[Gluster-devel] [smoke failure] Permission denied error while install-pygluypPYTHON
Karthik Subrahmanya
ksubrahm at redhat.com
Tue May 17 06:56:15 UTC 2016
Got the same issue while backporting to 3.8 branch. Can some one please have a look?
https://build.gluster.org/job/smoke/27834/console
Regards,
Karthik
----- Original Message -----
> From: "Aravinda" <avishwan at redhat.com>
> To: "Kaushal M" <kshlmster at gmail.com>
> Cc: "Gluster Devel" <gluster-devel at gluster.org>
> Sent: Friday, May 13, 2016 11:50:34 AM
> Subject: Re: [Gluster-devel] [smoke failure] Permission denied error while install-pygluypPYTHON
>
> Refreshed the patch to fix glupy, systemd and mount.glusterfs files.
> http://review.gluster.org/14315
> regards
> Aravinda
> On 05/13/2016 10:25 AM, Kaushal M wrote:
>
>
>
> On Fri, May 13, 2016 at 9:59 AM, Aravinda <avishwan at redhat.com> wrote:
>
>
>
> Sent patch to fix glupy installation issue.
> http://review.gluster.org/#/c/14315/ regards
> Aravinda
>
> On 05/12/2016 11:28 PM, Aravinda wrote:
>
> Sorry miss from my side. Updated list of files/dir which do not honour
> --prefix
>
> usr/lib/
> usr/lib/systemd
> usr/lib/systemd/system
> usr/lib/systemd/system/glusterd.service
> usr/lib/python2.7
> usr/lib/python2.7/site-packages
> usr/lib/python2.7/site-packages/gluster
> usr/lib/python2.7/site-packages/gluster/__init__.pyo
> usr/lib/python2.7/site-packages/gluster/__init__.pyc
> usr/lib/python2.7/site-packages/gluster/__init__.py
> usr/lib/python2.7/site-packages/gluster/glupy
> usr/lib/python2.7/site-packages/gluster/glupy/__init__.pyo
> usr/lib/python2.7/site-packages/gluster/glupy/__init__.pyc
> usr/lib/python2.7/site-packages/gluster/glupy/__init__.py
> sbin/
> sbin/mount.glusterfs
> Thanks for identifying the list of paths. We need to fix all of this.
> I've opened a bug [1] so that this can be correctly tracked and fixed.
>
> [1] https://bugzilla.redhat.com/show_bug.cgi?id=1335717
>
>
>
> Things I did to find above list.
> ./autogen.sh
> ./configure --prefix=/usr/local
> DESTDIR=/tmp/glusterfs make install
>
> Then listed all the files which are in /tmp/glusterfs except
> /tmp/glusterfs/usr/local
>
> regards
> Aravinda
>
> On 05/12/2016 08:56 PM, Aravinda wrote:
>
>
> regards
> Aravinda
>
> On 05/12/2016 08:23 PM, Niels de Vos wrote:
>
> On Thu, May 12, 2016 at 04:28:40PM +0530, Aravinda wrote:
>
> regards
> Aravinda
>
> On 05/12/2016 04:08 PM, Kaushal M wrote:
>
> The install path should be `$DESTDIR/$PREFIX/<path>`.
>
> PREFIX should be the path under which the file is going to be installed.
>
> Yes. That is substituted during ./configure if --prefix is passed, otherwise
> generated Makefile will have $prefix variable. I think glupy need to
> installed on /usr/lib/python2.6/site-packages/ to import python packages
> globally while testing. Same rule is used to deploy systemd unit files.
> (Prefix is not used)
>
> I'm not convinced about this yet. If someone decides to use --prefix, I
> think we should honour that everywhere. If that is not common, we can
> introduce an additional ./configure option for the uncommon use-cases
> like the Python site-packages.
>
> Do you have a reference where the --prefix option explains that some
> contents may not use it?
