[Gluster-devel] [Gluster-users] Gluster on an ARM system

John Mark Walker jwalker at gluster.com
Fri Aug 12 22:55:14 UTC 2011 

Based on the discussions here, I think I should create an ARM resource page/section on the wiki.

Looks like there's more community activity that I thought.

-JM


________________________________
From: Devon Miller [devon.c.miller at gmail.com]
Sent: Friday, August 12, 2011 3:50 PM
To: Charles Williams
Cc: John Mark Walker; gluster-users at gluster.org; gluster-devel at nongnu.org
Subject: Re: [Gluster-users] Gluster on an ARM system

For what it's worth, I've been running 3.2.0 for about 4 months now on ARM processors  (Globalscale SheevaPlug (armv5tel) running Debian squeeze). I have 4 volumes, each running 2 bricks in replicated mode. I haven't seen anything like this.

dcm

On Fri, Aug 12, 2011 at 7:24 AM, Charles Williams <chuck at itadmins.net<mailto:chuck at itadmins.net>> wrote:
As discussed with avati in IRC. I am able to setup a user account on the
ARM box. I have also done a bit more tracing and have attached an strace
of glusterd from startup to peer probe to core dump.

chuck

On 08/11/2011 08:50 PM, John Mark Walker wrote:
> Hi Charles,
>
> We have plans in the future to work on an ARM port, but that won't come to fruition for some time.
>
> I've CC'd the gluster-devel list in the hopes that someone there can help you out. However, my understanding is that it will take some significant porting to get GlusterFS to run in any production capacity on ARM.
>
> Once we have more news on the ARM front, I'll be happy to share it here and elsewhere.
>
> Please send all responses to gluster-devel, as that is the proper place for this conversation.
>
> Thanks,
> John Mark Walker
> Gluster Community Guy
>
> ________________________________________
> From: gluster-users-bounces at gluster.org<mailto:gluster-users-bounces at gluster.org> [gluster-users-bounces at gluster.org<mailto:gluster-users-bounces at gluster.org>] on behalf of Charles Williams [chuck at itadmins.net<mailto:chuck at itadmins.net>]
> Sent: Thursday, August 11, 2011 3:48 AM
> To: gluster-users at gluster.org<mailto:gluster-users at gluster.org>
> Subject: Re: [Gluster-users] Gluster on an ARM system
>
> OK, running glusterd on the ARM box with gdb and then doing a gluster
> peer probe zmn1 I get the following from gdb when glusterd core dumps:
>
> [2011-08-11 12:46:35.326998] D
> [glusterd-utils.c:2627:glusterd_friend_find_by_hostname] 0-glusterd:
> Friend zmn1 found.. state: 0
>
> Program received signal SIGSEGV, Segmentation fault.
> 0x4008e954 in rpc_transport_connect (this=0x45c48, port=0) at
> rpc-transport.c:810
> 810             ret = this->ops->connect (this, port);
> (gdb)
>
>
> On 08/11/2011 10:49 AM, Charles Williams wrote:
>> sorry,
>>
>> that last lines of the debug info should be:
>>
>> [2011-08-11 10:38:21.499022] D
>> [glusterd-utils.c:2627:glusterd_friend_find_by_hostname] 0-glusterd:
>> Friend zmn1 found.. state: 0
>> Segmentation fault (core dumped)
>>
>>
>>
>> On 08/11/2011 10:46 AM, Charles Williams wrote:
>>> Hey all,
>>>
>>> So I went ahead and did a test install on my QNAP TS412U (ARM based) and
>>> all went well with the build and install. The problems started afterwards.
