[Gluster-devel] issue with server: frame size (131278) > max (83896)

[chris at velocityservers.com.au]

Hi Anand,

No, i just used gcc as the compiler.

Anand Avati wrote:
> Have you used any special compiler? We had seen this issue a while back.
>
> avati
>
> 2008/10/23, chris at velocityservers.com.au 
> <mailto:chris at velocityservers.com.au> <chris at velocityservers.com.au 
> <mailto:chris at velocityservers.com.au>>:
>
>     HI Guys,
>
>     When i try to transfer a file over the glusterfs storage system, i
>     get the following log from one of my servers -, the other 2
>     servers copy the file without an issue:
>
>     2008-10-23 05:14:36 E
>     [protocol.c:342:gf_block_unserialize_transport] server: frame size
>     (131278) > max (83896)
>     2008-10-23 05:14:36 D [tcp.c:87:tcp_disconnect] server: connection
>     disconnected
>     2008-10-23 05:14:36 D
>     [server-protocol.c:6262:server_protocol_cleanup] server: cleaned
>     up transport state for client 192.168.1.105:1021
>     <http://192.168.1.105:1021>
>     2008-10-23 05:14:36 D [tcp-server.c:257:gf_transport_fini] server:
>     destroying transport object for 192.168.1.105:1021
>     <http://192.168.1.105:1021> (fd=6)
>     2008-10-23 05:14:36 D [tcp-server.c:145:tcp_server_notify] server:
>     Registering socket (6) for new transport object of 192.168.1.105
>     <http://192.168.1.105>
>     2008-10-23 05:14:36 D [ip.c:120:gf_auth] brick: allowed = "*",
>     received ip addr = "192.168.1.105 <http://192.168.1.105>"
>
>     It seems that the file transfers over with a file size of 0.
>
>     Glusterfs-serve.vol :
>
>     # file: /etc/glusterfs/glusterfs-server.vol
>
>     volume brick
>      type storage/posix
>      option directory /mnt/HD_a2/export
>     end-volume
>
>     volume server
>      type protocol/server
>      option transport-type tcp/server
>      option auth.ip.brick.allow *
>      subvolumes brick
>     end-volume
>
>     Glusterfs-client:
>
>     volume remote1
>      type protocol/client
>      option transport-type tcp/client
>      option remote-host 192.168.1.104 <http://192.168.1.104>
>      option remote-subvolume brick
>     end-volume
>
>     volume remote2
>      type protocol/client
>      option transport-type tcp/client
>      option remote-host 192.168.1.106 <http://192.168.1.106>
>      option remote-subvolume brick
>     end-volume
>
>     volume remote3
>      type protocol/client
>      option transport-type tcp/client
>      option remote-host 192.168.1.10 <http://192.168.1.10>
>      option remote-subvolume brick
>     end-volume
>
>     volume mirror0
>      type cluster/afr
>      subvolumes remote1 remote2 remote3
>     end-volume
>
>     Server with issue is 192.168.1.10 <http://192.168.1.10>.
>
>     Could anyone tell me what the issue is.
>
>     Thanks
>
>
>
>
>     _______________________________________________
>     Gluster-devel mailing list
>     Gluster-devel at nongnu.org <mailto:Gluster-devel at nongnu.org>
>     http://lists.nongnu.org/mailman/listinfo/gluster-devel
>
>
>
>
> -- 
> If I traveled to the end of the rainbow
> As Dame Fortune did intend,
> Murphy would be there to tell me
> The pot's at the other end.