[Gluster-devel] Issue about the size of fstat is less than the really size of the syslog file

Raghavendra Gowdappa rgowdapp at redhat.com
Thu Oct 13 12:57:58 UTC 2016



----- Original Message -----
> From: "George Lian (Nokia - CN/Hangzhou)" <george.lian at nokia.com>
> To: Gluster-devel at gluster.org
> Cc: "I_EXT_MBB_WCDMA_SWD3_DA1_MATRIX_GMS" <I_EXT_MBB_WCDMA_SWD3_DA1_MATRIX at internal.nsn.com>, "Bingxuan Zhang (Nokia
> - CN/Hangzhou)" <bingxuan.zhang at nokia.com>, "Jan Zizka (Nokia - CZ/Prague)" <jan.zizka at nokia.com>
> Sent: Thursday, October 13, 2016 2:33:53 PM
> Subject: [Gluster-devel] Issue about the size of fstat is less than the really size of the syslog file
> 
> Hi, Dear Expert,
> We have use glusterfs as a network filesystem, and syslog store in there,
> some clients on different host may write the syslog file via “glusterfs”
> mount point.
> Now we encounter an issue when we “tail” the syslog file, it will occasional
> failed with error “ file truncated ”
> As we study and trace with the “tail” source code, it failed with the
> following code:
> if ( S_ISREG (mode) && stats.st_size < f[i].size )
> {
> error (0, 0, _("%s: file truncated"), quotef (name));
> /* Assume the file was truncated to 0,
> and therefore output all "new" data. */
> xlseek (fd, 0, SEEK_SET, name);
> f[i].size = 0;
> }
> When stats.st_size < f[i].size, what mean the size report by fstat is less
> than “tail” had read, it lead to “file truncated”, we also use “strace”
> tools to trace the tail application, the related tail strace log as the
> below:
> nanosleep({1, 0}, NULL) = 0
> fstat(3, {st_mode=S_IFREG|0644, st_size=192543105, ...}) = 0
> nanosleep({1, 0}, NULL) = 0
> fstat(3, {st_mode=S_IFREG|0644, st_size=192543105, ...}) = 0
> nanosleep({1, 0}, NULL) = 0
> fstat(3, {st_mode=S_IFREG|0644, st_size=192543105, ...}) = 0
> nanosleep({1, 0}, NULL) = 0
> fstat(3, {st_mode=S_IFREG|0644, st_size=192544549, ...}) = 0
> read(3, " Data … -"..., 8192) = 1444
> read(3, " Data.. "..., 8192) = 720
> read(3, "", 8192) = 0
> fstat(3, {st_mode=S_IFREG|0644, st_size=192544789, ...}) = 0
> write(1, “DATA…..” ) = 2164
> write(2, "tail: ", 6tail: ) = 6
> write(2, "/mnt/log/master/syslog: file tru"..., 38/mnt/log/master/syslog:
> file truncated) = 38
> as the above strace log, tail has read 1444+720=2164 bytes,
> but fstat tell “tail” 192544789 – 192543105 = 1664 which less than 2164, so
> it lead to “tail” application “file truncated”.
> And if we turn off “write-behind” feature, the issue will not be reproduced
> any more.

That seems strange. There are no writes happening on the fd/inode through which tail is reading/stating from. So, it seems strange that write-behind is involved here. I suspect whether any of md-cache/read-ahead/io-cache is causing the issue. Can you,

1. Turn off md-cache, read-ahead, io-cache xlators
2. mount glusterfs with --attribute-timeout=0
3. set write-behind on

and rerun the tests? If you don't hit the issue, you can experiment by turning on/off of md-cache, read-ahead and io-cache translators and see what are the minimal number of xlators that need to be turned off to not hit the issue (with write-behind on)?

regards,
Raghavendra

> So we think it may be related to cache consistence issue due to performance
> consider, but we still have concern that:
> The syslog file is used only with “Append” mode, so the size of file
> shouldn’t be reduced, when a client read the file, why “fstat” can’t return
> the really size match to the cache?
> From current investigation, we doubt that the current implement of
> “glusterfs” has a bug on “fstat” when cache is on.
> Your comments is our highly appreciated!
> Thanks & Best Regards
> George
> 
> _______________________________________________
> Gluster-devel mailing list
> Gluster-devel at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-devel


More information about the Gluster-devel mailing list