[Gluster-devel] [Gluster-users] Memory leak in GlusterFS FUSE client
Soumya Koduri
skoduri at redhat.com
Tue Jan 5 17:22:25 UTC 2016
On 01/05/2016 05:56 PM, Oleksandr Natalenko wrote:
> Unfortunately, both patches didn't make any difference for me.
>
> I've patched 3.7.6 with both patches, recompiled and installed patched
> GlusterFS package on client side and mounted volume with ~2M of files.
> The I performed usual tree traverse with simple "find".
>
> Memory RES value went from ~130M at the moment of mounting to ~1.5G
> after traversing the volume for ~40 mins. Valgrind log still shows lots
> of leaks. Here it is:
>
> https://gist.github.com/56906ca6e657c4ffa4a1
Looks like you had done fuse mount. The patches which I have pasted
below apply to gfapi/nfs-ganesha applications.
Also, to resolve the nfs-ganesha issue which I had mentioned below (in
case if Entries_HWMARK option gets changed), I have posted below fix -
https://review.gerrithub.io/#/c/258687
Thanks,
Soumya
>
> Ideas?
>
> 05.01.2016 12:31, Soumya Koduri написав:
>> I tried to debug the inode* related leaks and seen some improvements
>> after applying the below patches when ran the same test (but will
>> smaller load). Could you please apply those patches & confirm the
>> same?
>>
>> a) http://review.gluster.org/13125
>>
>> This will fix the inodes & their ctx related leaks during unexport and
>> the program exit. Please check the valgrind output after applying the
>> patch. It should not list any inodes related memory as lost.
>>
>> b) http://review.gluster.org/13096
>>
>> The reason the change in Entries_HWMARK (in your earlier mail) dint
>> have much effect is that the inode_nlookup count doesn't become zero
>> for those handles/inodes being closed by ganesha. Hence those inodes
>> shall get added to inode lru list instead of purge list which shall
>> get forcefully purged only when the number of gfapi inode table
>> entries reaches its limit (which is 137012).
>>
>> This patch fixes those 'nlookup' counts. Please apply this patch and
>> reduce 'Entries_HWMARK' to much lower value and check if it decreases
>> the in-memory being consumed by ganesha process while being active.
>>
>> CACHEINODE {
>> Entries_HWMark = 500;
>> }
>>
>>
>> Note: I see an issue with nfs-ganesha during exit when the option
>> 'Entries_HWMARK' gets changed. This is not related to any of the above
>> patches (or rather Gluster) and I am currently debugging it.
>>
>> Thanks,
>> Soumya
>>
>>
>> On 12/25/2015 11:34 PM, Oleksandr Natalenko wrote:
>>> 1. test with Cache_Size = 256 and Entries_HWMark = 4096
>>>
>>> Before find . -type f:
>>>
>>> root 3120 0.6 11.0 879120 208408 ? Ssl 17:39 0:00
>>> /usr/bin/
>>> ganesha.nfsd -L /var/log/ganesha.log -f /etc/ganesha/ganesha.conf -N
>>> NIV_EVENT
>>>
>>> After:
>>>
>>> root 3120 11.4 24.3 1170076 458168 ? Ssl 17:39 13:39
>>> /usr/bin/
>>> ganesha.nfsd -L /var/log/ganesha.log -f /etc/ganesha/ganesha.conf -N
>>> NIV_EVENT
>>>
>>> ~250M leak.
>>>
>>> 2. test with default values (after ganesha restart)
>>>
>>> Before:
>>>
>>> root 24937 1.3 10.4 875016 197808 ? Ssl 19:39 0:00
>>> /usr/bin/
>>> ganesha.nfsd -L /var/log/ganesha.log -f /etc/ganesha/ganesha.conf -N
>>> NIV_EVENT
>>>
>>> After:
>>>
>>> root 24937 3.5 18.9 1022544 356340 ? Ssl 19:39 0:40
>>> /usr/bin/
>>> ganesha.nfsd -L /var/log/ganesha.log -f /etc/ganesha/ganesha.conf -N
>>> NIV_EVENT
>>>
>>> ~159M leak.