>
> Following files/dirs are not honoring prefix, I am not sure about the exact
> reason(for example, /var/log or /var/lib/glusterd)
>
> sbin
> sbin/mount.glusterfs
> usr/lib/
> usr/lib/systemd
> usr/lib/systemd/system
> usr/lib/systemd/system/glustereventsd.service
> usr/lib/systemd/system/glusterd.service
> usr/lib/python2.7
> usr/lib/python2.7/site-packages
> usr/lib/python2.7/site-packages/gluster
> usr/lib/python2.7/site-packages/gluster/__init__.pyo
> usr/lib/python2.7/site-packages/gluster/__init__.pyc
> usr/lib/python2.7/site-packages/gluster/__init__.py
> usr/lib/python2.7/site-packages/gluster/glupy
> usr/lib/python2.7/site-packages/gluster/glupy/__init__.pyo
> usr/lib/python2.7/site-packages/gluster/glupy/__init__.pyc
> usr/lib/python2.7/site-packages/gluster/glupy/__init__.py
> var/
> var/lib
> var/lib/glusterd
> var/lib/glusterd/glusterfind
> var/lib/glusterd/glusterfind/.keys
> var/lib/glusterd/groups
> var/lib/glusterd/groups/virt
> var/lib/glusterd/hooks
> var/lib/glusterd/hooks/1
> var/lib/glusterd/hooks/1/delete
> var/lib/glusterd/hooks/1/delete/post
> var/lib/glusterd/hooks/1/delete/post/S57glusterfind-delete-post.py
> var/lib/glusterd/hooks/1/gsync-create
> var/lib/glusterd/hooks/1/gsync-create/post
> var/lib/glusterd/hooks/1/gsync-create/post/S56glusterd-geo-rep-create-post.sh
> var/lib/glusterd/hooks/1/reset
> var/lib/glusterd/hooks/1/reset/post
> var/lib/glusterd/hooks/1/reset/post/S31ganesha-reset.sh
> var/lib/glusterd/hooks/1/stop
> var/lib/glusterd/hooks/1/stop/pre
> var/lib/glusterd/hooks/1/stop/pre/S30samba-stop.sh
> var/lib/glusterd/hooks/1/stop/pre/S29CTDB-teardown.sh
> var/lib/glusterd/hooks/1/start
> var/lib/glusterd/hooks/1/start/post
> var/lib/glusterd/hooks/1/start/post/S31ganesha-start.sh
> var/lib/glusterd/hooks/1/start/post/S30samba-start.sh
> var/lib/glusterd/hooks/1/start/post/S29CTDBsetup.sh
> var/lib/glusterd/hooks/1/set
> var/lib/glusterd/hooks/1/set/post
> var/lib/glusterd/hooks/1/set/post/S32gluster_enable_shared_storage.sh
> var/lib/glusterd/hooks/1/set/post/S30samba-set.sh
> var/lib/glusterd/hooks/1/add-brick
> var/lib/glusterd/hooks/1/add-brick/pre
> var/lib/glusterd/hooks/1/add-brick/pre/S28Quota-enable-root-xattr-heal.sh
> var/lib/glusterd/hooks/1/add-brick/post
> var/lib/glusterd/hooks/1/add-brick/post/disabled-quota-root-xattr-heal.sh
> var/log
> var/log/glusterfs
> var/run
> var/run/gluster
>
> Thanks,
> Niels
>
>
> DESTDIR is a way to make it easier to package builders to collect
> installed files.
> It shouldn't be used as an alternative to prefix. And I think software
> generally shouldn't be run from DESTDIR.
>
> More information is available at
> https://www.gnu.org/software/automake/manual/html_node/DESTDIR.html On Thu,
> May 12, 2016 at 3:55 PM, Aravinda <avishwan at redhat.com> wrote:
>
> regards
> Aravinda
>
> On 05/12/2016 02:33 PM, Niels de Vos wrote:
>
> On Thu, May 12, 2016 at 02:01:43PM +0530, Aravinda wrote:
>
> I checked the Makefile.am and configure.ac of glupy, looks good to me. I
> don't think we have issue in glupy.
>
> If we run make install with DESTDIR empty then
> `${DESTDIR}/usr/lib/python2.6/site-packages/gluster` will become
> /usr/lib/python2.6/site-packages/gluster. So we will get that error.
