[Gluster-devel] [Gluster-users] gluster volume heal info split brain command not showing files in split-brain

ABHISHEK PALIWAL abhishpaliwal at gmail.com
Wed Mar 23 06:46:58 UTC 2016 

On Wed, Mar 23, 2016 at 11:54 AM, Anuradha Talur <atalur at redhat.com> wrote:

>
>
> ----- Original Message -----
> > From: "ABHISHEK PALIWAL" <abhishpaliwal at gmail.com>
> > To: "Anuradha Talur" <atalur at redhat.com>
> > Cc: gluster-users at gluster.org, gluster-devel at gluster.org
> > Sent: Monday, March 21, 2016 10:44:53 AM
> > Subject: Re: [Gluster-users] gluster volume heal info split brain
> command not showing files in split-brain
> >
> > Hi Anuradha,
> >
> > Have you got any pointer from the above scenarios.
> >
> Hi Abhishek,
>
> I went through all the logs that you have given.
> There is only one brick's log in the info you provided,
> and for only one day. Where is the other brick's logfile?
>

I am sharing the latest failure /var/log/glusterfs from both of the brick's
in a single file named as glusterfs.txt with log-level=debug
1. In this file you get the logs for board A from line no 6 to 2241
2. from 2242 you will get the logs of board B

I have issued the cat on all files present in /var/log/glusterfs directory.

also there are two directory named as
coremp25(board B) - contains the /var/lib/glusterd contents
coremp03(board A)- contains the /var/lib/glusterd  contents

>
> In the same log file I see a lot of connects and disconnects in quick
> succession.
> Which could be the cause of gfid mismatch if I/O was going on during the
> time.
> The other logs that have been provided also do not have enough information
> to
> determine how your setup could have ended up with no pending markers.
>
How we can find out the pending markers?

>
> I understand that output from heal info split-brain is more easy to get
> info
> for files in split-brain. But without pending markers, this info cannot be
> obtained.
>
Please let me know if you required more logs.

>
> For second scenario, is your self-heal-daemon on?
>

Yes self-heal-daemon is no in this case.

