[Gluster-devel] SOLVED - Re: replicate background threads
Anand Avati
anand.avati at gmail.com
Wed Apr 4 19:30:13 UTC 2012
Thanks for the report Ian. I have filed a bug report
https://bugzilla.redhat.com/show_bug.cgi?id=809982
On Wed, Apr 4, 2012 at 4:57 AM, Ian Latter <ian.latter at midnightcode.org>wrote:
>
>
> Sorry;
>
> That "long (unsigned 32bit)" should have been
> "long (signed 32bit)" ... so that's twice that bug has
> bitten ;-)
>
>
> Cheers,
>
>
> ----- Original Message -----
> >From: "Ian Latter" <ian.latter at midnightcode.org>
> >To: "Pranith Kumar K" <pranithk at gluster.com>
> >Subject: [Gluster-devel] SOLVED - Re: replicate
> background threads
> >Date: Wed, 04 Apr 2012 21:51:11 +1000
> >
> > Hello,
> >
> >
> > Michael and I ran a battery of testing today and
> > closed out the two issues identified below (of March
> > 11).
> >
> >
> > FYI RE the "background-self-heal-only" patch;
> >
> > It has been tested now to our satisfaction and
> > works as described/intended.
> >
> >
> >
>
> http://midnightcode.org/projects/saturn/code/glusterfs-3.2.6-background-only.patch
> >
> >
> >
> > FYI RE the 2GB replicate error;
> >
> > >>> 2) Of the file that were replicated, not all were
> > >>> corrupted (capped at 2G -- note that we
> > >>> confirmed that this was the first 2G of the
> > >>> source file contents).
> > >>>
> > >>> So is there a known replicate issue with files
> > >>> greater than 2GB?
> >
> > We have confirmed this issue and the referenced
> > patch appears to correct the problem. We were
> > able to get one particular file to reliably fail at 2GB
> > under GlusterFS 3.2.6, and then correctly
> > transfer it and many other >2GB files, after
> > applying this patch.
> >
> > The error stems from putting the off_t (64bit)
> > offset value into a void * cookie value typecast
> > as long (unsigned 32bit) and then restoring it into
> > an off_t again. The tip-off was a recurring offset
> > of 18446744071562067968 seen in the logs. The
> > effect is described well here;
> >
> >
>
> http://stackoverflow.com/questions/5628484/unexpected-behavior-from-unsigned-int64
> >
> > We can't explain why this issue was intermittent,
> > and we're not sure if the rw_sh->offset is the
> > correct 64bit offset to use. However that offset
> > appeared to match the cookie value in all tested
> > pre-failure states. Please advise if there is a
> > better (more correct) off_t offset to use.
> >
> >
> >
> http://midnightcode.org/projects/saturn/code/glusterfs-3.2.6-2GB.patch
> >
> >
> >
> > Thanks for your help,
> >
> >
> >
> >
> > ----- Original Message -----
> > >From: "Ian Latter" <ian.latter at midnightcode.org>
> > >To: "Pranith Kumar K" <pranithk at gluster.com>
> > >Subject: Re: [Gluster-devel] replicate background threads
> > >Date: Tue, 03 Apr 2012 20:41:48 +1000
> > >
> > >
> > > Pizza reveals all ;-)
> > >
> > > There's an error in there with the LOCK going
> > > without a paired UNLOCK in the afr-common
> > > test. Revised (untested) patch attached.
> > >
> > >
> > >
> > >
> > > ----- Original Message -----
> > > >From: "Ian Latter" <ian.latter at midnightcode.org>
> > > >To: "Pranith Kumar K" <pranithk at gluster.com>
> > > >Subject: Re: [Gluster-devel] replicate background threads
> > > >Date: Tue, 03 Apr 2012 19:46:51 +1000
> > > >
> > > >
> > > > FYI - untested patch attached.
> > > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > >From: "Ian Latter" <ian.latter at midnightcode.org>
> > > > >To: "Pranith Kumar K" <pranithk at gluster.com>
> > > > >Subject: Re: [Gluster-devel] replicate background
> threads
> > > > >Date: Tue, 03 Apr 2012 18:50:11 +1000
> > > > >
> > > > >
> > > > > FYI - I can see that this option doesn't exist, I'm
> > > adding it
> > > > > now.
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > >From: "Ian Latter" <ian.latter at midnightcode.org>
> > > > > >To: "Pranith Kumar K" <pranithk at gluster.com>
> > > > > >Subject: Re: [Gluster-devel] replicate background
> > threads
> > > > > >Date: Mon, 02 Apr 2012 18:02:26 +1000
> > > > > >
> > > > > >
> > > > > > Hello Pranith,
> > > > > >
> > > > > >
> > > > > > Michael has come back from his business trip and
> > > > > > we're about to start testing again (though now under
> > > > > > kernel 3.2.13 and GlusterFS 3.2.6).
> > > > > >
> > > > > > I've published the 32bit (i586) client on the
> Saturn
> > > > > > project site if anyone is chasing it;
> > > > > > http://midnightcode.org/projects/saturn/
> > > > > >
> > > > > > One quick question, is there a tune-able parameter
> > > > > > that will allow a stat to be non blocking (i.e. to
> stop
> > > > > > self-heal going foreground) when the background
> > > > > > self heal count is reached?
> > > > > > I.e. rather than having the stat hang for 2 days
> > > > > > while the files are replicated, we'd rather it fell
> > > > > > through and allowed subsequent stats to attempt
> > > > > > background self healing (perhaps at a time when
> > > > > > background self heal slots are available).
> > > > > >
> > > > > >
> > > > > > Thanks,
> > > > > >
> > > > > >
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > >From: "Ian Latter" <ian.latter at midnightcode.org>
> > > > > > >To: "Pranith Kumar K" <pranithk at gluster.com>
> > > > > > >Subject: Re: [Gluster-devel] replicate background
> > > threads
> > > > > > >Date: Wed, 14 Mar 2012 19:36:24 +1000
> > > > > > >
> > > > > > > Hello,
> > > > > > >
> > > > > > > > hi Ian,
> > > > > > > > Maintaining a queue of files that need to be
> > > > > > > > self-healed does not scale in practice, in cases
> > > > > > > > where there are millions of files that need self-
> > > > > > > > heal. So such a thing is not implemented. The
> > > > > > > > idea is to make self-heal foreground after a
> > > > > > > > certain-limit (background-self-heal-count) so
> > > > > > > > there is no necessity for such a queue.
> > > > > > > >
> > > > > > > > Pranith.
> > > > > > >
> > > > > > > Ok, I understand - it will be interesting to observe
> > > > > > > the system with the new knowledge from your
> > > > > > > messages - thanks for your help, appreciate it.
> > > > > > >
> > > > > > >
> > > > > > > Cheers,
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > >From: "Pranith Kumar K" <pranithk at gluster.com>
> > > > > > > >To: "Ian Latter" <ian.latter at midnightcode.org>
> > > > > > > >Subject: Re: [Gluster-devel] replicate background
> > > > threads
> > > > > > > >Date: Wed, 14 Mar 2012 07:33:32 +0530
> > > > > > > >
> > > > > > > > On 03/14/2012 01:47 AM, Ian Latter wrote:
> > > > > > > > > Thanks for the info Pranith;
> > > > > > > > >
> > > > > > > > > <pranithk> the option to increase the max
> num of
> > > > > > background
> > > > > > > > > self-heals
> > > > > > > > > is cluster.background-self-heal-count. Default
> > > > value of
> > > > > > > > > which is 16. I
> > > > > > > > > assume you know what you are doing to the
> > > performance
> > > > > > of the
> > > > > > > > > system by
> > > > > > > > > increasing this number.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > I didn't know this. Is there a queue length for
> > > what
> > > > > > > > > is yet to be handled by the background self heal
> > > > > > > > > count? If so, can it also be adjusted?