>
> For example,
> DESTDIR= make install
> or
> make install DESTDIR=
>
> Can we check how we are executing smoke test?
>
> I think it is this script, no DESTDIR in there:
> https://github.com/gluster/glusterfs-patch-acceptance-tests/blob/master/build.sh
> My guess is that the --prefix ./configure option is not honoured?
>
> DESTDIR will not get substitute during ./configure, it is used during make
> install. Once we run ./autogen.sh and ./configure(with whatever prefix),
> generated Makefile for glupy is
>
>
> install-pyglupyPYTHON: $(pyglupy_PYTHON)
> @$(NORMAL_INSTALL)
> @list='$(pyglupy_PYTHON)'; dlist=; list2=; test -n "$(pyglupydir)" ||
> list=; \
> if test -n "$$list"; then \
> echo " $(MKDIR_P) '$(DESTDIR)$(pyglupydir)'"; \
> $(MKDIR_P) "$(DESTDIR)$(pyglupydir)" || exit 1; \
> fi; \
> for p in $$list; do \
> if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
> if test -f $$b$$p; then \
> $(am__strip_dir) \
> dlist="$$dlist $$f"; \
> list2="$$list2 $$b$$p"; \
> else :; fi; \
> done; \
> for file in $$list2; do echo $$file; done | $(am__base_list) | \
> while read files; do \
> echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pyglupydir)'"; \
> $(INSTALL_DATA) $$files "$(DESTDIR)$(pyglupydir)" || exit $$?; \
> done || exit $$?; \
> if test -n "$$dlist"; then \
> $(am__py_compile) --destdir "$(DESTDIR)" \
> --basedir "$(pyglupydir)" $$dlist; \
> else :; fi
>
> If you run `make install` without destdir then it will install to machine's
> global path depending on prefix.(If this is the case then their is genuine
> "permission denied" error in the machine I think.
>
> If we are packaging or installing to custom target, we should pass DESTDIR.
>
> DESTDIR=/build/install make install
>
>
>
> Niels
>
>
> regards
> Aravinda
>
> On 05/12/2016 12:29 PM, Niels de Vos wrote:
>
> On Thu, May 12, 2016 at 01:14:07AM -0400, Raghavendra Gowdappa wrote:
> https://build.gluster.org/job/smoke/27674/console 06:09:06 /bin/mkdir:
> cannot create directory
> `/usr/lib/python2.6/site-packages/gluster': Permission denied
> 06:09:06 make[6]: *** [install-pyglupyPYTHON] Error 1
>
> This definitely is a bug in the installation of glupy. Nothing should
> get installed under /usr, teh installation process is instructed to do
> its install under /build/install.
>
> Did someone file a bug for this yet?
>
> Thanks,
> Niels
>
> 06:09:06 make[5]: *** [install-am] Error 2
> 06:09:06 make[4]: *** [install-recursive] Error 1
> 06:09:06 make[3]: *** [install-recursive] Error 1
> 06:09:06 make[2]: *** [install-recursive] Error 1
> 06:09:06 make[1]: *** [install-recursive] Error 1
> 06:09:06 make: *** [install-recursive] Error 1
> 06:09:06 Build step 'Execute shell' marked build as failure
> 06:09:06 Finished: FAILURE
>
> regards,
> Raghavendra
> _______________________________________________
> Gluster-devel mailing list Gluster-devel at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-devel
> _______________________________________________
> Gluster-devel mailing list Gluster-devel at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-devel
> _______________________________________________
> Gluster-devel mailing list Gluster-devel at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-devel
> _______________________________________________
> Gluster-devel mailing list Gluster-devel at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-devel
> _______________________________________________
> Gluster-devel mailing list Gluster-devel at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-devel
> _______________________________________________
> Gluster-devel mailing list Gluster-devel at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-devel
>
>
> _______________________________________________
> Gluster-devel mailing list
> Gluster-devel at gluster.org
> http://www.gluster.org/mailman/listinfo/gluster-devel
More information about the Gluster-devel
mailing list