Regards,
Abhishek

> > Regards,
> > Abhishek
> >
> > On Fri, Mar 18, 2016 at 11:18 AM, ABHISHEK PALIWAL <
> abhishpaliwal at gmail.com>
> > wrote:
> >
> > >
> > >
> > > On Fri, Mar 18, 2016 at 1:41 AM, Anuradha Talur <atalur at redhat.com>
> wrote:
> > >
> > >>
> > >>
> > >> ----- Original Message -----
> > >> > From: "ABHISHEK PALIWAL" <abhishpaliwal at gmail.com>
> > >> > To: "Anuradha Talur" <atalur at redhat.com>
> > >> > Cc: gluster-users at gluster.org, gluster-devel at gluster.org
> > >> > Sent: Thursday, March 17, 2016 4:00:58 PM
> > >> > Subject: Re: [Gluster-users] gluster volume heal info split brain
> > >> command not showing files in split-brain
> > >> >
> > >> > Hi Anuradha,
> > >> >
> > >> > Please confirm me, this is bug in glusterfs or we need to do
> something
> > >> at
> > >> > our end.
> > >> >
> > >> > Because this problem is stopping our development.
> > >> Hi Abhishek,
> > >>
> > >> When you say file is not getting sync, do you mean that the files are
> not
> > >> in sync after healing or that the existing GFID mismatch that you
> tried to
> > >> heal failed?
> > >> In one of the previous mails, you said that the GFID mismatch problem
> is
> > >> resolved, is it not so?
> > >>
> > >
> > > As I mentioned I have two scenario:
> > > 1. First scenario is where files are in split-brain but not recognized
> by
> > > the the split-brain and heal info commands. So we are identifying those
> > > file when I/O errors occurred on those files (the same method
> mentioned in
> > > the link which you shared earlier) but this method is not reliable in
> our
> > > case because other modules have the dependencies on this file and those
> > > modules can't wait until heal in progress. In this case we required
> manual
> > > identification of the file those are falling in I/O error which is
> somehow
> > > not the correct way. It is better if the split-brain or heal info
> command
> > > identify the files and based on the output we will perform the self
> healing
> > > on those files only.
> > >
> > > 2. Second scenario in which we have one log file which have the fixed
> size
> > > and wrapping of data properties and continuously written by the system
> even
> > > when the other brick is down or rebooting. In this case, we have two
> brick
> > > in replica mode and when one goes down and comes up but this file
> remains
> > > out of sync. We are not getting any of the following on this file:
> > > A. Not recognized by the split-brain and heal info command.
> > > B. Not getting any I/O error
> > > C. Do not have the GFID mismatch
> > >
> > > Here, are the getfattr output of this file
> > >
> > > Brick B which rebooted and have the file out of sync
> > >
> > > getfattr -d -m . -e hex
> > > opt/lvmdir/c2/brick/logfiles/availability/CELLO_AVAILABILITY2_LOG.xml
> > >
> > > # file:
> > > opt/lvmdir/c2/brick/logfiles/availability/CELLO_AVAILABILITY2_LOG.xml
> > > trusted.afr.c_glusterfs-client-1=0x000000000000000000000000
> > > trusted.afr.dirty=0x000000000000000000000000
> > > trusted.bit-rot.version=0x000000000000000b56d6dd1d000ec7a9
> > > trusted.gfid=0x9f5e354ecfda40149ddce7d5ffe760ae
> > >
> > >
> > > Brick A where file was getting updated when Brick B was rebooting
> > >
> > > getfattr -d -m . -e hex
> > > opt/lvmdir/c2/brick/logfiles/availability/CELLO_AVAILABILITY2_LOG.xml