>>>
>>> No reasonable correlation detected. Second test was finished much
>>> faster than
>>> first (I guess, server-side GlusterFS cache or server kernel page
>>> cache is the
>>> cause).
>>>
>>> There are ~1.8M files on this test volume.
>>>
>>> On пʼятниця, 25 грудня 2015 р. 20:28:13 EET Soumya Koduri wrote:
>>>> On 12/24/2015 09:17 PM, Oleksandr Natalenko wrote:
>>>>> Another addition: it seems to be GlusterFS API library memory leak
>>>>> because NFS-Ganesha also consumes huge amount of memory while doing
>>>>> ordinary "find . -type f" via NFSv4.2 on remote client. Here is memory
>>>>> usage:
>>>>>
>>>>> ===
>>>>> root 5416 34.2 78.5 2047176 1480552 ? Ssl 12:02 117:54
>>>>> /usr/bin/ganesha.nfsd -L /var/log/ganesha.log -f
>>>>> /etc/ganesha/ganesha.conf -N NIV_EVENT
>>>>> ===
>>>>>
>>>>> 1.4G is too much for simple stat() :(.
>>>>>
>>>>> Ideas?
>>>>
>>>> nfs-ganesha also has cache layer which can scale to millions of entries
>>>> depending on the number of files/directories being looked upon. However
>>>> there are parameters to tune it. So either try stat with few entries or
>>>> add below block in nfs-ganesha.conf file, set low limits and check the
>>>> difference. That may help us narrow down how much memory actually
>>>> consumed by core nfs-ganesha and gfAPI.
>>>>
>>>> CACHEINODE {
>>>> Cache_Size(uint32, range 1 to UINT32_MAX, default 32633); #
>>>> cache size
>>>> Entries_HWMark(uint32, range 1 to UINT32_MAX, default 100000);
>>>> #Max no.
>>>> of entries in the cache.
>>>> }
>>>>
>>>> Thanks,
>>>> Soumya
>>>>
>>>>> 24.12.2015 16:32, Oleksandr Natalenko написав:
>>>>>> Still actual issue for 3.7.6. Any suggestions?
>>>>>>
>>>>>> 24.09.2015 10:14, Oleksandr Natalenko написав:
>>>>>>> In our GlusterFS deployment we've encountered something like memory
>>>>>>> leak in GlusterFS FUSE client.
>>>>>>>
>>>>>>> We use replicated (×2) GlusterFS volume to store mail (exim+dovecot,
>>>>>>> maildir format). Here is inode stats for both bricks and mountpoint:
>>>>>>>
>>>>>>> ===
>>>>>>> Brick 1 (Server 1):
>>>>>>>
>>>>>>> Filesystem Inodes IUsed
>>>>>>>
>>>>>>> IFree IUse% Mounted on
>>>>>>>
>>>>>>> /dev/mapper/vg_vd1_misc-lv08_mail 578768144
>>>>>>> 10954918
>>>>>>>
>>>>>>> 567813226 2% /bricks/r6sdLV08_vd1_mail
>>>>>>>
>>>>>>> Brick 2 (Server 2):
>>>>>>>
>>>>>>> Filesystem Inodes IUsed
>>>>>>>
>>>>>>> IFree IUse% Mounted on
>>>>>>>
>>>>>>> /dev/mapper/vg_vd0_misc-lv07_mail 578767984
>>>>>>> 10954913
>>>>>>>
>>>>>>> 567813071 2% /bricks/r6sdLV07_vd0_mail
>>>>>>>
>>>>>>> Mountpoint (Server 3):
>>>>>>>
>>>>>>> Filesystem Inodes IUsed IFree
>>>>>>> IUse% Mounted on
>>>>>>> glusterfs.xxx:mail 578767760 10954915 567812845
>>>>>>> 2% /var/spool/mail/virtual
>>>>>>> ===
>>>>>>>
>>>>>>> glusterfs.xxx domain has two A records for both Server 1 and
>>>>>>> Server 2.