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > ----- Original Message -----
> > > > > > > > >> From: "Pranith Kumar K"<pranithk at gluster.com>
> > > > > > > > >> To: "Ian Latter"<ian.latter at midnightcode.org>
> > > > > > > > >> Subject: Re: [Gluster-devel] replicate
> > background
> > > > > > threads
> > > > > > > > >> Date: Tue, 13 Mar 2012 21:07:53 +0530
> > > > > > > > >>
> > > > > > > > >> On 03/13/2012 07:52 PM, Ian Latter wrote:
> > > > > > > > >>> Hello,
> > > > > > > > >>>
> > > > > > > > >>>
> > > > > > > > >>> Well we've been privy to our first true
> > > error in
> > > > > > > > >>> Gluster now, and we're not sure of the cause.
> > > > > > > > >>>
> > > > > > > > >>> The SaturnI machine with 1Gbyte of RAM was
> > > > > > > > >>> exhausting its memory and crashing and we saw
> > > > > > > > >>> core dumps on SaturnM and MMC. Replacing
> > > > > > > > >>> the SaturnI hardware with identical
> hardware to
> > > > > > > > >>> SaturnM, but retaining SaturnI's original
> disks,
> > > > > > > > >>> (so fixing the memory capacity problem) we saw
> > > > > > > > >>> crashes randomly at all nodes.
> > > > > > > > >>>
> > > > > > > > >>> Looking for irregularities at the file
> > system
> > > > > > > > >>> we noticed that (we'd estimate) about 60% of
> > > > > > > > >>> the files at the OS/EXT3 layer of SaturnI
> > > > > > > > >>> (sourced via replicate from SaturnM) were of
> > > > > > > > >>> size 2147483648 (2^31) where they should
> > > > > > > > >>> have been substantially larger. While we
> would
> > > > > > > > >>> happily accept "you shouldn't be using a 32bit
> > > > > > > > >>> gluster package" as the answer, we note two
> > > > > > > > >>> deltas;
> > > > > > > > >>> 1) All files used in testing were copied
> > > on from
> > > > > > > > >>> 32 bit clients to 32 bit servers,
> > with no
> > > > > > > > >>> observable errors
> > > > > > > > >>> 2) Of the file that were replicated,
> not all
> > > > were
> > > > > > > > >>> corrupted (capped at 2G -- note
> that we
> > > > > > > > >>> confirmed that this was the first 2G
> > > of the
> > > > > > > > >>> source file contents).
> > > > > > > > >>>
> > > > > > > > >>>
> > > > > > > > >>> So is there a known replicate issue with files
> > > > > > > > >>> greater than 2GB? Has anyone done any
> > > > > > > > >>> serious testing with significant numbers of
> > files
> > > > > > > > >>> of this size? Are there configurations
> specific
> > > > > > > > >>> to files/structures of these dimensions?
> > > > > > > > >>>
> > > > > > > > >>> We noted that reversing the configuration,
> such
> > > > > > > > >>> that SaturnI provides the replicate Brick
> > amongst
> > > > > > > > >>> a local distribute and a remote map to SaturnM
> > > > > > > > >>> where SaturnM simply serves a local
> distribute;
> > > > > > > > >>> that the data served to MMC is accurate (it
> > > > > > > > >>> continues to show 15GB files, even where there
> > > > > > > > >>> is a local 2GB copy). Further, a client
> "cp" at
> > > > > > > > >>> MMC, of a file with a 2GB local replicate of a
> > > > > > > > >>> 15GB file, will result in a 15GB file being
> > > > > > > > >>> created and replicated via Gluster (i.e. the
> > > > > > > > >>> correct specification at both server nodes).
> > > > > > > > >>>
> > > > > > > > >>> So my other question is; Is it possible that
> > we've
> > > > > > > > >>> managed to corrupt something in this
> > > > > > > > >>> environment? I.e. during the initial memory
> > > > > > > > >>> exhaustion events? And is there a robust way
> > > > > > > > >>> to have the replicate files revalidated by
> > gluster
> > > > > > > > >>> as a stat doesn't seem to be correcting
> files in
> > > > > > > > >>> this state (i.e. replicate on SaturnM
> results in
> > > > > > > > >>> daemon crashes, replicate on SaturnI results
> > > > > > > > >>> in files being left in the bad state).