> > > trusted.afr.c_glusterfs-client-0=0x000000080000000000000000
> > > trusted.afr.c_glusterfs-client-2=0x000000020000000000000000
> > > trusted.afr.c_glusterfs-client-4=0x000000020000000000000000
> > > trusted.afr.c_glusterfs-client-6=0x000000020000000000000000
> > > trusted.afr.dirty=0x000000000000000000000000
> > > trusted.bit-rot.version=0x000000000000000b56d6dcb7000c87e7
> > > trusted.gfid=0x9f5e354ecfda40149ddce7d5ffe760ae
> > >
> > > This scenario is not 100% reproducible but out of 20 cycle we can
> > > reproduce it one or two times.
> > >
> > >
> > >> To your question about finding the files in split-brain, can you try
> > >> running gluster volume heal <volname> info? Heal info is also
> supposed to
> > >> show
> > >> the files in split-brain.
> > >
> > >
> > > This heal info command is also not working.
> > >
> > >
> > >> If the GFID mismatch is not resolved yet, it would really help
> understand
> > >> the underlying problem if you give the output of getfattr -m. -de hex
> > >> <path-to-parent-directory-of-the-file-in-GFID-mismatch>.
> > >>
> > >
> > > It resolved the problem but we don't want to go with that solution
> > > (mentioned in the link provided by) we want the consistency and out
> come
> > > from the split-brain or heal info files.
> > >
> > > The output you are asking for parent directory I have already shared
> you
> > > in this mail chain. I am also attaching one more time for your
> reference.
> > >
> > > Please let me know if you have any query regarding the above scenarios.
> > >
> > > Regards,
> > > Abhishek
> > >
> > >> >
> > >> > Regards,
> > >> > Abhishek
> > >> >
> > >> > On Thu, Mar 17, 2016 at 1:54 PM, ABHISHEK PALIWAL <
> > >> abhishpaliwal at gmail.com>
> > >> > wrote:
> > >> >
> > >> > > Hi Anuradha,
> > >> > >
> > >> > > But in this case I need to do tail on each file which is time
> taking
> > >> > > process and other end I can't pause my module until these file is
> > >> getting
> > >> > > healed.
> > >> > >
> > >> > > Any how I need the output of the split-brain to resolve this
> problem.
> > >> > >
> > >> > > Regards,
> > >> > > Abhishek
> > >> > >
> > >> > > On Wed, Mar 16, 2016 at 6:21 PM, ABHISHEK PALIWAL <
> > >> abhishpaliwal at gmail.com
> > >> > > > wrote:
> > >> > >
> > >> > >> Hi Anuradha,
> > >> > >>
> > >> > >> The issue is resolved but we have one more issue something
> similar to
> > >> > >> this one in which the file is not getting sync after the steps
> > >> followed,
> > >> > >> mentioned in the link which you shared in the previous mail.
> > >> > >>
> > >> > >> And problem is that why split-brain command is not showing
> > >> split-brain
> > >> > >> entries.
> > >> > >>
> > >> > >> Regards,
> > >> > >> Abhishek
> > >> > >>
> > >> > >> On Wed, Mar 16, 2016 at 6:06 PM, Anuradha Talur <
> atalur at redhat.com>
> > >> > >> wrote:
> > >> > >>
> > >> > >>>
> > >> > >>>
> > >> > >>> ----- Original Message -----
> > >> > >>> > From: "Anuradha Talur" <atalur at redhat.com>
> > >> > >>> > To: "ABHISHEK PALIWAL" <abhishpaliwal at gmail.com>
> > >> > >>> > Cc: gluster-users at gluster.org, gluster-devel at gluster.org
> > >> > >>> > Sent: Wednesday, March 16, 2016 5:32:26 PM
> > >> > >>> > Subject: Re: [Gluster-users] gluster volume heal info split
> brain
> > >> > >>> command not showing files in split-brain
> > >> > >>> >
> > >> > >>> >
> > >> > >>> >