>>>
>>> QNAP (ARM server) config:
>>>
>>> volume management-zmn1
>>>     type mgmt/glusterd
>>>     option working-directory /opt/etc/glusterd
>>>     option transport-type socket
>>>     option transport.address-family inet
>>>     option transport.socket.keepalive-time 10
>>>     option transport.socket.keepalive-interval 2
>>> end-volume
>>>
>>>
>>> zmn1 (Dell PowerEdge) config:
>>>
>>> volume management
>>>     type mgmt/glusterd
>>>     option working-directory /etc/glusterd
>>>     option transport-type socket
>>>     option transport.address-family inet
>>>     option transport.socket.keepalive-time 10
>>>     option transport.socket.keepalive-interval 2
>>> end-volume
>>>
>>>
>>> When I tried to do a peer probe from the QNAP server to add the first
>>> server into the cluster glusterd seg faulted with a core dump:
>>>
>>> [2011-08-11 10:38:21.457839] I
>>> [glusterd-handler.c:623:glusterd_handle_cli_probe] 0-glusterd: Received
>>> CLI probe req zmn1 24007
>>> [2011-08-11 10:38:21.459508] D
>>> [glusterd-utils.c:213:glusterd_is_local_addr] 0-glusterd: zmn1 is not local
>>> [2011-08-11 10:38:21.460162] D
>>> [glusterd-utils.c:2675:glusterd_friend_find_by_hostname] 0-glusterd:
>>> Unable to find friend: zmn1
>>> [2011-08-11 10:38:21.460682] D
>>> [glusterd-utils.c:2675:glusterd_friend_find_by_hostname] 0-glusterd:
>>> Unable to find friend: zmn1
>>> [2011-08-11 10:38:21.460766] I
>>> [glusterd-handler.c:391:glusterd_friend_find] 0-glusterd: Unable to find
>>> hostname: zmn1
>>> [2011-08-11 10:38:21.460843] I
>>> [glusterd-handler.c:3417:glusterd_probe_begin] 0-glusterd: Unable to
>>> find peerinfo for host: zmn1 (24007)
>>> [2011-08-11 10:38:21.460943] D
>>> [glusterd-utils.c:3080:glusterd_sm_tr_log_init] 0-: returning 0
>>> [2011-08-11 10:38:21.461017] D
>>> [glusterd-utils.c:3169:glusterd_peerinfo_new] 0-: returning 0
>>> [2011-08-11 10:38:21.461199] D
>>> [glusterd-handler.c:3323:glusterd_transport_inet_keepalive_options_build] 0-glusterd:
>>> Returning 0
>>> [2011-08-11 10:38:21.465952] D [rpc-clnt.c:914:rpc_clnt_connection_init]
>>> 0-management-zmn1: defaulting frame-timeout to 30mins
>>> [2011-08-11 10:38:21.466146] D [rpc-transport.c:672:rpc_transport_load]
>>> 0-rpc-transport: attempt to load file
>>> /opt/lib/glusterfs/3.2.2/rpc-transport/socket.so
>>> [2011-08-11 10:38:21.466346] D
>>> [rpc-transport.c:97:__volume_option_value_validate] 0-management-zmn1:
>>> no range check required for 'option transport.socket.keepalive-time 10'
>>> [2011-08-11 10:38:21.466460] D
>>> [rpc-transport.c:97:__volume_option_value_validate] 0-management-zmn1:
>>> no range check required for 'option transport.socket.keepalive-interval 2'
>>> [2011-08-11 10:38:21.466570] D
>>> [rpc-transport.c:97:__volume_option_value_validate] 0-management-zmn1:
>>> no range check required for 'option remote-port 24007'
>>> [2011-08-11 10:38:21.467862] D [common-utils.c:151:gf_resolve_ip6]
>>> 0-resolver: returning ip-10.1.0.1 (port-24007) for hostname: zmn1 and
>>> port: 24007
>>> [2011-08-11 10:38:21.468417] D
>>> [glusterd-handler.c:3277:glusterd_rpc_create] 0-: returning 0
>>> [2011-08-11 10:38:21.468576] D
>>> [glusterd-store.c:1728:glusterd_store_create_peer_dir] 0-: Returning with 0
>>> [2011-08-11 10:38:21.468811] D