> > > > > > > > >>>
> > > > > > > > >>>
> > > > > > > > >>> Also, I'm not a member of the users list; if
> > these
> > > > > > > > >>> questions are better posed there then let me
> > > > > > > > >>> know and I'll re-post them there.
> > > > > > > > >>>
> > > > > > > > >>>
> > > > > > > > >>>
> > > > > > > > >>> Thanks,
> > > > > > > > >>>
> > > > > > > > >>>
> > > > > > > > >>>
> > > > > > > > >>>
> > > > > > > > >>>
> > > > > > > > >>> ----- Original Message -----
> > > > > > > > >>>> From: "Ian
> Latter"<ian.latter at midnightcode.org>
> > > > > > > > >>>> To:<gluster-devel at nongnu.org>
> > > > > > > > >>>> Subject: [Gluster-devel] replicate
> background
> > > > > threads
> > > > > > > > >>>> Date: Sun, 11 Mar 2012 20:17:15 +1000
> > > > > > > > >>>>
> > > > > > > > >>>> Hello,
> > > > > > > > >>>>
> > > > > > > > >>>>
> > > > > > > > >>>> My mate Michael and I have been steadily
> > > > > > > > >>>> advancing our Gluster testing and today we
> > > finally
> > > > > > > > >>>> reached some heavier conditions. The outcome
> > > > > > > > >>>> was different from expectations built from
> > > our more
> > > > > > > > >>>> basic testing so I think we have a couple of
> > > > > > > > >>>> questions regarding the AFR/Replicate
> > background
> > > > > > > > >>>> threads that may need a developer's
> > contribution.
> > > > > > > > >>>> Any help appreciated.
> > > > > > > > >>>>
> > > > > > > > >>>>
> > > > > > > > >>>> The setup is a 3 box environment, but
> lets
> > > > start
> > > > > > > > >>>> with two;
> > > > > > > > >>>>
> > > > > > > > >>>> SaturnM (Server)
> > > > > > > > >>>> - 6core CPU, 16GB RAM, 1Gbps net
> > > > > > > > >>>> - 3.2.6 Kernel (custom distro)
> > > > > > > > >>>> - 3.2.5 Gluster (32bit)
> > > > > > > > >>>> - 3x2TB drives, CFQ, EXT3
> > > > > > > > >>>> - Bricked up into a single local 6TB
> > > > > > > > >>>> "distribute" brick
> > > > > > > > >>>> - "brick" served to the network
> > > > > > > > >>>>
> > > > > > > > >>>> MMC (Client)
> > > > > > > > >>>> - 4core CPU, 8GB RAM, 1Gbps net
> > > > > > > > >>>> - Ubuntu
> > > > > > > > >>>> - 3.2.5 Gluster (32bit)
> > > > > > > > >>>> - Don't recall the disk space
> locally
> > > > > > > > >>>> - "brick" from SaturnM mounted
> > > > > > > > >>>>
> > > > > > > > >>>> 500 x 15Gbyte files were copied
> from MMC
> > > > > > > > >>>> to a single sub-directory on the brick served
> > > from
> > > > > > > > >>>> SaturnM, all went well and dandy. So then we
> > > > > > > > >>>> moved on to a 3 box environment;
> > > > > > > > >>>>
> > > > > > > > >>>> SaturnI (Server)
> > > > > > > > >>>> = 1core CPU, 1GB RAM, 1Gbps net
> > > > > > > > >>>> = 3.2.6 Kernel (custom distro)
> > > > > > > > >>>> = 3.2.5 Gluster (32bit)
> > > > > > > > >>>> = 4x2TB drives, CFQ, EXT3
> > > > > > > > >>>> = Bricked up into a single local 8TB
> > > > > > > > >>>> "distribute" brick
> > > > > > > > >>>> = "brick" served to the network
> > > > > > > > >>>>
> > > > > > > > >>>> SaturnM (Server/Client)
> > > > > > > > >>>> - 6core CPU, 16GB RAM, 1Gbps net