> > >> > >>> > ----- Original Message -----
> > >> > >>> > > From: "ABHISHEK PALIWAL" <abhishpaliwal at gmail.com>
> > >> > >>> > > To: "Anuradha Talur" <atalur at redhat.com>
> > >> > >>> > > Cc: gluster-users at gluster.org, gluster-devel at gluster.org
> > >> > >>> > > Sent: Wednesday, March 16, 2016 4:39:26 PM
> > >> > >>> > > Subject: Re: [Gluster-users] gluster volume heal info split
> > >> brain
> > >> > >>> command
> > >> > >>> > > not showing files in split-brain
> > >> > >>> > >
> > >> > >>> > > Hi Anuradha,
> > >> > >>> > >
> > >> > >>> > > I am doing the same which is mentioned in the link you
> shared
> > >> and It
> > >> > >>> has
> > >> > >>> > > been resolved the issue.
> > >> > >>> > >
> > >> > >>> > > But my question is if it is the split-brain scenario then
> why
> > >> the
> > >> > >>> command
> > >> > >>> > > "gluster volume heal info split-brain"
> > >> > >>> > >  not showing these files in the output even not the parent
> > >> directory
> > >> > >>> is
> > >> > >>> > > present in split-brain.
> > >> > >>> > >
> > >> > >>> > > Please find the requested logs
> > >> > >>>
> > >> > >>> Abhishek,
> > >> > >>>
> > >> > >>> Yes, ideally it should show. I will look into it. The only
> reason I
> > >> can
> > >> > >>> think of, is when parent directory did not have any pending
> markers
> > >> to
> > >> > >>> indicate split-brain; which is why I asked getfattr output for
> the
> > >> parent
> > >> > >>> directory too. But if the issue is resolved, there isn't much
> info
> > >> we can
> > >> > >>> get out of it. Thanks for sharing the logs. Will see what could
> have
> > >> > >>> caused
> > >> > >>> this.
> > >> > >>>
> > >> > >>> > Abhishek,
> > >> > >>> >
> > >> > >>> > Yes, ideally it should show. I will look into it.
> > >> > >>> > I saw another case with this issue. The parent directory did
> not
> > >> have
> > >> > >>> any pe
> > >> > >>> > >
> > >> > >>> > > On Wed, Mar 16, 2016 at 4:20 PM, Anuradha Talur <
> > >> atalur at redhat.com>
> > >> > >>> wrote:
> > >> > >>> > >
> > >> > >>> > > > Hi Abhishek,
> > >> > >>> > > >
> > >> > >>> > > > The files that are reporting i/o error have gfid-mismatch.
> > >> This
> > >> > >>> situation
> > >> > >>> > > > is called directory or entry split-brain. You can find
> steps
> > >> to
> > >> > >>> resolve
> > >> > >>> > > > this kind of split brain here :
> > >> > >>> > > >
> > >> > >>>
> > >>
> https://gluster.readthedocs.org/en/latest/Troubleshooting/split-brain/ .
> > >> > >>> > > >
> > >> > >>> > > > Ideally, the parent directories of these files have to be
> > >> listed
> > >> > >>> in heal
> > >> > >>> > > > info split-brain output. Can you please get extended
> > >> attributes of
> > >> > >>> parent
> > >> > >>> > > > directories of the files that show i/o error (Same
> getfattr
> > >> > >>> command that
> > >> > >>> > > > you previously used.) ?
> > >> > >>> > > >
> > >> > >>> > > > ----- Original Message -----
> > >> > >>> > > > > From: "ABHISHEK PALIWAL" <abhishpaliwal at gmail.com>
> > >> > >>> > > > > To: "Anuradha Talur" <atalur at redhat.com>
> > >> > >>> > > > > Cc: gluster-users at gluster.org,
> gluster-devel at gluster.org
> > >> > >>> > > > > Sent: Thursday, March 10, 2016 11:22:35 AM
> > >> > >>> > > > > Subject: Re: [Gluster-users] gluster volume heal info
> split
> > >> brain
> > >> > >>> > > > command not showing files in split-brain