>>> [glusterd-store.c:981:glusterd_store_handle_new] 0-: Returning 0
>>> [2011-08-11 10:38:21.469130] D
>>> [glusterd-store.c:936:glusterd_store_save_value] 0-: returning: 0
>>> [2011-08-11 10:38:21.469285] D
>>> [glusterd-store.c:936:glusterd_store_save_value] 0-: returning: 0
>>> [2011-08-11 10:38:21.469418] D
>>> [glusterd-store.c:936:glusterd_store_save_value] 0-: returning: 0
>>> [2011-08-11 10:38:21.469490] D
>>> [glusterd-store.c:1842:glusterd_store_peer_write] 0-: Returning with 0
>>> [2011-08-11 10:38:21.497268] D
>>> [glusterd-store.c:1870:glusterd_store_perform_peer_store] 0-: Returning 0
>>> [2011-08-11 10:38:21.497391] D
>>> [glusterd-store.c:1891:glusterd_store_peerinfo] 0-: Returning with 0
>>> [2011-08-11 10:38:21.497469] I
>>> [glusterd-handler.c:3399:glusterd_friend_add] 0-glusterd: connect returned 0
>>> [2011-08-11 10:38:21.497542] D
>>> [glusterd-handler.c:3448:glusterd_probe_begin] 0-: returning 100
>>> [2011-08-11 10:38:21.497791] D
>>> [glusterd-handler.c:3849:glusterd_peer_rpc_notify] 0-management-zmn1:
>>> got RPC_CLNT_CONNECT
>>> [2011-08-11 10:38:21.498576] D
>>> [glusterd-handshake.c:308:glusterd_set_clnt_mgmt_program] 0-: GF-DUMP
>>> (123451501:1) not supported
>>> [2011-08-11 10:38:21.498685] I
>>> [glusterd-handshake.c:317:glusterd_set_clnt_mgmt_program] 0-: Using
>>> Program glusterd clnt mgmt, Num (1238433), Version (1)
>>> [2011-08-11 10:38:21.498777] D
>>> [glusterd-sm.c:893:glusterd_friend_sm_inject_event] 0-glusterd:
>>> Enqueuing event: 'GD_FRIEND_EVENT_CONNECTED'
>>> [2011-08-11 10:38:21.498854] D
>>> [glusterd-handshake.c:274:glusterd_event_connected_inject] 0-: returning 0
>>> [2011-08-11 10:38:21.498927] D [glusterd-sm.c:948:glusterd_friend_sm]
>>> 0-: Dequeued event of type: 'GD_FRIEND_EVENT_CONNECTED'
>>> [2011-08-11 10:38:21.499022] D
>>> [glusterd-utils.c:2627:glusterd_friend_find_by_hostname] 0-glusterd:
>>> Friend zmn1 found.. state: 0
>>>
>>>
>>>
>>> After restarting glusterd on the QNAP box I did a peer status and
>>> recieved the following:
>>>
>>> [admin at NASC123B8 ~]# /opt/sbin/gluster peer status
>>> Number of Peers: 1
>>>
>>> Hostname: zmn1
>>> Uuid: 00000000-0000-0000-0000-000000000000
>>> State: Establishing Connection (Connected)
>>>
>>>
>>> If I stop glusterd on both servers and delete /etc/glusterd on both,
>>> then restart I always get the same result.
>>>
>>> Any ideas?
>>>
>>> thanks,
>>> Chuck
>>> _______________________________________________
>>> Gluster-users mailing list
>>> Gluster-users at gluster.org<mailto:Gluster-users at gluster.org>
>>> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>>
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.org<mailto:Gluster-users at gluster.org>
>> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org<mailto:Gluster-users at gluster.org>
> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users


_______________________________________________
Gluster-users mailing list
Gluster-users at gluster.org<mailto:Gluster-users at gluster.org>
http://gluster.org/cgi-bin/mailman/listinfo/gluster-users


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-devel/attachments/20110812/93aa147b/attachment-0003.html>

More information about the Gluster-devel mailing list