>>>>>>>
>>>>>>> Here is volume info:
>>>>>>>
>>>>>>> ===
>>>>>>> Volume Name: mail
>>>>>>> Type: Replicate
>>>>>>> Volume ID: f564e85c-7aa6-4170-9417-1f501aa98cd2
>>>>>>> Status: Started
>>>>>>> Number of Bricks: 1 x 2 = 2
>>>>>>> Transport-type: tcp
>>>>>>> Bricks:
>>>>>>> Brick1: server1.xxx:/bricks/r6sdLV08_vd1_mail/mail
>>>>>>> Brick2: server2.xxx:/bricks/r6sdLV07_vd0_mail/mail
>>>>>>> Options Reconfigured:
>>>>>>> nfs.rpc-auth-allow: 1.2.4.0/24,4.5.6.0/24
>>>>>>> features.cache-invalidation-timeout: 10
>>>>>>> performance.stat-prefetch: off
>>>>>>> performance.quick-read: on
>>>>>>> performance.read-ahead: off
>>>>>>> performance.flush-behind: on
>>>>>>> performance.write-behind: on
>>>>>>> performance.io-thread-count: 4
>>>>>>> performance.cache-max-file-size: 1048576
>>>>>>> performance.cache-size: 67108864
>>>>>>> performance.readdir-ahead: off
>>>>>>> ===
>>>>>>>
>>>>>>> Soon enough after mounting and exim/dovecot start, glusterfs client
>>>>>>> process begins to consume huge amount of RAM:
>>>>>>>
>>>>>>> ===
>>>>>>> user at server3 ~$ ps aux | grep glusterfs | grep mail
>>>>>>> root 28895 14.4 15.0 15510324 14908868 ? Ssl Sep03 4310:05
>>>>>>> /usr/sbin/glusterfs --fopen-keep-cache --direct-io-mode=disable
>>>>>>> --volfile-server=glusterfs.xxx --volfile-id=mail
>>>>>>> /var/spool/mail/virtual
>>>>>>> ===
>>>>>>>
>>>>>>> That is, ~15 GiB of RAM.
>>>>>>>
>>>>>>> Also we've tried to use mountpoint withing separate KVM VM with 2
>>>>>>> or 3
>>>>>>> GiB of RAM, and soon after starting mail daemons got OOM killer for
>>>>>>> glusterfs client process.
>>>>>>>
>>>>>>> Mounting same share via NFS works just fine. Also, we have much less
>>>>>>> iowait and loadavg on client side with NFS.
>>>>>>>
>>>>>>> Also, we've tried to change IO threads count and cache size in order
>>>>>>> to limit memory usage with no luck. As you can see, total cache size
>>>>>>> is 4×64==256 MiB (compare to 15 GiB).
>>>>>>>
>>>>>>> Enabling-disabling stat-prefetch, read-ahead and readdir-ahead
>>>>>>> didn't
>>>>>>> help as well.
>>>>>>>
>>>>>>> Here are volume memory stats:
>>>>>>>
>>>>>>> ===
>>>>>>> Memory status for volume : mail
>>>>>>> ----------------------------------------------
>>>>>>> Brick : server1.xxx:/bricks/r6sdLV08_vd1_mail/mail
>>>>>>> Mallinfo
>>>>>>> --------
>>>>>>> Arena : 36859904
>>>>>>> Ordblks : 10357
>>>>>>> Smblks : 519
>>>>>>> Hblks : 21
>>>>>>> Hblkhd : 30515200
>>>>>>> Usmblks : 0
>>>>>>> Fsmblks : 53440
>>>>>>> Uordblks : 18604144
>>>>>>> Fordblks : 18255760
>>>>>>> Keepcost : 114112
>>>>>>>
>>>>>>> Mempool Stats
>>>>>>> -------------