> > >> > >>> > > > >
> > >> > >>> > > > > Hi Anuradha,
> > >> > >>> > > > >
> > >> > >>> > > > > Please find the glusterfs and glusterd logs directory
> as an
> > >> > >>> attachment.
> > >> > >>> > > > >
> > >> > >>> > > > > Regards,
> > >> > >>> > > > > Abhishek
> > >> > >>> > > > >
> > >> > >>> > > > >
> > >> > >>> > > > >
> > >> > >>> > > > > On Wed, Mar 9, 2016 at 5:54 PM, ABHISHEK PALIWAL <
> > >> > >>> > > > abhishpaliwal at gmail.com>
> > >> > >>> > > > > wrote:
> > >> > >>> > > > >
> > >> > >>> > > > > > Hi Anuradha,
> > >> > >>> > > > > >
> > >> > >>> > > > > > Sorry for late reply.
> > >> > >>> > > > > >
> > >> > >>> > > > > > Please find the requested logs below:
> > >> > >>> > > > > >
> > >> > >>> > > > > > Remote: 10.32.0.48
> > >> > >>> > > > > > Local : 10.32.1.144
> > >> > >>> > > > > >
> > >> > >>> > > > > > Local:
> > >> > >>> > > > > > #gluster volume heal c_glusterfs info split-brain
> > >> > >>> > > > > > Brick 10.32.1.144:/opt/lvmdir/c2/brick
> > >> > >>> > > > > > Number of entries in split-brain: 0
> > >> > >>> > > > > >
> > >> > >>> > > > > > Brick 10.32.0.48:/opt/lvmdir/c2/brick
> > >> > >>> > > > > > Number of entries in split-brain: 0
> > >> > >>> > > > > >
> > >> > >>> > > > > > Remote:
> > >> > >>> > > > > > #gluster volume heal c_glusterfs info split-brain
> > >> > >>> > > > > > Brick 10.32.1.144:/opt/lvmdir/c2/brick
> > >> > >>> > > > > > Number of entries in split-brain: 0
> > >> > >>> > > > > >
> > >> > >>> > > > > > Brick 10.32.0.48:/opt/lvmdir/c2/brick
> > >> > >>> > > > > > Number of entries in split-brain: 0
> > >> > >>> > > > > >
> > >> > >>> > > > > > auto-sync.sh.
> > >> > >>> > > > > > Here you can see that i/o error is detected. Below is
> the
> > >> > >>> required
> > >> > >>> > > > > > meta
> > >> > >>> > > > > > data from both the bricks.
> > >> > >>> > > > > >
> > >> > >>> > > > > > 1)
> > >> > >>> > > > > > stat: cannot stat
> > >> > >>> '/mnt/c//public_html/cello/ior_files/nameroot.ior':
> > >> > >>> > > > > > Input/output error
> > >> > >>> > > > > > Remote:
> > >> > >>> > > > > >
> > >> > >>> > > > > > getfattr -d -m . -e hex
> > >> > >>> > > > > >
> > >> opt/lvmdir/c2/brick/public_html/cello/ior_files/nameroot.ior
> > >> > >>> > > > > > # file:
> > >> > >>> opt/lvmdir/c2/brick/public_html/cello/ior_files/nameroot.ior
> > >> > >>> > > > > > trusted.afr.dirty=0x000000000000000000000000
> > >> > >>> > > > > >
> trusted.bit-rot.version=0x000000000000000256ded2f6000ad80f
> > >> > >>> > > > > > trusted.gfid=0x771221a7bb3c4f1aade40ce9e38a95ee
> > >> > >>> > > > > >
> > >> > >>> > > > > > Local:
> > >> > >>> > > > > >
> > >> > >>> > > > > > getfattr -d -m . -e hex
> > >> > >>> > > > > >
> > >> opt/lvmdir/c2/brick/public_html/cello/ior_files/nameroot.ior
> > >> > >>> > > > > > # file:
> > >> > >>> opt/lvmdir/c2/brick/public_html/cello/ior_files/nameroot.ior
> > >> > >>> > > > > >
> trusted.bit-rot.version=0x000000000000000256ded38f000e3a51
> > >> > >>> > > > > > trusted.gfid=0x8ea33f46703c4e2d95c09153c1b858fd
> > >> > >>> > > > > >
> > >> > >>> > > > > >
> > >> > >>> > > > > > 2)
> > >> > >>> > > > > > stat: cannot stat '/mnt/c//security/corbasecurity':
> > >> > >>> Input/output
> > >> > >>> > > > > > error
> > >> > >>> > > > > > Remote:
> > >> > >>> > > > > >
> > >> > >>> > > > > > getfattr -d -m . -e hex
> > >> > >>> opt/lvmdir/c2/brick/security/corbasecurity