> > > > > > > > >>>> - 3.2.6 Kernel (custom distro)
> > > > > > > > >>>> - 3.2.5 Gluster (32bit)
> > > > > > > > >>>> - 3x2TB drives, CFQ, EXT3
> > > > > > > > >>>> - Bricked up into a single local 6TB
> > > > > > > > >>>> "distribute" brick
> > > > > > > > >>>> = Replicate brick added to sit over
> > > > > > > > >>>> the local distribute brick and a
> > > > > > > > >>>> client "brick" mapped from
> SaturnI
> > > > > > > > >>>> - Replicate "brick" served to the
> > > network
> > > > > > > > >>>>
> > > > > > > > >>>> MMC (Client)
> > > > > > > > >>>> - 4core CPU, 8GB RAM, 1Gbps net
> > > > > > > > >>>> - Ubuntu
> > > > > > > > >>>> - 3.2.5 Gluster (32bit)
> > > > > > > > >>>> - Don't recall the disk space
> locally
> > > > > > > > >>>> - "brick" from SaturnM mounted
> > > > > > > > >>>> = "brick" from SaturnI mounted
> > > > > > > > >>>>
> > > > > > > > >>>>
> > > > > > > > >>>> Now, in lesser testing in this scenario
> > > all was
> > > > > > > > >>>> well - any files on SaturnI would appear on
> > > SaturnM
> > > > > > > > >>>> (not a functional part of our test) and the
> > > > > content on
> > > > > > > > >>>> SaturnM would appear on SaturnI (the real
> > > > > > > > >>>> objective).
> > > > > > > > >>>>
> > > > > > > > >>>> Earlier testing used a handful of smaller
> > > files
> > > > > > (10s
> > > > > > > > >>>> to 100s of Mbytes) and a single 15Gbyte file.
> > > The
> > > > > > > > >>>> 15Gbyte file would be "stat" via an "ls",
> which
> > > > would
> > > > > > > > >>>> kick off a background replication (ls
> > > appeared un-
> > > > > > > > >>>> blocked) and the file would be transferred.
> > > Also,
> > > > > > > > >>>> interrupting the transfer (pulling the LAN
> > cable)
> > > > > > > > >>>> would result in a partial 15Gbyte file being
> > > > > corrected
> > > > > > > > >>>> in a subsequent background process on another
> > > > > > > > >>>> stat.
> > > > > > > > >>>>
> > > > > > > > >>>> *However* .. when confronted with 500 x
> > > 15Gbyte
> > > > > > > > >>>> files, in a single directory (but not the
> root
> > > > > > directory)
> > > > > > > > >>>> things don't quite work out as nicely.
> > > > > > > > >>>> - First, the "ls" (at MMC against the
> > SaturnM
> > > > > > brick)
> > > > > > > > >>>> is blocking and hangs the terminal
> > (ctrl-c
> > > > > > doesn't
> > > > > > > > >>>> kill it).
> > > > > > > > >> <pranithk> At max 16 files can be self-healed
> > > in the
> > > > > > > > > back-ground in
> > > > > > > > >> parallel. 17th file self-heal will happen
> in the
> > > > > > > foreground.
> > > > > > > > >>>> - Then, looking from MMC at the SaturnI
> > file
> > > > > > > > >>>> system (ls -s) once per second,
> and then
> > > > > > > > >>>> comparing the output (diff ls1.txt
> > > ls2.txt |
> > > > > > > > >>>> grep -v '>') we can see that
> between 10
> > > > and 17
> > > > > > > > >>>> files are being updated simultaneously
> > > > by the
> > > > > > > > >>>> background process
> > > > > > > > >> <pranithk> This is expected.