>>>>>>> Name HotCount ColdCount PaddedSizeof
>>>>>>> AllocCount MaxAlloc Misses Max-StdAlloc
>>>>>>> ---- -------- --------- ------------
>>>>>>> ---------- -------- -------- ------------
>>>>>>> mail-server:fd_t 0 1024 108
>>>>>>> 30773120 137 0 0
>>>>>>> mail-server:dentry_t 16110 274 84
>>>>>>> 235676148 16384 1106499 1152
>>>>>>> mail-server:inode_t 16363 21 156
>>>>>>> 237216876 16384 1876651 1169
>>>>>>> mail-trash:fd_t 0 1024 108
>>>>>>>
>>>>>>> 0 0 0 0
>>>>>>>
>>>>>>> mail-trash:dentry_t 0 32768 84
>>>>>>>
>>>>>>> 0 0 0 0
>>>>>>>
>>>>>>> mail-trash:inode_t 4 32764 156
>>>>>>>
>>>>>>> 4 4 0 0
>>>>>>>
>>>>>>> mail-trash:trash_local_t 0 64 8628
>>>>>>>
>>>>>>> 0 0 0 0
>>>>>>>
>>>>>>> mail-changetimerecorder:gf_ctr_local_t 0 64
>>>>>>> 16540 0 0 0 0
>>>>>>> mail-changelog:rpcsvc_request_t 0 8 2828
>>>>>>>
>>>>>>> 0 0 0 0
>>>>>>>
>>>>>>> mail-changelog:changelog_local_t 0 64 116
>>>>>>>
>>>>>>> 0 0 0 0
>>>>>>>
>>>>>>> mail-bitrot-stub:br_stub_local_t 0 512 84
>>>>>>> 79204 4 0 0
>>>>>>> mail-locks:pl_local_t 0 32 148
>>>>>>> 6812757 4 0 0
>>>>>>> mail-upcall:upcall_local_t 0 512 108
>>>>>>>
>>>>>>> 0 0 0 0
>>>>>>>
>>>>>>> mail-marker:marker_local_t 0 128 332
>>>>>>> 64980 3 0 0
>>>>>>> mail-quota:quota_local_t 0 64 476
>>>>>>>
>>>>>>> 0 0 0 0
>>>>>>>
>>>>>>> mail-server:rpcsvc_request_t 0 512 2828
>>>>>>> 45462533 34 0 0
>>>>>>> glusterfs:struct saved_frame 0 8 124
>>>>>>>
>>>>>>> 2 2 0 0
>>>>>>>
>>>>>>> glusterfs:struct rpc_req 0 8 588
>>>>>>>
>>>>>>> 2 2 0 0
>>>>>>>
>>>>>>> glusterfs:rpcsvc_request_t 1 7 2828
>>>>>>>
>>>>>>> 2 1 0 0
>>>>>>>
>>>>>>> glusterfs:log_buf_t 5 251 140
>>>>>>> 3452 6 0 0
>>>>>>> glusterfs:data_t 242 16141 52
>>>>>>> 480115498 664 0 0
>>>>>>> glusterfs:data_pair_t 230 16153 68
>>>>>>> 179483528 275 0 0
>>>>>>> glusterfs:dict_t 23 4073 140
>>>>>>> 303751675 627 0 0
>>>>>>> glusterfs:call_stub_t 0 1024 3764
>>>>>>> 45290655 34 0 0
>>>>>>> glusterfs:call_stack_t 1 1023 1708
>>>>>>> 43598469 34 0 0
>>>>>>> glusterfs:call_frame_t 1 4095 172
>>>>>>> 336219655 184 0 0
>>>>>>> ----------------------------------------------
>>>>>>> Brick : server2.xxx:/bricks/r6sdLV07_vd0_mail/mail
>>>>>>> Mallinfo
>>>>>>> --------
>>>>>>> Arena : 38174720
>>>>>>> Ordblks : 9041
>>>>>>> Smblks : 507
>>>>>>> Hblks : 21
>>>>>>> Hblkhd : 30515200
>>>>>>> Usmblks : 0
>>>>>>> Fsmblks : 51712
>>>>>>> Uordblks : 19415008
>>>>>>> Fordblks : 18759712
>>>>>>> Keepcost : 114848
>>>>>>>
>>>>>>> Mempool Stats
>>>>>>> -------------
>>>>>>> Name HotCount ColdCount PaddedSizeof
>>>>>>> AllocCount MaxAlloc Misses Max-StdAlloc
>>>>>>> ---- -------- --------- ------------