> > >> > >>> > > > > > # file: opt/lvmdir/c2/brick/security/corbasecurity
> > >> > >>> > > > > > trusted.afr.dirty=0x000000000000000000000000
> > >> > >>> > > > > >
> trusted.bit-rot.version=0x000000000000000256ded2f6000ad80f
> > >> > >>> > > > > > trusted.gfid=0xd298b7a0c8834f3e99abb39741363013
> > >> > >>> > > > > >
> > >> > >>> > > > > > Local:
> > >> > >>> > > > > >
> > >> > >>> > > > > > getfattr -d -m . -e hex
> > >> > >>> opt/lvmdir/c2/brick/security/corbasecurity
> > >> > >>> > > > > > # file: opt/lvmdir/c2/brick/security/corbasecurity
> > >> > >>> > > > > >
> trusted.bit-rot.version=0x000000000000000256ded38f000e3a51
> > >> > >>> > > > > > trusted.gfid=0x890df0f706184b52803fac3242a2f15b
> > >> > >>> > > > > >
> > >> > >>> > > > > > I observed that getfattr command output doesn't show
> all
> > >> the
> > >> > >>> fields
> > >> > >>> > > > > > all
> > >> > >>> > > > > > the times.
> > >> > >>> > > > > >
> > >> > >>> > > > > > Here you can check that gluster split-brain command
> hasn't
> > >> > >>> reported
> > >> > >>> > > > > > any
> > >> > >>> > > > > > split-brains but resulted in IO errors when accessed
> few
> > >> files.
> > >> > >>> > > > > >
> > >> > >>> > > > > > Could you please tell me if "split-brain" command
> doesn't
> > >> > >>> reported
> > >> > >>> > > > > > any
> > >> > >>> > > > > > entry as output, then is there any way through which
> we
> > >> can
> > >> > >>> find out
> > >> > >>> > > > that
> > >> > >>> > > > > > the files are in split-brain if we are getting the IO
> > >> error on
> > >> > >>> those
> > >> > >>> > > > file.
> > >> > >>> > > > > >
> > >> > >>> > > > > >
> > >> > >>> > > > > > Regards,
> > >> > >>> > > > > > Abhishek
> > >> > >>> > > > > >
> > >> > >>> > > > > >
> > >> > >>> > > > > >
> > >> > >>> > > > > > On Thu, Mar 3, 2016 at 5:32 PM, Anuradha Talur <
> > >> > >>> atalur at redhat.com>
> > >> > >>> > > > wrote:
> > >> > >>> > > > > >
> > >> > >>> > > > > >>
> > >> > >>> > > > > >>
> > >> > >>> > > > > >> ----- Original Message -----
> > >> > >>> > > > > >> > From: "ABHISHEK PALIWAL" <abhishpaliwal at gmail.com>
> > >> > >>> > > > > >> > To: gluster-users at gluster.org,
> > >> gluster-devel at gluster.org
> > >> > >>> > > > > >> > Sent: Thursday, March 3, 2016 12:10:42 PM
> > >> > >>> > > > > >> > Subject: [Gluster-users] gluster volume heal info
> split
> > >> > >>> brain
> > >> > >>> > > > command
> > >> > >>> > > > > >> not     showing files in split-brain
> > >> > >>> > > > > >> >
> > >> > >>> > > > > >> >
> > >> > >>> > > > > >> > Hello,
> > >> > >>> > > > > >> >
> > >> > >>> > > > > >> > In gluster, we use the command "gluster volume heal
> > >> > >>> c_glusterfs
> > >> > >>> > > > > >> > info
> > >> > >>> > > > > >> > split-brain" to find the files that are in
> split-brain
> > >> > >>> scenario.
> > >> > >>> > > > > >> > We run heal script (developed by Windriver prime
> team)
> > >> on
> > >> > >>> the
> > >> > >>> > > > > >> > files
> > >> > >>> > > > > >> reported
> > >> > >>> > > > > >> > by above command to resolve split-brain issue.
> > >> > >>> > > > > >> >
> > >> > >>> > > > > >> > But we observed that the above command is not
> showing
> > >> all
> > >> > >>> files
> > >> > >>> > > > > >> > that
> > >> > >>> > > > > >> are in
> > >> > >>> > > > > >> > split-brain,
> > >> > >>> > > > > >> > even though split brain scenario actually exists