> > > > > > > > >>>> - Further, a request at MMC for a
> > single file
> > > > > that
> > > > > > > > >>>> was originally in the 500 x 15Gbyte
> > > > sub-dir on
> > > > > > > > >>>> SaturnM (which should return
> > unblocked with
> > > > > > > > >>>> correct results) will;
> > > > > > > > >>>> a) work as expected if there are less
> > > > than 17
> > > > > > > > >>>> active background file tasks
> > > > > > > > >>>> b) block/hang if there are more
> > > > > > > > >>>> - Where-as a stat (ls) outside of the 500
> > > x 15
> > > > > > > > >>>> sub-directory, such as the root of
> that
> > > > brick,
> > > > > > > > >>>> would always work as expected (return
> > > > > > > > >>>> immediately, unblocked).
> > > > > > > > >> <pranithk> stat on the directory will only
> > > > create the
> > > > > > > > > files with '0'
> > > > > > > > >> file size. Then when you ls/stat the actual
> > > file the
> > > > > > > > > self-heal for the
> > > > > > > > >> file gets triggered.
> > > > > > > > >>>>
> > > > > > > > >>>> Thus, to us, it appears as though there
> > is a
> > > > > > > > >>>> queue feeding a set of (around) 16 worker
> > threads
> > > > > > > > >>>> in AFR. If your request was to the loaded
> > > > directory
> > > > > > > > >>>> then you would be blocked until a worker was
> > > > > > > > >>>> available, and if your request was to any
> other
> > > > > > > > >>>> location, it would return unblocked
> > regardless of
> > > > > > > > >>>> the worker pool state.
> > > > > > > > >>>>
> > > > > > > > >>>> The only thread metric that we could
> > find to
> > > > > tweak
> > > > > > > > >>>> was performance/io-threads (which was set to
> > > > > > > > >>>> 16 per physical disk; well per locks + posix
> > > brick
> > > > > > > > >>>> stacks) but increasing this to 64 per stack
> > > didn't
> > > > > > > > >>>> change the outcome (10 to 17 active
> background
> > > > > > > > >>>> transfers).
> > > > > > > > >> <pranithk> the option to increase the max
> num of
> > > > > > > > > background self-heals
> > > > > > > > >> is cluster.background-self-heal-count. Default
> > > > value of
> > > > > > > > > which is 16. I
> > > > > > > > >> assume you know what you are doing to the
> > > > > performance of
> > > > > > > > > the system by
> > > > > > > > >> increasing this number.
> > > > > > > > >>>>
> > > > > > > > >>>> So, given the above, is our analysis
> > > sound, and
> > > > > > > > >>>> if so, is there a way to increase the size
> > of the
> > > > > > > > >>>> pool of active worker threads? The objective
> > > > > > > > >>>> being to allow unblocked access to an
> existing
> > > > > > > > >>>> repository of files (on SaturnM) while a
> > > > > > > > >>>> secondary/back-up is being filled, via
> > GlusterFS?
> > > > > > > > >>>>
> > > > > > > > >>>> Note that I understand that performance
> > > > > > > > >>>> (through-put) will be an issue in the
> described
> > > > > > > > >>>> environment: this replication process is
> > > > > > > > >>>> estimated to run for between 10 and 40 hours,
> > > > > > > > >>>> which is acceptable so long as it isn't
> > blocking
> > > > > > > > >>>> (there's a production-capable file set in
> > place).
> > > > > > > > >>>>
> > > > > > > > >>>>
> > > > > > > > >>>>
> > > > > > > > >>>>
> > > > > > > > >>>>
> > > > > > > > >>>> Any help appreciated.
> > > > > > > > >>>>
> > > > > > > > >> Please let us know how it goes.
> > > > > > > > >>>> Thanks,
> > > > > > > > >>>>
> > > > > > > > >>>>
> > > > > > > > >>>>
> > > > > > > > >>>>
> > > > > > > > >>>>
> > > > > > > > >>>>
> > > > > > > > >>>> --
> > > > > > > > >>>> Ian Latter
> > > > > > > > >>>> Late night coder ..
