x000000fb6841820000000000000074730000000000000dae
>> > >> > trusted.glusterfs.quota.dirty=0x3000
>> > >> > trusted.glusterfs.quota.size=0x000000fb684182000000000000007
>> > >> 4730000000000000dae
>> > >> >
>> > >> > # file: /mnt/raid6-storage/storage/data/projects/MEOPAR/<dir2 >
>> > >> > ...
>> > >> > trusted.glusterfs.quota.7209b677-f4b9-4d82-a382-0733620e6929
>> > >> .contri=0x0000000416d5f4000000000000000baa0000000000000441
>> > >> > trusted.glusterfs.quota.dirty=0x3000
>> > >> > trusted.glusterfs.quota.limit-set=0x0000010000000000ffffffff
>> ffffffff
>> > >> > trusted.glusterfs.quota.size=0x0000000416d5f4000000000000000
>> > >> baa0000000000000441
>> > >> >
>> > >> > # file: /mnt/raid6-storage/storage/data/projects/MEOPAR/<dir3>
>> > >> > ...
>> > >> > trusted.glusterfs.quota.7209b677-f4b9-4d82-a382-0733620e6929
>> > >> .contri=0x000000110f2c4e00000000000002a76a000000000006ad7d
>> > >> > trusted.glusterfs.quota.dirty=0x3000
>> > >> > trusted.glusterfs.quota.limit-set=0x0000020000000000ffffffff
>> ffffffff
>> > >> > trusted.glusterfs.quota.size=0x000000110f2c4e00000000000002a
>> > >> 76a000000000006ad7d
>> > >> >
>> > >> >
>> > >> > Can I fix this on the current version of gluster (3.7) on just the
>> one
>> > >> brick
>> > >> > before I upgrade? Or would I be better off upgrading to 3.10 and
>> trying
>> > >> to
>> > >> > fix it then?
>> > >> >
>> > >> > I have reviewed information here:
>> > >> >
>> > >> > http://lists.gluster.org/pipermail/gluster-devel/2016-Februa
>> > >> ry/048282.html
>> > >> > http://lists.gluster.org/pipermail/gluster-users.old/2016-
>> > >> September/028365.html
>> > >> >
>> > >> > It seems like since I am on Gluster 3.7 I can disable quotas and
>> > >> re-enable
>> > >> > and everything will get recalculated and increment the index on the
>> > >> > quota.size xattr. But with the size of the volume that will take a
>> very
>> > >> long
>> > >> > time.
>> > >> >
>> > >> > Could I simply mark the impacted directly as dirty on gluster07? Or
>> > >> update
>> > >> > the xattr directly as the sum of the size of dir1, 2, and 3?
>> > >> >
>> > >> > Thanks,
>> > >> > -Matthew
>> > >> >
>> > >> > _______________________________________________
>> > >> > Gluster-devel mailing list
>> > >> > Gluster-devel at gluster.org
>> > >> > http://lists.gluster.org/mailman/listinfo/gluster-devel
>> > >>
>> > >
>> > >
>> >
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gluster.org/pipermail/gluster-devel/attachments/20170901/75ddfe25/attachment-0001.html>
More information about the Gluster-devel
mailing list