> on the
> > >> > >>> node.
> > >> > >>> > > > > >> >
> > >> > >>> > > > > >> > Now a days this issue is seen more often and IO
> errors
> > >> are
> > >> > >>> > > > > >> > reported
> > >> > >>> > > > when
> > >> > >>> > > > > >> > tried to access these files under split-brain.
> > >> > >>> > > > > >> >
> > >> > >>> > > > > >> > Can you please check why this gluster command is
> not
> > >> > >>> showing files
> > >> > >>> > > > under
> > >> > >>> > > > > >> > split-brain?
> > >> > >>> > > > > >> > We can provide you required logs and support to
> > >> resolve this
> > >> > >>> > > > > >> > issue.
> > >> > >>> > > > > >> Hi,
> > >> > >>> > > > > >>
> > >> > >>> > > > > >> Could you paste the output of getfattr -m. -de hex
> > >> > >>> > > > > >> <path-to-files-in-split-brain> from all the bricks
> that
> > >> the
> > >> > >>> files
> > >> > >>> > > > > >> lie
> > >> > >>> > > > in?
> > >> > >>> > > > > >>
> > >> > >>> > > > > >> >
> > >> > >>> > > > > >> > Please reply on this because I am not getting any
> reply
> > >> > >>> from the
> > >> > >>> > > > > >> community.
> > >> > >>> > > > > >> >
> > >> > >>> > > > > >> > --
> > >> > >>> > > > > >> >
> > >> > >>> > > > > >> > Regards
> > >> > >>> > > > > >> > Abhishek Paliwal
> > >> > >>> > > > > >> >
> > >> > >>> > > > > >> > _______________________________________________
> > >> > >>> > > > > >> > Gluster-users mailing list
> > >> > >>> > > > > >> > Gluster-users at gluster.org
> > >> > >>> > > > > >> >
> http://www.gluster.org/mailman/listinfo/gluster-users
> > >> > >>> > > > > >>
> > >> > >>> > > > > >> --
> > >> > >>> > > > > >> Thanks,
> > >> > >>> > > > > >> Anuradha.
> > >> > >>> > > > > >>
> > >> > >>> > > > > >
> > >> > >>> > > > >
> > >> > >>> > > >
> > >> > >>> > > > --
> > >> > >>> > > > Thanks,
> > >> > >>> > > > Anuradha.
> > >> > >>> > > >
> > >> > >>> > >
> > >> > >>> > >
> > >> > >>> > >
> > >> > >>> > > --
> > >> > >>> > >
> > >> > >>> > >
> > >> > >>> > >
> > >> > >>> > >
> > >> > >>> > > Regards
> > >> > >>> > > Abhishek Paliwal
> > >> > >>> > >
> > >> > >>> >
> > >> > >>> > --
> > >> > >>> > Thanks,
> > >> > >>> > Anuradha.
> > >> > >>> >
> > >> > >>>
> > >> > >>> --
> > >> > >>> Thanks,
> > >> > >>> Anuradha.
> > >> > >>>
> > >> > >>
> > >> > >>
> > >> > >>
> > >> > >> --
> > >> > >>
> > >> > >>
> > >> > >>
> > >> > >>
> > >> > >> Regards
> > >> > >> Abhishek Paliwal
> > >> > >>
> > >> > >
> > >> > >
> > >> > >
> > >> > > --
> > >> > >
> > >> > >
> > >> > >
> > >> > >
> > >> > > Regards
> > >> > > Abhishek Paliwal
> > >> > >
> > >> >
> > >> >
> > >> >
> > >> > --
> > >> >
> > >> >
> > >> >
> > >> >
> > >> > Regards
> > >> > Abhishek Paliwal
> > >> >
> > >>
> > >> --
> > >> Thanks,
> > >> Anuradha.
> > >>
> > >
> > >
> > >
> > > --
> > >
> > >
> > >
> > >
> > > Regards
> > > Abhishek Paliwal
> > >
> >
> >
> >
> > --
> >
> >
> >
> >
> > Regards
> > Abhishek Paliwal
> >
>
> --
> Thanks,
> Anuradha.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.gluster.org/pipermail/gluster-devel/attachments/20160323/7ffb2d84/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Gluster_logs3.7z
Type: application/x-7z-compressed
Size: 104181 bytes
Desc: not available
URL: <http://www.gluster.org/pipermail/gluster-devel/attachments/20160323/7ffb2d84/attachment-0001.bin>

More information about the Gluster-devel mailing list