>>>>>>> ---------- -------- -------- ------------
>>>>>>> mail-server:fd_t 0 1024 108
>>>>>>> 2373075 133 0 0
>>>>>>> mail-server:dentry_t 14114 2270 84
>>>>>>> 3513654 16384 2300 267
>>>>>>> mail-server:inode_t 16374 10 156
>>>>>>> 6766642 16384 194635 1279
>>>>>>> mail-trash:fd_t 0 1024 108
>>>>>>>
>>>>>>> 0 0 0 0
>>>>>>>
>>>>>>> mail-trash:dentry_t 0 32768 84
>>>>>>>
>>>>>>> 0 0 0 0
>>>>>>>
>>>>>>> mail-trash:inode_t 4 32764 156
>>>>>>>
>>>>>>> 4 4 0 0
>>>>>>>
>>>>>>> mail-trash:trash_local_t 0 64 8628
>>>>>>>
>>>>>>> 0 0 0 0
>>>>>>>
>>>>>>> mail-changetimerecorder:gf_ctr_local_t 0 64
>>>>>>> 16540 0 0 0 0
>>>>>>> mail-changelog:rpcsvc_request_t 0 8 2828
>>>>>>>
>>>>>>> 0 0 0 0
>>>>>>>
>>>>>>> mail-changelog:changelog_local_t 0 64 116
>>>>>>>
>>>>>>> 0 0 0 0
>>>>>>>
>>>>>>> mail-bitrot-stub:br_stub_local_t 0 512 84
>>>>>>> 71354 4 0 0
>>>>>>> mail-locks:pl_local_t 0 32 148
>>>>>>> 8135032 4 0 0
>>>>>>> mail-upcall:upcall_local_t 0 512 108
>>>>>>>
>>>>>>> 0 0 0 0
>>>>>>>
>>>>>>> mail-marker:marker_local_t 0 128 332
>>>>>>> 65005 3 0 0
>>>>>>> mail-quota:quota_local_t 0 64 476
>>>>>>>
>>>>>>> 0 0 0 0
>>>>>>>
>>>>>>> mail-server:rpcsvc_request_t 0 512 2828
>>>>>>> 12882393 30 0 0
>>>>>>> glusterfs:struct saved_frame 0 8 124
>>>>>>>
>>>>>>> 2 2 0 0
>>>>>>>
>>>>>>> glusterfs:struct rpc_req 0 8 588
>>>>>>>
>>>>>>> 2 2 0 0
>>>>>>>
>>>>>>> glusterfs:rpcsvc_request_t 1 7 2828
>>>>>>>
>>>>>>> 2 1 0 0
>>>>>>>
>>>>>>> glusterfs:log_buf_t 5 251 140
>>>>>>> 3443 6 0 0
>>>>>>> glusterfs:data_t 242 16141 52
>>>>>>> 138743429 290 0 0
>>>>>>> glusterfs:data_pair_t 230 16153 68
>>>>>>> 126649864 270 0 0
>>>>>>> glusterfs:dict_t 23 4073 140
>>>>>>> 20356289 63 0 0
>>>>>>> glusterfs:call_stub_t 0 1024 3764
>>>>>>> 13678560 31 0 0
>>>>>>> glusterfs:call_stack_t 1 1023 1708
>>>>>>> 11011561 30 0 0
>>>>>>> glusterfs:call_frame_t 1 4095 172
>>>>>>> 125764190 193 0 0
>>>>>>> ----------------------------------------------
>>>>>>> ===
>>>>>>>
>>>>>>> So, my questions are:
>>>>>>>
>>>>>>> 1) what one should do to limit GlusterFS FUSE client memory usage?
>>>>>>> 2) what one should do to prevent client high loadavg because of high
>>>>>>> iowait because of multiple concurrent volume users?
>>>>>>>
>>>>>>> Server/client OS is CentOS 7.1, GlusterFS server version is 3.7.3,
>>>>>>> GlusterFS client version is 3.7.4.
>>>>>>>
>>>>>>> Any additional info needed?
>>>>>
>>>>> _______________________________________________
>>>>> Gluster-users mailing list
>>>>> Gluster-users at gluster.org
>>>>> http://www.gluster.org/mailman/listinfo/gluster-users
>>>
>>>
More information about the Gluster-devel
mailing list