> > > > > > > > >>>> http://midnightcode.org/
> > > > > > > > >>>>
> > > > > > > > >>>>
> _______________________________________________
> > > > > > > > >>>> Gluster-devel mailing list
> > > > > > > > >>>> Gluster-devel at nongnu.org
> > > > > > > > >>>>
> > > > > https://lists.nongnu.org/mailman/listinfo/gluster-devel
> > > > > > > > >>>>
> > > > > > > > >>> --
> > > > > > > > >>> Ian Latter
> > > > > > > > >>> Late night coder ..
> > > > > > > > >>> http://midnightcode.org/
> > > > > > > > >>>
> > > > > > > > >>>
> _______________________________________________
> > > > > > > > >>> Gluster-devel mailing list
> > > > > > > > >>> Gluster-devel at nongnu.org
> > > > > > > > >>>
> > > > > https://lists.nongnu.org/mailman/listinfo/gluster-devel
> > > > > > > > >> hi Ian,
> > > > > > > > >> inline replies with<pranithk>.
> > > > > > > > >>
> > > > > > > > >> Pranith.
> > > > > > > > >>
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Ian Latter
> > > > > > > > > Late night coder ..
> > > > > > > > > http://midnightcode.org/
> > > > > > > > hi Ian,
> > > > > > > > Maintaining a queue of files that need to be
> > > > > > > self-healed does not
> > > > > > > > scale in practice, in cases where there are
> > > millions of
> > > > > > > files that need
> > > > > > > > self-heal. So such a thing is not implemented. The
> > > > idea is
> > > > > > > to make
> > > > > > > > self-heal foreground after a certain-limit
> > > > > > > (background-self-heal-count)
> > > > > > > > so there is no necessity for such a queue.
> > > > > > > >
> > > > > > > > Pranith.
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Ian Latter
> > > > > > > Late night coder ..
> > > > > > > http://midnightcode.org/
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > Gluster-devel mailing list
> > > > > > > Gluster-devel at nongnu.org
> > > > > > >
> > https://lists.nongnu.org/mailman/listinfo/gluster-devel
> > > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Ian Latter
> > > > > > Late night coder ..
> > > > > > http://midnightcode.org/
> > > > > >
> > > > > > _______________________________________________
> > > > > > Gluster-devel mailing list
> > > > > > Gluster-devel at nongnu.org
> > > > > >
> https://lists.nongnu.org/mailman/listinfo/gluster-devel
> > > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Ian Latter
> > > > > Late night coder ..
> > > > > http://midnightcode.org/
> > > > >
> > > > > _______________________________________________
> > > > > Gluster-devel mailing list
> > > > > Gluster-devel at nongnu.org
> > > > > https://lists.nongnu.org/mailman/listinfo/gluster-devel
> > > > >
> > > >
> > > >
> > > > --
> > > > Ian Latter
> > > > Late night coder ..
> > > > http://midnightcode.org/
> > > > _______________________________________________
> > > > Gluster-devel mailing list
> > > > Gluster-devel at nongnu.org
> > > > https://lists.nongnu.org/mailman/listinfo/gluster-devel
> > > >
> > >
> > >
> > > --
> > > Ian Latter
> > > Late night coder ..
> > > http://midnightcode.org/
> > > _______________________________________________
> > > Gluster-devel mailing list
> > > Gluster-devel at nongnu.org
> > > https://lists.nongnu.org/mailman/listinfo/gluster-devel
> > >
> >
> >
> > --
> > Ian Latter
> > Late night coder ..
> > http://midnightcode.org/
> >
> > _______________________________________________
> > Gluster-devel mailing list
> > Gluster-devel at nongnu.org
> > https://lists.nongnu.org/mailman/listinfo/gluster-devel
> >
>
>
> --
> Ian Latter
> Late night coder ..
> http://midnightcode.org/
>
> _______________________________________________
> Gluster-devel mailing list
> Gluster-devel at nongnu.org
> https://lists.nongnu.org/mailman/listinfo/gluster-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-devel/attachments/20120404/00feaf54/attachment-0003.html>
More information about the Gluster-devel
mailing list